molding used for sale

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +2.Aggregat+ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumula ...

many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available

Injection molding machine ENGEL ES570 for clamping forcé 125 Tons from 1999 in working conditions. Further information please contact. Good price for liquidation. Directly from the factory where they were working.

IMPCO used blow molding machines -Model : BD30 -Screw diameter : 100mm -Manufactured year `1997 & 2000 -Quantity : 2 units Produce 5 gallon (20 liter) PC bottles

PLASTIC MOLDING MACHINE FOR CONSTRUCTION POWER: 600 TON FLOOR FROM 1130 X 1130 MM SWITCHING BETWEEN COLUMNS: 730 X 730 MM

ENGEL 120 ton year `2014 x 2 units injection molding machines -Model : VC330/120 TECH PRO -Clamping force : 120 ton -Screw diamter : 30mm -Manufactured year : 2014

Injection Molding 300T Wittmann, 2017 year at Germany. EcoPower 55 – 550 t EcoPower Xpress 160 – 550 t MicroPower 15 t MacroPower 400 – 2000 t SmartPower 25 – 400 t CM 40 – 80 t VM R 40 – 300 t VM 60 – 200 t VPower 120 – 300 t R

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

ENGEL E-DUO 1340/700 (700 ton & 60mm screw) injection molding machine

ALREADY SOLD MORE MACHINES COMING SOON BMB High Tonnage Injection Molding Machine 1000 Tons Model KW 1000 / 7500 Year of Manufacture 2000 Voltage 400 Frequency 50hz Availability, ready to load See pictures please

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.

SUMITOMO full electric SE50EV (50 ton) 2013 x 2 units used injection molding machine for sale. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 520C 1600-350 with Multilift Control Selogica Year of manufacture: 2001 operating hours: 55400 h constantly maintained (until 2022 by Arburg) Special features/extras: -Multilift Robot Closing side: Clamping force: 1600 kN/ 160 tons tie bar size hxv 520 x 520 mm platen size hxv: 728 x 728 mm Installation height min: 250 mm platen distance max: 900 mm opening stroke: 650 mm ejector stroke: 225 mm ejector force: 66 kN Injection side screw diameter 45 mm Stroke volume 230 ccm injection weight: 210 gr./hp injection pressure: 1670 bar dimensions: 5750 x 1950 x 2350 mm (L x W x H) Weight: 6.500 kg. - from week 48 2022 immediately available in our warehouse Hannover/Germany - Function tested (guaranteed function until first start-up)

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Injection moulding machine Demag Ergotech 25/280-35 Parameters: Production year: 2006 Injection unit: .../35 Screw diameter: 18 mm Specific injection pressure: 2099 bar Injection weight: 20 g Pump motor power: 7.5 kW Cylinder heating band power: 5 kW Tool closure system: 250/... Clamping force: 25 t Tool plate dimensions: 460 x 450 mm Distance between columns: 280 x 280 mm Ejector stroke: 100 mm General data: Weight: 2520 kg Dimensions (m) LxWxH: 3,3 x 1,2 x 2,0 m Net price given. We invite you to our other auctions where you will find other peripherals and injection machines. europnet.eu

KRAUSS MAFFEI KM3200/24500 (3200 ton) injection molding machines for bumper. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

This injection molding machine from Dr. Boy is in good condition. The machine is from 2022 and has few working hours. – Brand: Dr. Boy – Model: XS – Year of construction: 2022 – Screw diameter: 18 mm – Shot volume: 15.3 cm³ – Closing force: 10 T – Working hours: < 25

Injection molding machine Manufacturer: Arburg Type: 320 S 50-60 Year of construction: 1997 Screw: 18 mm Clamping force max.: 500 kN Max. opening distance: 350 mm Tool installation height min.: 225 mm Tool clamping plates (WxH): 498 x 498 mm Weight bew. Half weight max.: 400 kg Effective screw length L/D: 24 Worm travel max.: 110 mm Moulded part weight max. g/PS: 45 Spray pressure max.: 2500 bar Worm torque max.: 325 Nm Screw circumferential speed max.: 54 m/min. Capacity granule container: 50 litres Horizontal injection position max.: 120 mm As an accessory, a removal is included. A screw with a diameter of 18 mm is mounted in the machine. The machine is fully functional and has always been maintained by Arburg.

