mori say tajmac used for sale

MORI SEIKI MV 65-50 Year 1986 - STROKES (mm) X = 1270 Y = 650 Z = 650 -FANUC 11M CNC control -Tool holder -30 tool warehouse

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm Control: Siemens SlimLine Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 82 / 54 Nm tool taper: SK 40 distance spindle nose and table: 120 - 630 mm work table:: table surface area: 900 x 560 mm max. table load: 600 kg T-slots: 5 work height max.: 850 mm tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8,0 kg feeds:: rapid traverse: 30 m/min feed power: 5 kN feed speeds: max. 30.000 mm/min total power requirement: 32 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 4,0 x 5,0 x 3,0 m Documents: Coolantsystem: elektr. hand wheel: Chip conveyor: CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V The data for this ad was created with ModulM ...

Key data: 630 Siemens, 630 840 D, 800

Pallet length: 630 mm Pallet width: 630 mm Longitudinal X: 800 mm Cross Y: 800 mm Vertical Z: 800 mm Number of pallets: 2   Positions ATC: 120   CNC Brand: Siemens CNC Model: 840 D X – Travel:               800mm Y – Travel:               800mm Z – Travel:               800mm B-Axis indexing:          360° Table Length:             630mm Table Width:              630mm Table load:               1.200Kg Number of pallets:        2 Feed rate X-Axis:         60.000mm/min. Feed rate Y-Axis:         60.000mm/min. Feed rate Z-Axis:      &n ...

Key data: 1100 _Unknown / Other, 600 Celos, 800

Table length: 1100 mm Table width: 600 mm Longitudinal X: 800 mm Cross Y: 530 mm Vertical Z: 510 mm Positions ATC: 40   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Celos X – Travel:               800mm Y – Travel:               530mm Z – Travel:               510mm Table Length:             1.100mm Table Width:              600mm Table load:               1.000Kg Feed rate X-Axis:         30.000mm/min. Feed rate Y-Axis:         30.000mm/min. Feed rate Z-Axis:         30.000mm/min. Spindle Taper:            40ISO/Bt/Mk Power o ...

Key data: 850 Heidenhain, 600 iTNC 530, 640

Table length: 850 mm Table width: 600 mm Longitudinal X: 640 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 X – Travel:              640mm Y – Travel:              600mm Z – Travel:              500mm Table Length:            850mm Table Width:             600mm Table load:              600Kg Feed rate X-Axis:        40.000mm/min. Feed rate Y-Axis:        40.000mm/min. Feed rate Z-Axis:        40.000mm/min. Spindle Taper:           Sk40 ISO/Bt/Mk Power on spindle:        19kW Speeds / ra ...

4 pcs. rope pulleys for counter weight of a FB 225 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 700 Heidenhain, 500 TNC 124, 500

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 124 Make: DMG MORI Type: DMU 50 M Control: HeidenHain TNC 124 YOP: 1998 Optical Digital read out B & C Axis 5 Axis on screen X – Travel:              500mm Y – Travel:              400mm Z – Travel:              400mm Table Length:            700mm Table Width:             500mm Table load:              200Kg Feed rate X-Axis:        5.000mm/min. Feed rate Y-Axis:        5.000mm/min. Feed rate Z-Axis:        5.000mm/min.  ...

With C axis Controller Siemens 840D Turning length:581 mm Turning diameter over cross slide:330 mm Turning diameter:200 mm Spindle speed (min.):5,000 rpm Spindle bore:68 mm Travel distance X-axis: 160 mm Travel distance Z-axis: 450 mm

Table length: 790 mm Table width: 560 mm Longitudinal X: 635 mm Cross Y: 510 mm Vertical Z: 460 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D X – Travel:              635mm Y – Travel:              510mm Z – Travel:              460mm Table Length:            790mm Table Width:             560mm Table load:              600Kg Feed rate X-Axis:        30.000mm/min. Feed rate Y-Axis:        30.000mm/min. Feed rate Z-Axis:        30.000mm/min. Spindle Taper:           SK40 ISO/Bt/Mk Speeds / ranges:         8000Rpm ATC / revo ...

