mori say tajmac used for sale

This DMG MORI NHX 5000 Horizontal Machining center was made in 2018. It is equipped with a CELOS M730UM control unit and has 4 axis. The machine has a spindle speed of 15000 rpm.

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMiscellaneousClamping SystemDIN ISO 7388 CabineFull protection cabinCoolant supplyMulti-jet unit at horizontal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump output: 40 l/min / 10.4 gallon/min at 2 bar / 29 psi for horizontal head (theoretical pump performance) coolant tank capacity: approx.NC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mmTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or ...

This DMG MORI NTX2000/1500SZ Lathe was manufactured in the year 2016 in Japan and has 9715 production hours, of which 4568 are spindle hours. It is equipped with a DMG MORI ERGOline control unit and has 5 axis. The machine has a spindle speed of 5000 rpm.

Working area 1Longitudinal500 mmCross450 mmVertical400 mmGeneralUniversal milling machine, with compound Guideway construction New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataType of main driveAC Drive power (40% DC)20,3 kWDrive power (100% DC)14,5 kWSpeed range20 - 14000 rpmSpindle taperSK 40 DIN 69871 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minMiscellaneousClamping SystemDIN 69872 Floor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmCentre bore 30H6 mmMaximum load (table cen ...

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7400 Kg

Key data: 800 mm, 700 mm, 700 mm

Machine Details Stock-No. 1105-03969 Type of machine Machining Center - Horizontal Make MORI SEIKI Type SH 503/40 Year of manufacture 2000 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis EXW (Incoterms 2000) loaded on Price Technical details x-travel 800 mm Y-Travel 700 mm Z-Travel 700 mm control MTSUBISHI turning speeds 10000 1/min Spindle Drive 30/25 kW Number of tool station 60 BT 40 max. tool length 400 mm max. tool weight 12 kg tool changing time 1,3 sec numbers of pallets 2 Pallet dimension 500x500 360000° mm working diameter max.730 mm table load 0.5 t Rapid Travel X/Y/Z 50 m/min total power requirement 50 kVA weight of the machine approx. 14 t Accessories Chip conveyor Additional information WITH 4 AXIS 360000° AND MORI MSG 805 CONTROL BT 40 10000 TPM MAGASIN 60 TOOLS C ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7400 Kg

turning diameter: max. 356 mm turning length: 1.255 mm control: M 730 BM MAPPS IV greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm distance between spindles: 1.511 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A-8 spindle bore: 91 mm max. bar capacity: 80 mm Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm axis stroke:: x-travel: 260 mm z-travel: 1.345 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 5,5 / 3,7 kW total power requirement: 43 kVA w ...

This MORI SEIKI SL-65C Lathe was manufactured in 1992. It is equipped with a FANUC OT control system and features a XZ travel dimensions of 350x860mm. The machine also counts with a Toolchanger: 12atc. Contact us for more details.

Inv. Num. : 7468 Type: SL-253BMC/500 Producer: DMG MORI SEIKI Created: 2000 Parameters: Control System: Fanuc MSX-501III Duty cycle: 58953 h Hours: 4810 h Maximum turning length: 485 mm Maximum turning diameter over bed: 254 mm Maximum feed speed axis X: 1260 mm/min Maximum feed speed axis Z: 1260 mm/min Minimum main spindle speed: 35 1/min Maximum spindle speed: 3500 1/min Number of tools: 12 pieces Number of axle: 3 Axis X: 235 mm Z axis: 495 mm Rapid traverse of the X and Z axes: 18000/24000 mm/min Total power requirement: 33.6 kW Length: 2405 mm Width: 1760 mm Height: 1890 mm Weight: 4600 kg Equipment: Driven Tools (X/Z) Kitagawa BB210 Chuck 2018: General overhaul of the control system

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minMain driveDrive power (100% DC) 10 kWDrive power (40% DC) 15 kWTorque (100% DC) 63 NmTorque (40% DC) 95 NmSpeed range 20 - 12000 rpmSpindle taper SK40Clamping System DIN ISO 7388-3-A, ADToolchangertoolchangerNumber of tools 24