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2003 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2230/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 110 mm Fuel tank capacity OIL: 190 l www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2006 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2236/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 32 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 120 mm Fuel tank capacity OIL: 190 l www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 85 t Year of construction: 2006 Screw diameter: 25/30 mm Spec. Spray pressure: 2253/2289 bar Clamping unit: 850/... Clamping force:: 85 t Lights spar spacing: 420 x 420 mm Aperture travel: 550 mm Max. plate spacing: 750 mm Ejector travel: 300 mm www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 200 t Year of construction: 2007 Screw diameter: 40 mm Spec. Injection pressure: 2329 bar Clamping unit: 2000/... Clamping force:: 200 t Lights spar spacing: 750 x 750 mm Aperture travel: 700 mm Max. plate spacing: 1000 mm Ejector travel: 260 mm www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 75 t Year of construction: 2003 Screw diameter: 30 mm Spec. Spray pressure: 2500 bar Clamping unit: 750/... Clamping force: 75 t Lights spar spacing: 405 x 380 mm Aperture travel: 320 mm Max. plate spacing: 480 mm Ejector travel: 250 mm www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2000 Injection unit: .../111 Screw diameter: 25 mm Spec. Spray pressure: 2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 165 mm Fuel tank capacity OIL: 190 l www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 30 t Year of construction: 2003 Screw diameter: 18 mm Spec. Spray pressure: 2500 bar Clamping unit: 300/... Clamping force: 30 t Lights spar spacing: 300 x 300 mm Aperture travel: 250 mm Max. plate spacing: 330 mm Ejector travel: 140 mm www.europnet.eu

Krauss Maffei KM 2000-17200 MX Injection Molding Machine Krauss Maffei robot - LR 500 Year of production - 2007 Hydraulic-mechanical double-plate locking system with 4 pressure cushions and 4 locking units on the movable plate. PV - adjustment of the injection unit. MC 5 - PC - (Pentium) control system with TFT colour monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with HPS-AT screw diameter 150 mm TECHNICAL DATA Clamping unit - mould clamping force: kN 20000 - mould opening force: kN 1400 - Dimensions of the mounting plate (H x V): mm 2650 x 2400 - Clearance between columns (H x V): mm 1870 x 1620 - mould opening stroke: mm 2800 - mould height (min-max.): mm 800 – 1700 - Opening width: mm 3600 - ejector stroke: mm 400 - ejector force: kN 400/200 Injection Unit - screw diameter: mm 150 Cetb ...

Key data: 2100 kN, 45 mm

Stock No.: 502923 Manufacturer: BATTENFELD Type: TM 2100-750+350V Control: UNILOG B4 Year of construction: 2003 Clamping force: 2100 kN Holm h x w: 570 x 570 mm Plate size h x w: 840 x 840 mm Min. installation height: 350 mm Max. installation height: 700 mm Plate spacing max.: 1230 mm Aperture travel: 530 mm Screw diameter: 45 mm Displacement: 358 ccm Spray pressure: 2116 bar Equipment 8x temperature control unit for hot runner On-screen text German CEE socket 16A Core pull hydraulic 1x Core hoist hydraulic 3x Air valve 1x Machine with water battery Machine without material hopper Spring-loaded valve gate nozzle Levelling elements EUROMAP 12 interface EUROMAP 13 interface Schuko socket 10A Two-Component Injection Molding Machine Machine dimensions LxWxH: 5.7m x 1.5m x 3.97m Total Weight: 13900KG

Used Injection Molding Machine Husky GL 300 P100 110 E120 Maximum shot weight 3 344 gm Maximum throughput 660 kg h Includes PET Resin dryer and hopper take out robot 3 stage no dehumidifier This machine includes a 8 5gm 30 25 preform mold Machine was in production until end February 2020 [...for more information send your inquiry to the seller.] refno: PR09

Used Smiform SR12 Blow Molding Machine 2003 SMIFORM SR 12 CAVITY Constructed in 2003 but totally overhauled in 2018 and used very little It is in excellent condition Preform loader and tipper included Air conveyors included It does NOT come with a compressor [...for more information send your inquiry to the seller.] refno: SO91

Used Blow Molding Machine Sidel 1992 Manufacturer SIDEL Model SBO2 Year 1992 Speed b h 3000 Processed formats 0 25ml 2 liter Accident prevention protections Yes Manuals available Yes Revisions available Yes Operating status In production Number of cavities 2 Preform neck type Preform 1881 weight 9000kg Quick format change Yes Preform loader Yes Preform orientator Yes Compressor No Chiller No Air recovery system No PLC type Mitsubishi Spare parts available Yes Hours worked 2000 Consumption Volt 360 Kw 40 Hz 100 Notes Machine working stabile suitable to be connect with filler machine The machine has been completely updated hmi electronics and new plc [...for more information send your inquiry to the seller.] refno: SO96

