mobile cran used for sale

SOLD New Wartsila 20V34SG Crankshaft For Sale Unused Also suitable for Wartsila W20V32 engines 2 units in stock In New unused condition, from a surplus engines Other engine and power plant equipment available.

weight max. in kg: 10000 kg weight: 10 kg dimensions: 700 x 300 x 300 mm with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coming from Mecalac 8MCR year 201; S50 S connection; Auction-ID: A1-40135-262

Key data: 1500 mm, 220 mm, 1700 mm

1 pc. used crankshafts & camshafts - cylindrical grinding machine Make BERCO Model LYNX 2000 Year of construction 2013 Specifications Max. grinding diameter for recirculating grinding 220 mm Max. grinding diameter for cylindrical grinding 300 mm Max. workpiece weight between the tips 150 kg Center height above table 270 mm Center width 1700 mm Max. sanding length 1300 mm Diameter of the chucks 180 mm Tailstock quill path 50 mm Max. grinding wheel diameter 660 mm Min./Max. Grinding Wheel Width 20/80 mm Max. circumferential speed 35/80 m/sec. Grinding spindle head (X-axis) Final drive with linear motor - travel 490 mm Measuring device optical scale resolution 0.0001 mm Workpiece head (C-axis) Workpiece spindle speed range 1 - 1000 rpm. Encoder Measurement Range - Resolution 0.0001 degrees Table (Z-axis) Final drive with linear motor Measuring device optica ...

TO WHOM IT MAY CONCERN ; WE VE USED IN STANDART SIZE CONDATITION OF CRANKSHAFT OF ULSTEIN BERGEN KVGB-16 AT OUR STOCK THE CRANKSHAFT JOURNALS ARE IN STD SIZE LIMITS. IF YOU VE ANY FURTHER QUESTIONS PLS DO NO HESITATE TO CONTACT WITH US . BYE THE WAY WE VE ALSO BELOW LISTED MAJOR PARTS OF KVGB-16 ENGINES CYLINDER HEADS / PISTONS/ CON RODS / FUEL PUMPS / EXH GAS TURBOCHARGERS / OIL PUMPS / FUEL FEED PUMPS / WATER PUMPS ETC ETC AT EX STOCK. IZMIR TURKEY Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Equipped with lifting bracket Auction-ID: A1-45866-82

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

Auction-ID: A1-45411-90

hydraulic outriggers for loader cranes Stroke 500 mm Stable design with guide via square tube Mechanically telescopic with bolt 300 mm - grid 100 mm Outer square tube 100 x 100 mm Folding device for support cylinder - can also be dismantled Outriggers can be folded down approx. 60° Retracted height 1,000 mm with folding device with integrated load holding valve Removable support plate - size 320 x 250 mm Weight 80 kg / piece - New - unused - 2 pieces in stock - unit price -

weight max.: 250 kg throat: 2.500 mm weight of the machine ca.: t height: 3000 mm Column-mounted slewing jib crane from DEMAG Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 250 kg : -275 mm : 780 mm : 4000 mm Total height: 5250 mm : 695 mm : 4485 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe with 4 tools only for 3-cylinder crank shaft

weight of the machine ca.:18 t centre distance:700 mm max. swing diameter:200 mm Lathe with 4 tools only for 3-cylinder crank shaft

weight of the machine ca.:18 t centre distance:700 mm max. swing diameter:200 mm Lathe with 4 tools only for 3-cylinder crank shaft

Crane scale with power supply and remote control Load capacity in kg 10000 kg Weight 10 kg Dimensions L x W x H 700 x 300 x 300 mm

arm length: 3500 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 38Hubwerk DemagAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5500 mm total column height: 3600 mm weight max. in kg: 2000 kg height: 4100 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m K9F 0902 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5500 mm total column height: 3200 mm weight max. in kg: 2000 kg height: 3900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m K9F 0902 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3 t clamping width: 3000 mm total power requirement: kW weight of the machine ca.: 0,110 t dimensions of the machine ca.: 3x0,3x0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lightweight crane Pagus hydraulic lifting capacity: 500 kg lifting height: max 2100 mm used, tested ! Dimensions: 1600 x 950 x 1670 mm Weight: 50 kg