Machine Details Warehouse number 1105-03545 Machine Type Machining Center - Vertical Mori SEIKI brand Type MV 40 B Year of construction 1991 Control type CNC Controller (FANUC 16M) MSG M 4 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock HAGUENAU FRANCE Price Technical details x-travel 800 mm y-travel 410 mm z-travel 510 mm Controller (FANUC 16M) MSG M 4 Rapid traverse X-axis 20 m/min Rapid traverse y - direction 20 m/min Rapid traverse Z-axis 15 m/min Table area 1150 x 450 mm Tool holder BT 40 Number of tool holders 30 tool diameter 80 mm tool length 250 mm tool weight 8 kg Speed range 10000 1/min Total power requirement 5.5 / 7.5 kW Machine weight approx. 6 t Information SUPER MACHINE CNC MORI MSG M 4 FANUC 16 WITH 4 AXIS NIKKEN

Turning diameter: 680 mm Turning length: 635 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D Max. turning Ø:  680mm X-Axis:          260mm Y-Axis:          40mm Z-Axis:          635mm Spindle bore:    68mm Speedrange:      5000Rpm Spindle power:   35kW Subspindle speeds:7000Rpm ATC / revolver:  12 Chip conveyor:   Yes  Length:          4.900 mm  Width:           2.500 mm  Height:          2.100 mm  Weight:          6.500 kg 

Turning diameter: 520 mm Turning length: 625 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 16 T Max. turning Ø: 520mm X-Axis:         160mm Z-Axis:         590mm Spindle bore:   78mm Speedrange:     3500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:2000Rpm Pinole taper:   4Mk Stroke pinole:  100mm Quill Ø:        110mm Length:         3.300 mm  Width:          2.000 mm  Height:         2.000 mm  Weight:         5.500 kg 

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A perm ...

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A perm ...

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

Working area Max. swing: 650 mm Swing over cross slides: 465 mm Max. turning diameter: 400 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X/Z) : 30/30 m/min Main Spindle Spindle head (flat flange): 170 h5 mm Bar capacity: ? 65 mm / ? 75 mm Spindle diameter in the front bearing: 130 mm Chuck: 250/315 Drive power (40/100% ED): 17.5 kW/12.5 kW Maximum torque (40/100% ED): 370 Nm/280 Nm Maximum speed: 4000 rpm Tool holder To ISO 230-2 in X/Z axes (indirect measurment system) : 8/8 ?m To ISO 230-2 for C axis: 20 ?m Tool holder Number of toll stations: 12 of which driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm Controls SIMline withOperate on SIEMENS 840D solutionline Weight: 5800 kg

Control MSX-711-MAPPS IV Double pallet changer. Pallet diameter 500 mm. 2 axes NC swivel round table. B-axis 0.001 / 360. A axle +30/-120 - 0.001. travel distances: X 730 mm, Y 850 mm, Z 1,100 mm. preshoot/ejem up to 50,000 mm/min. Spindle holder HSK-63A. Spindle speeds up to 12,000 rpm. Tool magazine positions: 120. IKZ. Probe. tool load measurement. tool breakage control. usw... Little operating hours - Super condition.; Super

Table length: 630 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 450 mm Vertical Z: 400 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 X – Travel:              500mm Y – Travel:              450mm Z – Travel:              400mm A – Axis:                - 5 to + 115 ° Table Length:            630mm Table Width:             500mm Table load:              400Kg Feed rate X-Axis:        30.000mm/min. Feed rate Y-Axis:        30.000mm/min. Feed rate Z-Axis:        30.000mm/min. Spindle Taper:          & ...