Key data: 420 mm, 420 mm, 350 mm

Machine Details Stock-No. 1105-03975 Type of machine Machining Center - Vertical Make MORI SEIKI Type TV 400 Year of manufacture 1997 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis EX WORK Technical details x-travel 550 mm control MSC 802 M table surface area 700 x 400 mm y-travel 420 mm Z-Travel 350 mm turning speed range - milling 8000 rpm tool taper BT 30 power capacity - milling spindle 7,5 kW No. of tools in magazin 20 stations feed range 1 - 15000 mm/min Rapid traverse 56000 mm/min total power requirement 10 kW Weight of the machine approx. 2000 kg dimensions of the machine approx. 1,600x1900x2400 mm Additional information control MORI MSG 802 m very nice machine

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Transverse stroke271 mmLongitudinal stroke830 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,3 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

Tsugami Mori BS32(S)-III CNC Swiss Type Lathe Machine is in good working condition

Tool holder type:Collet/ Spannzange ER 40 Tool holder shaft type:ISO 15488-40-A Shank diameter:60 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° rotary tool holder BMT 60 like new and never used. External coolant up to 80 bar.

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmWork spindle (left)Bar diametre80 mmSpindle bore91 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar Straight rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Number of driven tools12 Shank diametre according to DIN 6988040 mmSpeed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightWeight approx.6300 KgDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm RPM of rotary tools:6000 1/min ratio:1:1 Coolant trough compatible up to:80 (ext.) bar Straight rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...

x-travel:800 mm y-travel:460 mm z-travel:510 mm weight of the machine ca.:8 t Vertical Processing Centre

Quality unchecked. Positions on changer: 40

Quality unchecked. Please note! Pick-up is only possible by appointment! Dimensions: Machine: Length: 4500mm Width: 2760mm Height: 2850mm Weight: 15000kg Oil tank: Length: 1200mm Width: 920mm Height: 1500mm Weight: 150kg Chip conveyor Length: 3600mm Width: 1000mm Height: 1450mm Weight: 250kg Transformer: Length: 1150mm Width: 520mm Height: 1250mm Weight: 100kg Pallet: Length: 800mm Width: 600mm Height: 300mm Weight: 50kg

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpmDouble axial driver drill.-mill.-unit on rev.Double axial driven drilling and milling unit on revolver with cyl. junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 r ...

Key data: 630 mm, 800 mm, 850 mm

Year of construction 2012 Control Siemens 840 Dsl Speed [rpm] 18000 Travel X/Y/Z [mm] 630/800/850 Tools & Tools. HSK-A63 Spindle: Motor Spindle Technology Speed 18,000 rpm Power 34 kW Torque 110 Nm Tool holder HSK-A63 NC Rotary Table: B-axis 0.001° Pallet size 500 x 500 mm Pallet load (max.) 600 kg General: Tool magazine 63 stations Rapid traverse in X/Y/Z 100 m/min Equipment/Accessories: Displacement measuring system directly in X/Y/Z (glass scales) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter, temperature control and High pressure, 80 bar Automation pallet changer, 2-fold Workpiece Measurement Probe, Renishaw OMP 60 Mechanical tool breakage detection Oil Mist Extraction Mechanical Separator Set-up operation Electronic handwheel Other equipment Rinsing gun

Quality unchecked. Please note! Pick-up is only possible by appointment! Dimensions: Machine: Length: 5400mm Width: 2760mm Height: 2850mm Weight: 15000kg Chip conveyor: Length: 3600mm Width: 1000mm Height: 1450mm Weight: 250kg Oil tank: Length: 1650mm Width: 1250mm Height: 1650mm Weight: 350kg Transformer: Length: 1100mm Width: 600mm Height: 950mm Weight: 100kg

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 sp ...

