molding line for used for sale

Turning radius: 2.277 m, Travel speed with/without load: 18/19 km/h, Maximum gradeability: 26 %, Engine manufacturer: Mazda, Engine type: M 4-20 G, Engine power: 33 kW (no registration number) Auction-ID: A1-40136-305

Extra options: LED lighting front and rear, Blue spot, Spoon adjuster, electric handbrake, Auction-ID: A1-43890-5

Equipped with: 220v battery charger, triple mast, 3 wheels, free lift Auction-ID: A1-40136-255

Forks 1400mm, spoon board with welding pull 1100mm, triplex mast, free lift, side shift, towing eye with pin 25mm, work lighting, max lifting height 4500mm, max lifting capacity 2000kg Auction-ID: A1-40136-82

Air conditioner, ABS, ASR, reversing camera, MP3,tire size for axle 1: 215/65 R16C, tire size for axle 2: 215/65 R16C; length: 5.98 m, width 2.06m, height 2.55m; The copy of registration documents is attached. Auction-ID: A1-45911-17

Engine problem (see video) - bodywork looks neat, interior signs of wear (see photos) - sold without contents in cargo space Auction-ID: A3-43369-10626

Extra options : Battery 2022 , Blue spot , Electric handbrake , Rotating beacon , Joystick , Front lighting Auction-ID: A1-43890-33

Extra options: LED lighting front and rear, electric handbrake, joy stick Auction-ID: A1-43890-31

Equipped with safety grille Pin diameter: 50 mm Inner suspension dimensions: 975 mm Working width: 4,230 mm Hydraulically folding side panels: approx. 800 mm per side Auction-ID: A1-40136-288

Forklift from coating factory, technical condition good Auction-ID: A1-41964-327

Rotator fork positioner 2030mm staggered 1200mm forks Auction-ID: A1-41964-97

Equipped with 3rd and 4th function; hydrostatic; particulate filter; see-through mast; Spotlight Auction-ID: A1-40136-71

Extra options : Spoon adjuster , All-round lighting , recently inspected , radio , ventilation , closed cabin , Deutz engine Auction-ID: A1-43890-10

Internal number 845 Auction-ID: A1-46329-12

\" WINI Desk / Work Table \"Form 2000\" – 160 x 80 cm – with permanently installed undermount cabinet Equipment: • Sturdy steel frame • Permanently mounted undermount cabinet with several drawers Condition: Used, with signs of wear and tear due to age and use (slight scratches, discoloration). Scope of delivery: • Desk incl. permanently installed undermount cabinet • Sale without pictured contents / tools / decoration • Dimensions: approx. 160 x 80 x 72.5 cm • Manufacturer: WINI Office Furniture • Model: Form 2000 • Colour: light grey table top, grey frame, beige undermount cabinet \" Auction-ID: A7-46417-306

Tilting container ENITOR type K500 Used tipping container made of galvanized steel, suitable for chips, scrap and other bulk materials. Type: K500 Load capacity: 800 kg Content: 500 l Year of construction: 2017 Weight: 150 kg The container is rollable (4 wheels), has a tilting device and is fully functional. Optical traces of use due to previous industrial use present. Dimensions: approx. 110 × 110 × 104 cm (L×W×H). Auction-ID: A7-46417-2

Covidieb ValleyLab Force Triad Software Version: 4.00 Incl.: - Bipolar footswitch - Monopolar footswitch - LigaSure Footswitch - Bipolar tweezers with connection cable - Monopolar handle - Neutral electrode connection cable Auction-ID: A7-46412-9

Industrial control terminals with closed housing for fixed wall mounting. Suitable as an HMI display, machine control panel or visualization terminal in production and workshop environments. Front with glass cover, robust industrial housing. Technical data (resolution, interfaces, touch function) not known. Auction-ID: A7-46417-201

Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-45902-223

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-315

diesel power generator Brand: Ford power: 8,125 kVA Engine: 498 cc diesel engine Starting: Electric starter motor Sockets: 1 x 400 volts (CEE 3P+N+E) 1 x 230 volt (CEE 2P+E) 1 x 230 volts (CEE 7/3 – Schuko) Protection: circuit breaker and emergency stop Housing: Soundproofing housing Display: LED Display Keys: 2 keys Weight: 165 kg Degree of protection: IP44 Condition: unused, in the original packaging Auction-ID: A3-43519-523