MSX-711-MAPPS IV CNC Control Twin pallet changer. Pallet diameter 500 mm. 2-Axis NC Rotary / Swivelling table. B-Axis 0.001° / 360°. A-Axis +30°/-120° - 0.001°. Travels : X 730 mm, Y 850 mm, Z 1100 mm. Feeds / Rapids to 50000 mm/min. Spindle taper HSK-63A. Spindle speeds to 12000 rpm. 120 station tool magazine. Coolant through the spindle. Measuring probe. Tool length measurement. Tool breakage control. etc... Low run hours - Superb condition. ; Super

Turning diameter: 400 mm Turning length: 600 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D Max. turning Ø: 400mm X-Axis:         267,5 mm Z-Axis:         500mm Spindle bore:   91mm Speedrange:     4000Rpm Spindle power:  17,5 kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  yes  Pinole taper:   4Mk Length:         3.500 mm  Width:          2.400 mm  Height:         2.400 mm  Weight:         5.000 kg 

Working area Max. swing: 650 mm Swing over cross slides: 465 mm Max. turning diameter: 400 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X/Z) : 30/30 m/min Main Spindle Spindle head (flat flange): 170 h5 mm Bar capacity: ? 65 mm / ? 75 mm Spindle diameter in the front bearing: 130 mm Chuck: 250/315 Drive power (40/100% ED): 17.5 kW/12.5 kW Maximum torque (40/100% ED): 370 Nm/280 Nm Maximum speed: 4000 rpm Tool holder To ISO 230-2 in X/Z axes (indirect measurment system) : 8/8 ?m To ISO 230-2 for C axis: 20 ?m Tool holder Number of toll stations: 12 of which driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm Controls SIMline withOperate on SIEMENS 840D solutionline Weight: 5800 kg

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

Turning diameter: 650 mm Turning length: 600 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D DMG MORI - ecoTurn 450 CNC Lathe Ø 650 x 600 mm C-Axis Live Tools MACH - ID 6373 Make: DMG MORI Type: ecoTurn 450 Control: SIEMENS 840D YOP: 2016 Max. turning Ø    650 mm X-Axis         267,50 mm Z-Axis          600 mm Spindle bore        65 mm Speedrange          4000 Rpm Spindle power      17,5 kW ATC / revolver      12 Speed live tools     4000 Rpm Control         Siemens Chip conveyor       Yes Pinole taper           5 Mk Length    4.200 mm Width      2.875 mm Height&nbs ...

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

Table length: 450 mm Table width: 0 mm Longitudinal X: 700 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 16   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: DMG MACH-id     5320 MAKE         DMG Mori TYPE           DMU 40 monoBLOCK YOP             2008 SPECIFICATIONS X - Trave       l700 mm Y - Travel       400 mm Z - Travel        400 mm A - Axis      360 ° B - Axis   + 30 / - 120 ° Table load           250 Kg Table Ø      450 mm Feed rate X-Axis      50.000 mm/min. Feed rate Y-Axis       50.000 mm/min. Feed rate Z-Axis        50.000 mm/min. Feed r ...

Table Size : 2250 x 1000 mm Travels X,Y,Z : 2050 x 1000 x 700 mm Distance between columns : 1200 mm Rapid feeds X, Y, Z : 40 / 30 / 24 m/min Spindle Taper : BT40 Big Plus Spindle speed : 20 000 Rpm Number of tools : 40 Control Unit Fanuc 18M

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

YEAR: 08/2004 LONGITUDINAL CORSA: X 800 MM TRANSVERSE COURSE: Y 700 MM VERTICAL COURSE: Z 700 MM ASSE B INDEXED 1st PALLET (2) 500X500 MM CNC MAPPS MSG-501 TOOL WAREHOUSES 60 LOCATIONS ATTACK MANDRINO BT40 MANDRINO MASSIMA VELOCITY 12000 RPM POWER OF MANDRINO'S POWER 26 KW

Working area Max. swing: 650 mm Swing over cross slides: 465 mm Max. turning diameter: 400 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X/Z) : 30/30 m/min Main Spindle Spindle head (flat flange): 170 h5 mm Bar capacity: ? 65 mm / ? 75 mm Spindle diameter in the front bearing: 130 mm Chuck: 250/315 Drive power (40/100% ED): 17.5 kW/12.5 kW Maximum torque (40/100% ED): 370 Nm/280 Nm Maximum speed: 4000 rpm Tool holder To ISO 230-2 in X/Z axes (indirect measurment system) : 8/8 ?m To ISO 230-2 for C axis: 20 ?m Tool holder Number of toll stations: 12 of which driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm Controls SIMline withOperate on SIEMENS 840D solutionline Weight: 5800 kg

