mod 72 used for sale

; Gross weight [kg]: 5000; Engine: DC09 72A/02-11; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 1200

pressure: 30 t stroke: 400 mm daylight longitudinal/sideways: 720 x 295 mm dayligth: 900 mm liter capacity: 6,0 l feed down: 7,5 mm/sec feed up: 12,5 mm/sec Motor output: 3,0 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,35 x 0,85 x 2,2 m High-quality, hydraulic press can be used either by hand or by motor operate. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking 2 year guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

Key data: 3500 mm, 810 , 60

Screw diameter: 60 mm Injection weight in polystyrene: 810 g Clamping force: 3500 kN Screw diameter: 60 mm Stroke volume: 891 cm³ Injection weight in polystyrene: 810 g/hp Injection pressure: 2,420 bar Clamping force: 350 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 350 mm Opening distance: 730 mm Microprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kW Total connected load: 78.1 kW Total weight: 17,300 kg Total size: 7.4 x 2.0 x 2.4 m Payment terms: 100 % before taking over the machine, net only

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

; Gross weight [kg]: 1836

Mayr EAS overload clutch with sprocket 12 B1 Z 23 Bore ø 30 Height 64 No. 2/490.720.0SX0911968 160-400 Nm

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...

Manufacturer GEMINI Model GHT4-720 x 2,000 Year 2002 FAGOR 8055 CNC Capabilities Max. Ø turning on bed / carriage 720/470 mm. Height of points on flat guide 366 mm. Distance between points 2,000 mm. Fast Forward X/Z Axes 8 m/min Head Nose Head DIN-55027-11 Main shaft hole diameter 104 mm. Head Revolutions 0-1600 No. of Automatic Head Ranges 2 Main Motor Power 17/ 20.5 kW. Maximum torque 1590/1920 Nm Counterpoint Tailstock shank diameter 100 mm Tailstock shaft course 200 mm Morse 6 Tailstock Rod Housing Equipment 4 Post-Automatic Turret. Full Rear Protection INCLUDED Universal 3 Claws Plate INCLUDED Fixed bezel Cap. 50/220 INCLUDED Maximum permissible weights Max. piece weight between points 2,560 kg With 1 bezel / With 2 bezels 3,200/4,000 kg Rim-in with center of gravity at 250 mm. 800 kg Others Total power 28 kW Machine weight 4,900 kg. Machine Di ...

Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2013 condition: good (used) Conveying length in mm: 3350 Nominal / outside width in mm: 720 Belt width in mm: 620 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: including supports and side guides For indivi ...

Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm -Weight: 6.3 kg

MADO MEW 725 automatic grinder, including lifting device, two feeding worms, one working worm, cutting set Unger 5 pcs., including key for the removal of the working worm

Transnorm Rising falling Incline with arch belt conveyor GF 7200+700-700-600 RA2201 Technical data: Conveyor length (NL): 7900 mm ( 7200 mm incline + 700 mm arch ) frame width (NB): 700 mm, 8000 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7900 ( 7200 + 700 ) Nominal / outside width in ...

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve - Manufacturer: Valpres -Type: 72000007 -Size: DN32 PN40 -Price: per piece -Number: 3 piece -Dimensions: 155/250/50 mm -Weight: 4.3 kg/piece

x-travel: 725 mm y-travel: 525 mm z-travel: 505 mm table-size: 1000 x 500 mm table load capacity: 500 kp spindle taper ISO: 40 quill stroke: 80 mm spindle turning speed range: 25 - 5000 U/min voltage: 400 V tool changer made by:: Kelch 20-fach CNC-control: PHILIPS 3460 power capacity - milling spindle: 10 kW total power requirement: 18 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 2,60 x 3,80 x 2,35 m Rigid machine for heavy machining. Machine was last time under power 8 years ago. Machine parameters must be reloaded to RAM. Machine is sold as it is (not working), no guarantee. For spare part use or reconditioning / retrofit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

Messer HSS für Papierschneider / paper knife HSS - guillotine Ideal 7228 / 7260 (Krug & Priester) Art.: PS4409 Ersatzteil Nr. / parts No. 9000141 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 840x100x10 mm. Number of holes M10: 6 Number of rows of holes: 2 Packaging : Disposable crate

Inv. Num. : 7298 In good technical condition.

Workbench, work table, assembly bench -with: bench vice and 2 side tables -Workbench: 2045/720 mm, total height: 1100 mm -Vice: 380/150/H140 mm -Jaws: 115 x 20 mm, clamping width: 185 mm -Side tables: 500/500/H860 mm -Weight: 164 kg

Gearboxes, stin gearboxes, angular gearboxes, transmission gearboxes, crane gearboxes -Ratio: 16.29: 1 -Hollow shaft: Ø 80 x 310 mm -Hole circle: Ø 300/ M16 -Price: per piece -Number: 2 pieces -Dimensions: 700/540/H405 mm -Weight: 282 kg/piece

RAFFEL NH3 – 722 m² Brand:RAFFEL Type:NH3 – 722 m² Stock number:M23-2490 Cooling capacity:120 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:5100 x 2260 x 5060 mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 722 m2. Visit our website: used-refrigeration

Qty. 1 Second-hand Labeling machine Mfc.: KRONES A.G. Type: Universella 723 - 0.25, 0.5, 0.7 L Built: 1993 Labeling without positioning or with side positioning. Carousel type 15 pcs. plates Gluing: label, counter label, large and small "L" type band. Several sizes of palettes. Multi-row plate conveyors feeding into and out of the labelling machine. Technical assessment: complete device, technically efficient.