Used Blow Molding Machine Kosme 2003 No of cavities 4 Preform loader YES Preforms tipper YES Preforms unscrambler NO Compressor NO Air Recovery System NO Type KSB 4 year 2003 Linear or Rotary LINEAR Capacity 2 0 l 3000 bph 1 5l 3500 bph 1 0 4000 bph 0 33 0 5l 4500 bph In working condition Without molds Available midle of august 2022 neck 1881 and 1810 have manuals available [...for more information send your inquiry to the seller.] refno: SO97

Type Injection Moulding Machine Category Plastic Processing Brand Ferromatik Year 1999 Condition Used Location Switzerland Machine Specifications Controller NA Clamping Force 110 Ton Screw Dia. 40 mm Machine Description This Ferromatik Milacron K110 S D0gzkm Injection pressure 2240 bar Distance between tie bar 470 x 470 mm Closing force 1100 kN injection molding machine was manufactured in 1999. Production hours 24'456. Mold opening stroke 550 mm Screw diameter 40 mm. Weight of the machine 5'500 kg

PET Blow molding machine SIDEL SBO 18 Manufacturer: SIDEL Model: SBO 18 Manufactured in: 2001 Capacity: 26.500 bph Working hours: approx. 44.000 hours The machine was uploaded with a new program in 2006 and its output upgraded to 26,500 bph. The machine includes preform tippers for 2 Octabins each. Preform vertical conveyor up to the entry into the machine.

Injection molding machine Engel ES 1350/250 HL ST with dryer

Key data: 2200 kN, 40 mm

Injection moulding machine ENGEL VICTORY VC 650-150 Tech Stock No.: 503440 Manufacturer: ENGEL Type: VC 650-150 Tech Control: CC100 Year of construction: 2005 Hours: 92467 h We are pleased to introduce you to our used ENGEL VICTORY VC 650-150 Tech injection moulding machine. This high-quality machine has a 40mm screw and a clamping force of 1500 kN. Perfect for precision injection molding in a wide range of applications. Please note the increased minimum installation height of 395mm. Technical Data Closing Page Clamping force: 1500 kN Panel size h x v: 750 x 750 mm Min. installation height: 395 mm Plate spacing max.: 995 mm Aperture travel: 600 mm Ejector stroke: 150 mm Ejection force: 61 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 1800 kg Technical Data Spray Side Screw diameter: 40 mm Displacement: 251 ccm Injection ...

Key data: 2000 kN

Wittmann Battenfeld VM 200/1000 R1755 / Vertical injection moulding machine with rotary table / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 55 mm Spraying weight: approx. 570 g Spray pressure: 1666 bar Dosing volume: 594 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 620x570 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touchscreen Additional equipment: Vertical Injection Molding Machine with Rotary Table Operating hours: approx. 18,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Core Pull Control Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1755 mm Infrared Protective Curtains The machine was serviced by the authorized service Wittmann Battenfeld Aluminium platform with st ...

Key data: 62 kN

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of construction: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touchscreen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air Valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor, which is controlled by an inverter – very precise Automatic part feeding with quality control system Machine workstation protection with safety package Metrics: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...

Key data: 350 kN

Arburg OK-C S350-60 / Vertical injection moulding machine with sliding table / Very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 0x0 mm Size of clamping plates: 295x395 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical Injection Molding Machine with Sliding Table 3 stations on the sliding table Air Valve x 4 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Parallel Movements Infrared Protective Curtains It is possible to change the screw diameter Metrics: Weight: 2500 kg Length/Width/Height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before they are sold. ...

Key data: 400 kN

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of construction: 2012 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Injection pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tie-Bars Euromap 67 Robot Interface Air valve x 3 Hydraulic core pull x 3 Hot runner control x 12 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine was regularly serviced by Arburg's authorised service Original Arburg tool crane Metrics: Weight: 6500 kg Length/Width/Height: 1.97x1.69x3.40 m  ...