Working area Circulation diameter over bed web cover: 700 mm Max turning diameter: 410 mm Max turning length: 800 mm Rod passage: 65 (76) mm Chuck diameter: 250 (315) mm Flat stroke: 300 mm Longitudinal stroke: 850 mm Feeds Rapid response X/Z axles: 60/30 m/min Y axis 22.5 m/min Max. spindle motor speed: 6,000 rpm Main Spindle Spindle head (flat flange): 170 h5 mm Spindle diameter in the front bearing: 130 mm Spindle bore: 87 mm Main drive Power of the three-phase main drive 25 kW Torque (100% ED) 280 Nm Speed range 25 - 5000 1/min Drive power rating (100% DC): 35 kW(AC) Counter spindle: ISM 52 ISM 76 synchronous Spindle head (flat flange) : 140 h5 mm 170 h5 mm Spindle diameter in the front bearing: 100 mm 130 mm Spindle bore: 73 mm 87 mm Counter spind ...

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Turning diameter: 420 mm Turning length: 750 mm Turret positions: 10 CNC Brand: Mori Control CNC Model: Maps MACH-id      5025 MAKE           Mori Seiki Japan TYPE              NL 3000 MC / 750 YOP                 2007 SPECIFICATIONS Max. turning  Ø     420 mm X-Axis         280 mm Z-Axis          820 mm Spindle bore       105 mm Speedrange       3000 Rpm Spindle power        22 kW Subspindle speeds        5.5 Rpm ATC / revolver        10 Speed live tools         6000 Rpm Control         MAPS Chip conveyor  &nbs ...

Turning diameter: 700 mm Turning length: 1425 mm Turret positions: 40 CNC Brand: _Unknown / Other CNC Model: DMG Ergoline MACH-id    5333 MAKE         DMG MORI TYPE           CTX BETA 1250 YOP              2011 SPECIFICATIONS Max. turning diameter Ø     700 mm DBC Turning length        1425 mm X-Axis       300 mm Z-Axis       1300 mm C-Axis        360000 ° Spindle bore      95 mm Main Spindle speed       4000 Rpm ATC / revolver     40 Speed live tools     4000 Rpm Power live tools        12 kW Control        SIEMENS 840D SHOP TURN Chip conveyor     ...

Working area Circulation diameter over bed web cover: 700 mm Max turning diameter: 410 mm Max turning length: 800 mm Rod passage: 65 (76) mm Chuck diameter: 250 (315) mm Flat stroke: 300 mm Longitudinal stroke: 850 mm Feeds Rapid response X/Z axles: 60/30 m/min Y axis 22.5 m/min Max. spindle motor speed: 6,000 rpm Main Spindle Spindle head (flat flange): 170 h5 mm Spindle diameter in the front bearing: 130 mm Spindle bore: 87 mm Main drive Power of the three-phase main drive 25 kW Torque (100% ED) 280 Nm Speed range 25 - 5000 1/min Drive power rating (100% DC): 35 kW(AC) Counter spindle: ISM 52 ISM 76 synchronous Spindle head (flat flange) : 140 h5 mm 170 h5 mm Spindle diameter in the front bearing: 100 mm 130 mm Spindle bore: 73 mm 87 mm Counter spind ...

Turning diameter: 400 mm Turning length: 500 mm Turret positions: 12 CNC Brand: Siemens CNC Model: SIEMENS 840D Max. turning Ø: 400mm X-Axis:         267mm Z-Axis:         500mm Spindle bore:   91mm Speedrange:     4000Rpm Spindle power:  18kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5,5kW Chip conveyor:  Yes Tool eye:       Yes Pinole taper:   4Mk Stroke pinole:  120mm Quill Ø:        120mm Length:         3500mm Width:          2300mm Height:         2100mm Weight:         5000kg

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

Turning diameter: 700 mm Turning length: 800 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 4   CNC Brand: Siemens CNC Model: 840 D SL MACH-id      5220 MAKE           DMG MORI TYPE             CTX 800 BETA YOP                2011 SPECIFICATIONS Max. turning diamter Ø      410 mm Swing        700 Ø DBC Turning length      800 mm X-Axis        290 mm Y-Axis        800 mm Z-Axis         60 mm C-Axis        360000 ° Spindle bore      76 mm Main Spindle speed         5000 Rpm ATC / revolver       12 Speed live tools  &nbs ...

