mod 72 used for sale

Key data: 900 mm, 720 mm, 1160 mm

Drawer tool cabinet -Tiroclass 8 drawers height 95 mm Dimensions (L x W x H): 900 x 720 x 1160 mm Weight: approx 100 kg

A treatment chair Ritter for a dental facility is available. Components: patient chair, dentist’s unit, assistant’s unit, operating lamp, spittoon, and ultrasonic scaler. The electronics have a problem. An on-site inspection is possible.

Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 90 °, 3000 mm

SPECIFICATIONS: Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45° Stop with retractable system Digital measurement for height - inclination - stop width Pitching power: 0.75 kW Sawing power: 5.5 kW EQUIPMENT: Miscellaneous Accessories Angle cutting device 0° - 90°

Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: LINEMATIC Model: LM34/725 Year of Manufacture: 2005 Power Requirement : 17 kW Voltage (VOLTS): 400 V Current (AMPS): 24 A Frequency (FREQ): 50 Hz Phase (PHASE): 3P + N + PE (Three-phase with Neutral and Protective Earth) CE marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 3200 kN, 359 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.

Lippert belt conveyor riser with arch GF 7285-550-400 RA1622 Technical data: Conveying length (NL): 7285 mm (riser 4000 mm + bow 2285 mm) Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 7285 ( 4000 + 3285 ) Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor sp ...

With new 800mm. wide belt and new control-unit.

General SKU324U775 MakeJentec GmbH LocationBarneveld CEcheck Type720 &: 100 Ltr. (2x) Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume720 Ltr. Motor15 KW Specified Features - Processing vessel Closed stirring vesselcheck CapacityA: 600 Ltr. (max. 720 Ltr.), B&:C: 70 Ltr. (max. 100 Ltr.) Vessel sizesA: dia. 1200x833, B&:C: dia. 638x569 mm With covercheck Top connectionsDN25, DN50 With jacketA: 150 Ltr., B&:C: 40 Ltr. Max. temperatureA, B, C: max. 0-140 °C With paddle stirrer(A&:C) With turbo stirrer(B) MotorA: 1,5 kW 220-240/380-415 Volt (Ex): B&:C: 3 kW 380-415/660-720 Volt (Ex) Speed mixing shaftA: max. 56 rpm, B: max. 1410 rpm, C: max. 98 rpm With homogeniser(A) Motor15 kW 380-415/660-720 Volt (Ex): max. 1455 rpm MaterialStainless steel 1.4404 With ja ...

Transnorm conveyor belt GF 7200-600-500 RA2448 Technical data: Conveyor length (NL): 7200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...

A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible.

Langguth Deckler+Labeller sysLAN 720+selfLAN 510 Automatic capping and adhesive labeling in one machine Very good condition, straight from production

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

Film Processor G+J ML 720; Condition revised; Working width 720mm; with daylight cassette (one roller is missing). Film processor G+J ML 720; condition refurbished; working width 720mm; with daylight cassette (one roller missing).

This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine.

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.

This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine.

General SKU202X014 Make3M TypeLigaster 720 V400 Mach.No.27345 Year of construction2011 Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume400 Ltr. Surface0.3 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0.3 m2 Capacity400 l Vessel sizesDia. 650 mm x 1300 mm Top connectionscheck Liquid outletDN25 Max. temperature120°C MaterialStainless steel 1.4435 (316L) General Mounted on framecheck LocationBarneveld Mounted on wheelscheck Floorspace1,30x1,40 m Total height2,50 m CEcheckGeneric medicinesFine chemicalsOther chemicalBiotechnologyAgrochemicalsOther pharmaceuticsCosmeticsNutsche filtersBiopharmaceuticalAPI3MIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries ...

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

RICOH Pro C 7200 X (Heidelberg Versafire EV) year 2019 4 colours + 1 colour white and clear colour total approx. 8.5 million Banner max. format 700 x 330 mm vacuum feeder Finisher controller EFi Fiery E-46 a in production good condition

B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC

B&A REF: 9289 TON: 320 SCREW DIAMETER: 60-35-30MM SHOT WEIGHT: 607H / 132P / 97S STROKE VOLUME: 644 / 144 / 106CM3 INJECTION PRESSURE: 2000 / 2000 / 2500 AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 700MM MOULD OPENING STROKE: 700MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOCIA TOUCH CORE PULLING: 3 AIR VALVES: 2 MOTOR: SERVO HEATING CAPACITY: 22 + 7.7 + 7.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: MULTILFT SELECT 15KG QUER SCREW DRIVE: ELECTRIC HOT RUNNER: 18 ZONE ACCYMULAQTED: 6

Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device -Load capacity: 100 kg -Lifting height: 725 mm -Platform: 545 x 285 mm, tiltable -Dimension: 400/380 / H1260 mm -Weight: 205 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a Fluri milling machine type 14SE -Width: 720 mm -Length: 1200 mm -Height: 235 mm -Plate thickness: mm -Plate: Solid -Groove width: mm -Dimensions: 770/1200/H235 mm -Weight: 906 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Conveyor belt: Belt conveyor -Speed: 23.45 m/min -Drive: SEW-Eurodrive 0.25 kW, see photo of nameplate -Belt width: 815 mm -Conveyor length: 7200 mm -Quantity: 4 pieces available -Price: per piece -Transport dimensions: 7255/1050/H270 mm -Weight: 202 kg/unit

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency-controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Brake: 10 Nm -Belt width: 600 mm -Conveyor length: approx. 7290 mm / approx. 780 mm height adjustable -Installation dimensions: 7290/860/H340 mm -Transport dimensions: 4230/860/H570 mm -Total weight: 358 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums -Manufacturer: Nilfisk, Industrial vacuum cleaner type GB 726 -Connection: 380-415 V 50 Hz -Power: 1.9 kW -Number: 3x industrial vacuum cleaners available -Price: per piece -Dimensions: 820/600/H1150 mm -Weight: 87 kg/unit

Flat gear motor, gearbox, spur gear, angle gear, worm gear, Movigear, flat gear, flat gear -Gearbox: Parallel shaft gear box, without type designation SEW EURODRIVE Parallel shaft gear motor series F..DR.. -Drive: without electric motor -Part No.: 06420249/03M17 GH 3 250613 -Translation: i= 38 -Hollow shaft: Ø 90 mm -Recess for motor: Ø 250 mm -Bolt circle for engine: Ø 300 mm -Dimensions: 720/350/460 mm -Weight: 226 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Klump, Conveyor belt type IK 2133 unused -Width: 140 mm -Length: 7260 mm -Thickness: mm -Quantity: 1 conveyor belt available -Dimensions: 280/250/H140 mm -Weight: 2.2 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 6 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Dimensions: W 720/480/H 1000 mm -Weight: 102 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 6 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Dimensions: W 720/470/H 1000 mm -Weight: 84 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 5 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Dimensions: W 725/480/H 1000 mm -Weight: 98 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 6 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Number: 2x drawer cabinet available -Price: per piece -Dimensions: W 720/480/H 1200 mm -Weight: 106 kg/piece

Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators  Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine

Electric Drum Screen Machine Drum length 7000 mm, diameter 2000 mm Drive 22 kW incl. control cabinet incl. cleaning brushes Screen perforation and colour according to customer requirements ROBUST CONSTRUCTION ! Optional: Vibratory feed conveyor

Machine was never installed in the system. Was to be explained in Brauschule. Very good condition like new

- 2 x charging batteries with charger - 1 X electr. Closing - Welding Machine - Operating instructions - Normal traces of use - works without problems - Mobile, flexible, easy to pallet - No bending, back-friendly

Laser engraving machine manufactured in 2021. This VIDEOJET 7230 features a wavelength of 1064 nm and operates on a voltage range of 100 - 240 V. It includes essential components such as a laser head, laser source, and a touchscreen control panel. If you are looking to get high-quality laser engraving capabilities, consider the VIDEOJET 7230 machine we have for sale. Contact us for further details.

Vacuum Suction Cups Manufacturer Nilfisk Type GB 726 Year of construction unknown Ready to use good condition Power 1900 W

Laser engraving machine manufactured in 2018. This VIDEOJET VJ 7230 features a laser wavelength of 1064 nm and operates on a voltage range of 100 – 240 V. It includes an external touchscreen interface housed in stainless steel and comes with a Bofa Ad Oracle extraction system. If you are looking to get high-quality engraving capabilities, consider the VIDEOJET VJ 7230 machine we have for sale. Contact us for further details.

Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed p ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR853 robot Year of Make: 2015 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR853 Year of Make: 2016 6-axis robot: 5 axes are driven by servo motors (electric) ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4-axis  ...

General SKUR0915 MakeTechnoglass (vessel) / Tycon (top part) (Ita) LocationBarneveld Type5445 ltr Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume7260 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7260 ltr Vessel sizesdia. 1800x3190mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connectionsDN150 (5x) DN250 (2x) Outletdia. 100mm With jacket710 ltr Max. temperature-30/200 Degr.C With paddle stirrercheck Motor15 kW 380 Volt (Ex) With jacketcheck Glass Reactors MaterialGlass - Enamel General No.5745 / 2705 Year of constructionvessel part 1996/ top part 1985 Floorspace2,3x2,3 M Total height5,9 M Weight9000 Kg ATEX designedcheck Extra SpecificationsClamped topGeneric medicinesOintmentsFine chemicalsOther chemicalBi ...