129,270 used machines on RESALE, but how to find them? Machine Search
High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. without using a tray or a pad. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100?m and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 50-120mm, height: 120-300mm | max. dimensions for the complete multipack: L(150-720)xW(110-450)xH(120-300)mm | max. speed of the machine in neutral: 50 cycles/minute | total dimensions: L8345xW1460xH2400mm | weight: 5000kg | power: 380V | 6kW (machine) and 380V, 63.75kW (shrink tunnel) | compressed air: 60 liter/min, 6bar. Please note ...
Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XL version for large products, inclusive suitable shrink tunnel. Suitable for dust protection and transport purposes. Low cost packaging solution even for large products of up to W+H
Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): max. speed of the machine in neutral: 10cycles/min | max. product dimensions LxWxH: 1500x1300x600mm | length of sealing blade: 1800mm | chamber dimensions LxBxH: 2000x1800x800mm | conveyer height: 850mm+/-50mm | power: 380V, max. 63kW | compressed air: approx. 6-8bar | machine dimensions and weight: sleeve packer L2418xW2100xH2132mm, 1300kg, shrink tunnel: L3000xW2200xH2090mm, 1600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx ...
High speed SLEEVEshrink machine for multipacks, also suitable for printed film. For round and quadrate containers (bottles, cans, glases). Special film guidance from one roll only. Continuous and smooth film transport. Complete System including shrink tunnel. While moving the products forward the formation of the products is configurated. ? Specifications: Packaging formations: 2x3, 3x4, 3x5, 4x5, 4x6 (depending on product / max. multipack size ca. L500xW600xH350 mm) | max. speed of the machine in neutral: 35 cycles/minute | servo motor control system and 10 LCD Color Operating Touchscreen | strength of film: 60-120?m | film width: up to 600mm | film diameter: 450mm | suitable film type: PE-film | chamber size shrink tunnel: L3000xW700xH450mm | shrinking temperature: 200-280?C | power: 380V, 65kW | compressed air: 1.0m?, 6bar | total dimensions: L15000xW1530xH2500mm (incl. conveyor belts ...
Sleeve packer/film band roller for film wrapping of large products. Including shrinking tunnel. Full automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications: 380V, 21kW | 0.6m?, 6.0bar | max. speed of the machine in neutral: 10 cycles/min | max. product dimensions (mm): W750xH300 | machine dimensions (mm): L5060xW1150xH2000 | weight (net/gross): 1200/1400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Sleeve packer/film band roller for film wrapping of large products or product bundles packed on cardboard trays. Automatic infeed by conveyor and automatic outfeed through shrink tunnel (optional available: SHRINKtunnel-PE-XL). - Technical specifications: OMRON/Japan temperature controller, SICK/Germany sensors, MITSUBISHI/Japan PLC | 380V, 2.2kW | 6.0 Bar / 0.1m?/min | max. speed of the machine in neutral: 20 cycles/min | max. product dimensions (mm): L500xW300xH330 | sealing blade length: 700mm | machine dimensions (mm): L1360xW2720xH1900 | weight (net/gross): 450/530kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from th ...
PRO-Version of our standard Sleeve packer / film band roller with stacking unit for stacking products into 1-5 layers and/or in multi-rows. Suitable for cigarette packs, soap, toothpaste, stationary, etc. Fully automatic infeed of products, automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. Completely closed housing, new design and strong structure. - Technical Specifications (can vary regarding customers specifications !): MITSUBISHI/Japan PLC | 380V, 2kW | 6bar / 0.1m?/min | up to 15 cycles/min | max. product dimensions (mm) L(50-550)xW(50-290)xH(15-250) | machine dimensions (mm) L1300xW2305xH1800 | weight (net/gross): 600/650kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very s ...
Sleeve packer / film band roller for film wrapping of large products. Semi automatic infeed of products, automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. - Technical specifications: 380V, 1.5kW | 6Bar / 0.1m?/min | max. speed of the machine in neutral: 10 cycles/min | max. product dimensions (mm): L500xW300xH330 | sealing blade width: 700mm | machine dimensions (mm): L1370xW920xH1898 | weight (net/gross): 390/450kg. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations fro ...