Table length: 450 mm Table width: 350 mm Longitudinal X: 450 mm Cross Y: 400 mm Vertical Z: 480 mm Positions ATC: 16   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: DMG ErGOline MACH-id    5182 MAKE         DMG MORI TYPE           DMU 40 monoBLOCK YOP             2008 SPECIFICATIONS Spindle Taper ISO/Bt/Mk      HSK 63 ISO/Bt/Mk kW power on spindle        19 kW X - Travel        450 mm Control            iTNC 530 Y - Travel        400 mm Z - Travel         480 mm Table Length x Width     450 mm Table load in kG       350 Kg Speeds / ranges       24.000 Rpm ATC / rev ...

Table length: 480 mm Table width: 480 mm Longitudinal X: 400 mm Cross Y: 400 mm Vertical Z: 375 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 MACH-id   5150 MAKE       DMG MORI TYPE         DMU 40 eVo YOP           2015 SPECIFICATIONS Spindle Taper ISO/Bt/Mk    40 ISO/Bt/Mk kW power on spindle      25 kW X - Travel     400 mm Control         HeidenHain iTNC 530 Y - Travel     400 mm Z - Travel      375 mm Table Length x Width        480 x 480 mm Table load in kG     250 Kg Speeds / ranges        18.000 Rpm ATC / revolver         30 Number of controlled axis  ...

Table length: 900 mm Table width: 900 mm Longitudinal X: 850 mm Cross Y: 1050 mm Vertical Z: 850 mm Positions ATC: 40   Positions APC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 MACH-id     5152 MAKE         DMG MORI TYPE           DMU 80 P duoBLOCK YOP             2012 SPECIFICATIONS kW power on spindle      26 kW X - Travel         850 mm Control          Heidenhain iTNC 530 Y - Travel      1050 mm Z - Travel       850 mm Table Length x Width        900 mm Table load in kG       1800 Kg Speeds / ranges        24.000 Rpm ATC / revolver      40 Coolant true spindle / Bar  & ...

Table length: 800 mm Table width: 700 mm Longitudinal X: 800 mm Cross Y: 650 mm Vertical Z: 400 mm Positions ATC: 40   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D Ergoline MACH-id   5147 MAKE       DMG TYPE         DMU 80 Evo SERIAL     15485589724 YOP            2013 SPECIFICATIONS X - Travel     800 mm Control         Siemens 840 D Ergoline Y - Travel        650 mm Z - Travel        400 mm Table Length x Width          700 x 800 mm Speeds / ranges       14.000 Rpm ATC / revolver       40 Number of controlled axis       5

Longitudinal X: 2600 mm Cross Y: 700 mm Vertical Z: 700 mm Positions ATC: 12   CNC Brand: Heidenhain CNC Model: iTNC 530 X – Travel:               2.600mm Y – Travel:               700mm Z – Travel:               700mm A – Axis:                 360000° B – Axis:                 +/- 110 ° Table Length:             2.900mm Table Width:              700mm Table load:               2.150Kg Table  Ø:                 750mm Feed rate X-Axis:         40.000mm/min. Feed rate Y-Axis:&n ...

Turning diameter: 400 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D Ergoline MACH-id   5146 MAKE        DMG Mori TYPE          CTX Beta 500 SERIAL       00460001801 YOP             2016 SPECIFICATIONS Swing        400 Control        Siemens 840 D Ergoline Chip conveyor   Yes Working hours      3.330 H Max. turning diamter Ø     400 mm DBC Turning length      550 mm Main Spindle speed     5.000 ATC / revolver    12

x-travel: 800 mm y-travel: 500 mm z-travel: 600 mm control: FANUC 15 M turning speeds: 6000 U/min 0: 7,5/5,5 kW rapid traverse: 24 m/min total power requirement: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,5x3,0x2,8 m double table: tool probe: swarf conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.