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

Lippert rising falling Incline belt conveyor GF 720+11450+850-750-600 RA2263 Technical data: Conveyor length (NL): 13020 mm ( 850 mm forerun + 11450 mm ascending belt + 720 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 13020 ( 850 + 11450 + 720 ) Nominal / outside width in mm: 750 Belt w ...

Used labelling machine by Krones A. G. Herman Kronseder type Universella 723-931, new 1993. Specification: - number of discs: 15, - number of pallets in the aggregate: 8, - number of grippers in the cylinder: 6, - bander: large and small, - capacity 18,000 bottles/h, - several bottle formats, - side positioning of bottles.

Key data: 3200 , 700 , 60

Screw diameter; 60 mm Injectable volume: 792cm3 Injection pressure: 2500 bar Column width: 720 x 720 mm Minimum mould thickness: 300 mm max: 700 mm Aperture stroke: 700 mm Cores: 3 Robot Interface: YES Options with ARBURG robot

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: 720 Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: YES For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement ...

Rack trolleys, paint drying trolleys, compartment trolleys, transport trolleys, shelf trolleys -Total length: 1190 mm -Total depth: 720 mm -Total height: 1800 mm -Weight: 66 kg

1. Agilent 720 ICP, MOF 2014. In very good working condition. Complete set with all necessary accessories like the chiller, Pump and computer software.

Clamping plate, welding table, welding table, straightening plate, straightening table -Width: 1000 mm -Length: 720 mm -Height: 200 mm -with supporting ribs -Plate thickness: mm -Weight: 486 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Output: Even speed 1420 rpm -Diameter shaft: Ø 18 mm -Output: Angle speed 32 rpm -Diameter shaft: Ø 32 mm -Power: 1.5 kW -Construction: B5 -Protection class: IP 44 -Dimensions: 620/260/H350 mm -Weight: 51 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.47 kW -Speed: 3,000 rpm -with stand -Max. grinding wheels: Ø 200 x 25 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/540/H1100 mm -Weight: 68 kg

Transport trolley with 2 trays -Stainless steel tub dimensions: 600/400/H220 mm -Design: stable -Dimensions: 540/725/H800 mm -Weight: 30 kg

Distribution belt / Deserting system For splitting a shingle stream into two processing lines Condition: overhauled, serviced, fully functional, ready for use

Adjustable traverse, crane traverse, indoor crane, crane hook traverse, load traverse, heavy-duty traverse -Crane traverse: heavy-duty traverse -Carrier: IPB 550 / HEB 550 -Dimensions: see photo technical drawing -Transport dimensions: 7220/920/H1015 mm -Own weight: 2100 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: drawer cabinet, stable design -13 drawers: Distribution/height see photos - lockable: without lock -Dimensions: WTH 720/710/H1050 mm -Weight: 201 kg

High-speed labeller for 2.25 ml Ypsomate Autoinjectors. The machine line consists of an automatic pallet management system for the autoinjectors packed on pallets in trays: a) Integrated Full Tray De-Palletizing with a first FANUC robot, which places the trays on a conveyor belt. On the same machine, the empty pallets are palletized with empty trays by a second FANUC robot. b) Machine where via the conveyor belt, trays transported with autoinjectors arrive at the next FANUC robot. This robot will pick up the autoinjectors in the laying position from the trays and put them upright into the feeder to machine c). The emptied trays will be transported back to machine a), where they will be picked up and put onto an empty pallet. c) Fully autom. rotary labelling machine IMA, type Sensitive Roto 720. Machine with two label dispensers for faster reel change (no downtime). Outp ...

S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

Pappschere / Board Cutter Krause 140/72cm Schnittlänge / Cutting Length 140cm Tischbreite / Table width 72cm Auffang- tisch, Fußpressung Vorderan- schlag mit Schmalschneider vordere Anlegeleiste mit darauf verschiebbarem Anlege- winkel Maßskalen in mm-Teilung Gewicht/ Weight 420 kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 72er Year 1998 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid version, with drawer and vice -Workbench: 2000/720/ H940 mm -Vise: 460/160/H175 mm -Clamping jaws: 150 x 25 mm, clamping width: 195 mm -Total weight: 122 kg

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: plastic strapping band 2 rolls -Type: HM 19-725-500 -Width: 19mm -Length: 500 m -Number: 2 rolls -Price/Delivery: complete -Box dimensions: 310/300/H310 mm -Total weight: 12.8 kg

-type: HF 727075 -Shaft: Ø 16 mm, height of shaft axis 70 mm -Base plate: hole spacing 165/150 mm / M16 -Number: 8x bearing block available -Price: per piece -Dimensions: 210/200/H100 mm -Weight: 5.2 kg/piece

-type: HF 727091 -Shaft: Ø 25 mm, height of shaft axis 80 mm -Base plate: hole spacing 180/180 mm / M20 -Quantity: 1x bearing block available -Dimensions: 250/230/H115 mm -Weight: 8.8 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 72, see photos -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photos -Weight: 26 kg