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-317

Condition: Used – fully operational, excellent overall condition Power: 120 kW Engine: Diesel, 1,968 cm³ Drive: 2WD Seats: 2 Max. permissible weight: 3,500 kg Max. speed: 150 km/h Mileage: Approx. 298,400 km Registration: Full documentation available (currently registered in Croatia) Note: Engine warning light is on Auction-ID: A7-46408-7

Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-45902-226

Internal number 837 Auction-ID: A1-46329-13

Tilting container ENITOR type K500 Used tipping container made of galvanized steel, suitable for chips, scrap and other bulk materials. Type: K500 Load capacity: 800 kg Content: 500 l Year of construction: 2017 Weight: 150 kg The container is rollable (4 wheels), has a tilting device and is fully functional. Optical traces of use due to previous industrial use present. Dimensions: approx. 110 × 110 × 104 cm (L×W×H). Auction-ID: A7-46417-5

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-405

LOT 9 Type: Forklift truck Brand: Linde Model: H80D Serial number: E1X353K00231 Year: 1999 Fuel type: Diesel Operating hours: 7720 h Own weight: 12610 kg Lifting capacity: 8000 kg Mast type: Duplex Tire type: Solid rubber Dimensions: Fork length: 1400 mm; Fork width: 1900 mm; Lifting height: 5700 mm; Overall length: 3400 mm; Overall height: 3900 mm Additional information: Diesel: yes. Auction-ID: A7-46289-9

General data: Engine: 1.8 TDCi Mileage: 284000 km Condition: Non-running (engine does not start) Auction-ID: A7-40553-29

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-314

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-404

Internal number 823 Auction-ID: A1-46329-14

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-316

Type: Forging Pliers / Hardening Tools / Thermal Protection Name: Hardening Shop Lot Forging Pliers, Thermal Protection & Melting Shells – 25 Pieces Description: Lot from the dismantling of an industrial hardening shop. Included are forging pliers of different designs and lengths for gripping and moving hot workpieces, as well as heat-protective clothing for work on heat treatment plants, and refractory melting or casting shells. The components are intended for use in forging, hardening and heat treatment plants. Sale exclusively as a complete lot. Condition: • Used Scope of delivery: • Forging pliers, various designs and lengths• Thermal protection (heat protective clothing / apron / coat) • Melting or casting shells (fireproof) • Total scope: 25 parts• Delivery as shown • Sale as complete lot • Material pliers: steel • Pliers types: forging pliers / gripping p ...

nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft

impact energy:207951 mkg ram hammer stroke:660 mm no. of strokes:100 /min impact energy:2040 kJ distance lower die block / ram gudeway:660 mm Throat:750 mm steel forging - rectangular up to:240 mm steel forging - diameter up to:270 mm power requirement:75,0 kW weight of hammer:16,5 t weight of anvil:15,5 t ram hammer weight:750 kg weight:32,0 t dimensions (WxDxH):3,2 x 1,45 x 3,45 m Mode of operation:pneumatisch

Dough divider / dough strand former RHEON, type: Twin Divider VX 212 with large hopper bmTEC - Large dough funnel from bmTEC - Weight range: 75 - 1,200g (depending on the type of dough) - Capacity: up to 800 kg - Width of dough sheet: 130mm - Single or double row production - Very gentle work on dough - Large selection of grammages can be stored - Quick product changeover possible - for products: bread, rolls, baguettes, focaccia and other types of bread - Weight range: 75 - 1,200g - El. Connection: 380 V, 50 Hz, 1.847 kW, 7.17 A The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010

An entire line for sale

STRIP THICKNESS: 0.5-5 MM, SHHET LENGTH: 2 - 4 M,

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

RAIL LENGTH: 5 - 60 M, CONTINUOUS MEASURING, 6 LASER MEASURING HEADS, SPEED: 1 M/SEC., MODERNISED IN 1992

Liners Wear less than 0.05