Key data: 2000 kN

Arburg 520C 2000-350/150 / Production line with the Wittmann W731 robot Year of construction: 2008 Injection unit: Screw diameter: 40 mm Spray weight: 166 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 520x520 mm Size of clamping plates: 728x728 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2-Component Injection Molding Machine Very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve x 3 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the vertical injection unit – precise injection Parallel Movements Screw diameter in vertical injection unit: ⌀25 mm - 49 g/hp Robot Wittmann W731 Year of construction: 2008 5-axis robots: 3 axes ar ...

Injection Molding Machine Arburg Allrounder CENTEX 420 C 1000 - 350, 100 t (year 2003) stock number 00653 Clamping force 100 t Screw 45 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 230 ccm Control Selogica Core pullers - 2 Hotrunner zones - 12 Weight 3430 kg, L x W 4250 x 1640 mm year of made 2003 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

Description: Serial number: 28619, weight: 44,000 kg, Injection unit: Screw diameter 90 mm, metering stroke: 390 mm, screw speed 5-125 r/min, plasticizing flow: 80 g/s, injection flow: 442 g/s, max. stroke volume: 2,481 cm³, max. injection weight: 2,233 g, specific injection pressure: 1,300 bar, nozzle stroke: 600 mm, nozzle contact force: 150 kN, heating power: 56 kW, number of heating zones INC.nozzle 6, weight of injection unit: 11 t Clamping unit: Clamping force: 3,500 kN, clamping force: 3,850 kN, opening stroke: 700 mm, ejector force: 70 kN, ejector stroke: 240 mm, mold installation height max. 880 mm, min. 300 mm, ramp platen total size: 1,640 x 1,640 mm, tie bar diameter: 140 mm, weight of clamping unit: 33 t, oil filling: 580 l, Equipment: toggle lever equipment Note on condition: all peripherals possibly visible in the photo, such as robot arm, etc., are not included in the  ...

Description: Serial number: 46984, weight: 10,000 kg Clamping unit: Mold height min. 795 mm, max. 1,500 mm, opening stroke: 1,205 mm, piston diameter: 125 mm, rod diameter: 90 mm, number of cylinders: 1 Clamping force max. stroke: 1,200 mm, piston diameter: 600 mm, number of cylinders: 1, flow rate pumps 390 l/min, speed: 17 mm/s, ejector: stroke 250 mm, piston diameter: 85 mm, rod diameter: 63 mm, number of cylinders: 1 Equipment: Tie-bar-less Attention: the lot only includes the injection molding machine, other peripherals such as robot arm, etc., as shown in the photo, are not included in the lot, but including staircase platform INFO: Production must be stopped to remove the equipment, so it would be preferable to dismantle the system during the interruption in summer (end of July, beginning of August). Location: A-2435 Ebergassing Approx. Onsite Dimension. (l x w x h): 10,331 x 2 ...

Description: Serial number: 42169, Own weight: 7,000 kg Injection unit: Screw diameter: 80 mm, metering stroke: 310 mm, max. stroke volume: 1,558 cm³, screw speed: 183 rpm, standard screw length: 20 L/D, plasticizing capacity: 90 g/s, injection flow: 478 cm³/s, specific injection pressure: 1,400 bar, specific injection pressure increased: 1. 640 bar, nozzle stroke: 650 mm, nozzle pressing force: 110 kN, heating power: 34 kW, number of heating zones including nozzle: 5, pump drive power: 55 kW, oil filling main tank: 1,000 l, oil filling suction tank: 850 l, weight of injection unit: 7 t Clamping unit: Clamping force 6,000 kN, opening force: 300 kN, moving cylinder force: 150 kN, opening stroke: 1,200 mm, mold installation height min. 800 mm, platen distance max. 2,000 mm, platen size HOR.X.WERT. 1,580 x 1,300 mm, ejector stroke: 250 mm, ejector force: 110 kN, weight of clamping unit: 4 ...

Description: Injection unit: Screw diameter: 50 mm Shot weight: 343 G Stroke volume: 377 CCM cm³ Injection pressure: 1892 bar Plastification rate: 35 G/S Screw speed: 255 1/min Closing unit: Closing force: 1500 KN max. opening daylight: 1000 mm Bar spacing: 500 X 500 mm min. molding height: 400 mm Tool mounting platens: 780 X 790 mm Approx. Onsite Dimension. (l x w x h): 4,600 x 1,700 x 2,200 mm, weight approx.: 6,500 kg

Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

Technical data: 2 stations wind moulding machine, extrusion PE 90 mm, 50 points Moog Programmer, control Geforn 186-th wind volumes max. 5,000 cubic centimetres