Key data: 730 , 730 , 880

CNC controller: M730UM (CELOS) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 880 B-axis degrees: 360º (1º index) Distance spindle nose - table surface mm: 70 - 950 Feed rates m/min: 60 Rapid traverse m/min: 60 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1.000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 37/22 (10/100 %ED) Spindle torque Nm: 250/104 (10/100 %ED) Cooling Cooling through the Spindle Center bar: 15 Tool system Tool holder: SK-40 Tool magazine slots: 40 Max. Tool Diameter With free neighboring places mm: ø170 With occupied neighboring places mm: ø70 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,5 Equipment Chip conveyor Infrared probe Signal lamp High pressure pump Tool breakage probe Working ...

X-travel: 100mm, z-travel: 220mm, max. rotational speed: 5000/min, number of workpiece positions: 14, max. swing: 348mm, max. turning diameter: 150mm, controls: Mitsubishi M730 UM, operational hours counter: 4635h, with handling and fire extinguishing system.

Key data: 600 mm, 500 mm, 500 mm

1 universal machining center DMG-Mori DMU 60 Evo Linear built in 2013 Travel X/Y/Z 600 mm x 500 mm x 500 mm Control Heidenhain ITNC 530 HSCI NC swivel rotary table 600 mm x 500 mm Swivel range B-axis -5° to + 110° C-axis 360° incl. table cooling Spindle speed 20 -18 000 rpm HSK 63 A Tool magazine with 60 slots Infrared Probe TS 649 Laser Tool Measurement IKZ with 40 bar, chip conveyor Electr. Handwheel.

Key data: 200 mm, 220 mm, 280 mm

Control Siemens 840D sl Operate Travel X/Y/Z 200/220/280 mm Spindle speed 42,000 min-1 Tool magazine for 24 tools HSK E32 NC Swivel/Rotary Table IKZ Probe Paper Tape Filter Vacuum Conveyor

Mori Seiki NL 2500 SY. Year 2008. 5 axis machine. Sub-spindle. Turret with 12 stations all of them motorized. Y-axis travel +- 60 mm. C-axis on both spindles. Integrated main spindle motor 18,5 KW. Integrated sub-spindle head motor 11 KW. Direct motor for driven tools 5,5 kW. Motor starting torque 640 N/M. Motors without belts or steps. Main spindle size A2-8. Secondary spindle size A2-6. Bar pitch 80 mm. Main spindle chuck Kitagawa B-210 of 250 mm with metric system. Kitagawa B-165 sub-spindle chuck 170 mm with metric system. Prismatic guides on all axes. Main spindle speed 4.000 rpm. Speed of motorized tools 6.000 rpm. Turning diameter 755 mm. Machinable diameter 365 mm. Machinable length 755 mm. Oil cooler for both Daikin spindles. Mapps 4 automatic conversational programming system. Automatic effort control and tool consumption monit ...

GeneralUniversal Turning Machines; Control: Siemens 840D SL Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTransverse stroke182,5 mmTurning diameter200 mmLongitudinal stroke455 mmClamping chuck diameter max.210 mmMain drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWTorque (100% DC)112 NmSpeed range- 5000 rpmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore74 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist ext ...

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed550 mmSwing diameter over X linear guideways390 mmMax machining diameter300 mmClamping chuck Ø210 mmX travel232,5 mmZ travel410 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmMain drive 1Type of main driveAC Drive power (100% DC)9 kWDrive power (40% DC)11,7 kWSpeed range-4500 rpmTorque (100% DC)108 NmMax. torque (40% DC)140,4 NmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.5500 rpmPower max. (40% DC)5,56 kWSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup modeAlternative Speed TurningTechnology cycle Alternate Spindle Speed (Turning) for the ...