Sleeve packer / film band roller including stacking unit for stacking products into 1-5 layers and/or in multi-rows. Suitable for cigarette packs, soap, toothpaste, stationary, etc. Fully automatic infeed of products, automatic stacking/collating, automatic film sleeving and automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. - Technical Specifications: 380V, 2kW | 6Bar / 0.1m?/min | max. speed of the machine in neutral: 15 cycles/min | max. pack dimensions (mm): L400xW300xH330 | sealing blade length: 700mm | machine dimensions (mm): L1380xW2700xH1900 | weight (net/gross): 500/580kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for custo ...
Sleevepacker for a full 4-side wrapping of long and very long products like panels, etc. Suitable for single or multipacks. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic Infeed through conveyor, automatic outfeed into optionally available SHRINKtunnel-PE-XL. - Technical Specifications: MITSUBISHI/Japan PLC | 380V, 2kW | 6.0bar, 0.1m?/min | max. speed of the machine in neutral: 25 cycles/min | max. product dimensions (mm): L(unlimited)xW500xH330 | sealing blade length: 700mm | machine dimensions (mm): L2000xW1500xH1900 | weight (net/gross): 500/580kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized mach ...
Automatic Sleeve Labelling Machine with a capacity of up to 100 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | label ?: 28-50 or 50-95 or 95-125mm | label length: 35-300mm | label thickness: 0.035-0.08mm | power: 2kW, machine dimensions: L6000xW1050xH2100mm | weight: 1200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available im ...
Automatic Sleeve Labelling Machine with a capacity of up to 400 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | label ?: 28-50 or 50-95 or 95-125mm | label length: 35-300mm | label thickness: 0.035-0.08mm | power: 2kW | machine dimensions: L6400xW1100xH2600mm | weight: 1500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available i ...
High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (NORDSON glue system) and add a tray underneath the multipack. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100?m and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm | max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm | max. speed of the machine in neutral: 50 cycles/minute | total dimensions: L10070xW1650xH2485mm | weight: 5600kg | power: 380V, 13kW (machine) and 380V, 63.75kW (shr ...
Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications sleeve packer: max. speed of the machine in neutral: 20 cycles/min | max. product dimensions: L(unlimited)xW(W+H max. 600mm)xH(max. 300mm) | film width: max. 1600mm | length of sealing blade: 700mm | operating temperature: up to 200?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 1.8kW | compressed air: approx. 6-8bar | machine dimensions and weight: L2014xW1488xH1850mm, 600kg. Technical specifications shrink tunnel: max. product dimensions: L(unlimited)xW400xH300mm | operating temperature: up to 400?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 20kW | chamber dimensions: LxBxH: 1500x600x4 ...
Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XXL version for very large products, inclusive suitable shrink tunnel. Low cost packaging solution even for large products of up to W+H
Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): 380V, max. 40kW | ca. 6bar | max. speed of the machine in neutral: 8 cycles/min | max. product dimensions (mm): W(ca.1000-1200)xH(ca.500-600) | machine dimensions (mm): L(ca.5600-9500)xW(ca.2000)xH(ca.2000) | weight (net/gross): ca.1400-2400/1600-2700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Sleeve packer/film band roller for film wrapping of large products or product bundles packed on cardboard trays or loose. Automatic infeed by conveyor and automatic outfeed through shrink tunnel (optional available: SHRINKtunnel-PE-XL). - Technical specifications: MITSUBISHI/Japan PLC | 380V, 2kW | 6.0bar / 0.1m?/min | max. speed of the machine in neutral: 14 cycles/min | max. product dimensions (mm): L400xW300xH330 | sealing blade width: 700mm | machine dimensions (mm): L1360xW2720xH1900 | weight (net/gross): 465/550kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are avail ...
Sleeve packer / film band roller for PE film wrapping of large rolls. Incl. shrink tunnel. - Specifications sleeve machine: 220V, 6kW | max. product dimensions (mm): L1000xW230xH230 | sealing blade length: 1500mm | machine dimensions (mm): L1790xW2340xH1985. - Specifications of shrink tunnel: 380V, 35kW | machine dimensions (mm): L2400xW1880xH1720. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
PRO-Version of our standard Sleeve packer / film band roller for film wrapping of large products. Fully automatic infeed of products, automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. Completely closed housing, new design and strong structure. - Technical Specifications (can vary regarding customers specifications !): MITSUBISHI/Japan PLC | 380V, 2kW | 6bar / 0.1m?/min | max. speed of the machine in neutral: 25 cycles/min | max. product dimensions (mm): L(unlimited)xW(200-550)xH(15-250) | machine dimensions (mm): L1375xW1180xH1810 | weight (net/gross): 500/580kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Dev ...