GeneralUniversal milling machine, with compound Guideway construction; Control: CELOS with Siemens 840D sl Operate Working area 1Cross450 mmLongitudinal500 mmVertical400 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-18000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWClamping System DIN ISO 7388-3-A, ADSpindle taper SK40Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmSpecial equipmentSwivel rotary table capable of simultaneous operation Clamping surface D505 x 500 Swivel range -35 to +110°, 360° rotation axis including direct measuring systems B and C axis and level transformation Tool magazine 60 places SK40 Vertical chain with douSpecial equipmentWork area flushing Flush strips on the right side wall, Machine bed rear, cabin left and right front Working ...

Mori Seiki SL 303 MC/1500 cnc lathe Mori Seiki SL 303 MC / 1500. 3-axis machine. Turret with 12 stations, all of them motorized. C axis. Autoblok hydraulic rear window diameter 245 mm. Automatic and programmable doors. Integrated main head motor 22/18.5 KW. Direct motor powered tools 7.5 kW. High chip removal torque 920 N/M. Main head size A2-11. Bar pitch 90 mm. 250 mm Autoblok spindle plate with metric system. Plate with quick change of claws. Independent and programmable tailstock in Z axis movement by hydraulic fixation with M codes. Prismatic guides on all axes. Main head speed 3,000 rpm. Motorized tools speed 3,000 rpm. Turning diameter 755 mm. Machinable diameter 450 mm. Machinable length 1,450 mm. Mapps II conversational automatic programming system. 3D graphic simulation of part and machining times. Automatic effort control and too ...

Mori Say TM626 AC, 5 axial slides, 4 cross slides, double slide pos. 6, pickup spindle, swarf conveyor with vibrating filter device, high pressure coolant system, set of tool holders, auto bar loader L = 3 m, Country of origin: Czech Republic, Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: Iemca PRA 52/32 P

GeneralHorizontal machining centre - Horizontal milling head; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)CabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics A / BRotary pallet storage RS 12Rotary pallet storage RS 12 incl. 10 ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z600/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hSafety Package for Power FailureSafety Package for Power ...

Key data: 635 mm, 510 mm, 460 mm

Control Heidenhain iTNC 530 Travel x/y/z 635 mm / 510 mm / 460 mm Max. spindle speed 18,000 rpm Drive power of the main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Table clamping surface / max. table load 790 mm x 560 mm / 600 kg Tool changer with 30 positions Rapid traverse 30 m/min Total power requirement / machine weight 23 kVA / 4.5 t Space requirement 3.5 m x 4.0 m x 2.7 m

Mori Seiki NL 2500 SMC. Year 2008. 5-axis machine. Subspindle. Turret with 12 stations, all of them motorized. C axis on both spindles. Integrated main head motor 18.5 KW. Integrated 11 KW sub-spindle head motor. Direct motor powered tools 5.5 kW. Engine starting torque 640 N/M. Motors without belts or steps. Main head size A2-8. Secondary head size A2-6. Bar pitch 80 mm. 250 mm main spindle plate with metric system. 170 mm subspindle plate with metric system. Prismatic guides on all axes. Main head speed 4,000 rpm. Motorized tools speed 6,000 rpm. Turning diameter 755 mm. Machinable diameter 365 mm. Machinable length 755 mm. Oil cooler for both Daikin heads. Mapps 4 conversational automatic scheduling system. Automatic effort control and tool consumption monitor. Rapid movement speed 30 m/min in the X and Z axis. Turret change indexin ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (40% DC)13 kWDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Max. torque83 NmTool Magazine with24 PositionsTorque (100% DC)57 NmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

Measuring range X = 200 mm, Z = 400 / 700 mm / Microvision III Spindle type SK50

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - ...

DMG Mori #CTV-250-2nd, Vertical CNC lathe, Siemens Sinumerik 840D control, 28 x 12 table, 60 m/min X, 40 m/min Z, low hours, 2016 CTV 250 CNC vertical turning centre right hand version with control SIEMENS SINUMERIK 840D SLIMline Compact, fast, flexible and highly productive vertical lathe All axes X, Z, C are arranged at the top Large Z-axis stroke - thus machining of short and long workpieces with little set-up, Diameter up to 220 mm Control panel integrated into the machine - little space required