Sleeve packer / film band roller for film wrapping of large products. Fully automatic infeed of products, automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. - Technical specifications: MITSUBISHI/Japan PLC | 380V, 2kW | 6Bar / 0.1m?/min | max. speed of the machine in neutral: 25 cycles/min | max. product dimensions (mm): L700xW500xH330 (W+H
Very compact cut to length and slitting line Single unit consisting out of: 1 - decoiler 5 ton, max diameter of coil: 1000 mm 2 - straightener 3 + 4 rolls, 90 mmnbsp;rolldiameter 3 - shear for cut to length 4 - slitting unit with 5 slitting knives 5 - operator cabinet with CNC control (frequency controlled)
GUILLOTINE REEL SLITTER 60 T, Working width 2.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of, conveyor belt, fork-lift tray to handle the reel before and after splitting, spare knife, Force: 60 T, working width: 2.000 mm. 78.74, working height: 1.250 mm.
GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
GUILLOTINE REEL SLITTER 50 T, Working width 3000 mm, Working height 1500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T, installed power - used power in work: about 60-65% : 15
GUILLOTINE REEL SLITTER 50 T, constructed in sturdy painted steel,, Working width 3.000 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T
GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T
GUILLOTINE REEL SLITTER 35 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x17,5 Ton., No.2 pumps 30+30 lt/min, volume 21+21 ccm, Speed up: 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydrauliC pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer.
Manufacturer: Winfos Model: YC 180 Year of Manufacture: 2010 Type of Machine : Longitudinal Slitting Line In operation since: 2017 Condition: Operational Technical Specifications: - Line length: 24.5 m - Line width: 7.8 m - Material thickness: 1.5 ~ 5.0 mm - Maximum coil diameter: 1.8 m - Coil inner diameter: 640 – 800 mm - Maximum coil width: 1500 mm - Maximum coil weight: 16 MT - Installed power: 253 kW Line Speed: - At 1.5 mm thickness: 110 m/min - At 4.0 mm thickness: 95 m/min Tooling & Accessories: - Knives – 186 pcs total: - Set 1 – 10 mm, Ø307: 26 pcs - Set 2 – 14 mm, Ø315: 66 pcs - Set 3 – 14 mm, Ø315: 50 pcs - New Ø320: 44 pcs - Rubber rings – 93 pcs total: - Set 1 – 25 mm: 31 pcs - 15 mm: 12 pcs - Set 2 – 25 mm: 31 pcs - 15 mm: 18 pcs - Set 3 – 25 mm: 31 pcs - 15 mm: 18 pcs - Slitter knife spacers: 480 pcs - Separator spacers: - Metal: 252 pcs - ...
Equipment consists out of: 1 - decoiler tower with 4 decoilers gt; capacity per decoiler: 3 ton
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Ipeka Made in Finland Description Ipeka 1W slicer oiling system renovated 1839
Height=19 m, Overall length= 90 m, Overall width= 125 m, Producer: Ipeka Made in Finland Description Ipeka Splitter horiszontal industriaal slicer for buns breads and rye buns. Used good working condition Sale on behalf of customer
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Description Hartmann Horizontal Slicer test machine like new Sale on behalf of customer
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Slicing speed: up to 70 pieces per minute Description The thickness of the bread slice is 15 mm easily replaceable blade system 1783
Guillotine, reel slitters for paper and plastics 50 T, Working width 2.500 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulik pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
GUILLOTINE PAPER AND FILM REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
Guillotine, reel slitters for paper and plastics 2500x850mm, Working width 2.500 mm, Working height 850 mm, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 50 T, Working width 3.000 mm, Working height 1.250 mm, No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., Cutting force 2x25 Ton., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50To, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250 ...
Guillotine, reel slitter for paper and plastics 60 T, Working width 3.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 1.500 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitter for paper and plastics 35 T, Working width 2.000 mm, Working height 1.250 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T, availability: now in stock, working width: 2000 mm, conditions: new machine, type: compliant with EU safety regulations
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 850 mm, No.2 pumps flow 30+30 lt/min, Pumps volume 21 + 21 ccm, Speed up to 84 mm/sec, Speed down:(80 Bar) 20-40 mm/sec, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, Oil tank 175 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety cond ...
GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
maximum number of results exceeded
please refine your search