Column crane DEMAG SSK - KBK I/I-V ( SSK-KBKI/I-V ) Bj: 2000 Lifting capacity: 80 kg Span width: 2400 mm Hook height: 2600 mm < br /> trolley DC-PRO 1 - 80 H5 V1 Year: 2005 Lifting speed: 4 / 7 m/min 380 V (motor housing slightly cracked) used, ! Dimensions: 3550 x 2600 x 900 mm Weight: approx. 370 kg

Overhead crane with trolley, overhead crane STAHL ZL-C 125-13,60 E built: 1989 Lifting capacity: 12,500 kg Crane track average: 13,600 mm Track average cat: 1,400 mm Crane travel: 40 / 10 m/min Trolley travel: 20 / 5 m/min Stroke: 5 / 0.8 m/min hook path: approx. 5.8 m with test book and documentation ! dismantled ! used, tested ! Dimensions: mm

Crane bridge drive, bearing system drive. Sentence. 4 pcs. CIMCORP SLAVEMBR400TP 2 thereof with antrib. SIEMENS / ALPHA 1FT6102-08AH71-4SH1 / TP 110X-MF2-25 -0k1-25 ( 1FT6102-08AH71-4SH1/TP110X-MF2-25-0k1 -25 ) all rolls with cleaning system CLEAN UNIT TSN-P041K Roll dimensions: Ø 350 mm x 110 mm Disc housing: 412251 used, tested ! Dimensions: 1200 x 800 x 500 mm

arm length: 3000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.27 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 2500 mm total column height: 3100 mmm weight max. in kg: 125 kg swivelling range: 180 Grad Electric 380 Volt: Hnad control: We have no documentation of this crane so we sell with a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column swaying crane, Demag / J.D. Neuhaus, 125kg with pneumatic chain hoist – used - : Price from location: 1.500.-€ (net)! Manufacturer: Demag Manufacturer chain hoist: J.D. Neuhaus Type: unknown or will be submitted later Year of manufacture: unknown or will be submitted later Payload: 125kg Height of the column and length of the boom must be submitted later Condition: good Available: from approx. Mid-January to mid-February 2ß25 Location: Munich. Later Frankenberg camp

ID3448 Demag 3160 – Challanger year/Baujahr 2012 6900 hours/hours, 118.000 km 50 m mast, crane completely overhauled 50 m mast, crane completely overhauled

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

arm length: 2-3 m total column height: 4,3 m weight max. in kg: 80 kg travel of hook: 4,3 m NEWNever usedOVP Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture 06/2024 - Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Mains connection 380 - 415 v Uc: 24 v The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crankshaft Jenbacher 420 Nr 327583 Delivery time about 6-8 weeks

incl. reel chassis HFW 1 and electric chain hoist EKZT 10-2

5t load capacity, track width 14,200 mm. Well preserved. Without warranty. Crane can be loaded on open truck freely.

Tiger Sick Hook Traverse TA-SN-SZV-25-36 Load Capacity 2500Kg - For information see pictures -On hand

3. Second-hand overhead crane For loading the slabs! Spam: 25 m Capacity: 5 tons Total weight: 32 500 kg

ID3552 Potain IGO50 year/Year of construction 2022 Outreach: 40 m, lifting capacity: 4,000 - 1,000 kg, hook height: 22 m, basic ballast: 2 x 2,820 kg, incl. radio remote control and auxiliary control panel, hoist: 15: LVF 10 Optima, trolley: 3 DVF 5, slewing gear: RVF 51 Optima+, rope shear: SM/DM, central lubrication: grease cartridges, incl. additional ballast 12 x 1,900 kg, incl. advertising board with company logo on the crane boom, incl. substructure timbers, incl. chain slings - 4 ctrl. Radius: 40 m, Lifting capacity: 4,000 - 1,000 kg, Hook height: 22 m, Base ballast: 2 x 2,820 kg, Incl. radio remote control and auxiliary control panel, Hoist: 15:LVF 10 Optima, Trolley mechanism: 3 DVF 5, Swivel unit: RVF 51 Optima+, Rope shear: SM/DM, Central lubrication: grease cartridges, incl. additional ballast 12 x 1,900 kg, incl. advertising board with company logo on the crane boom, inc ...

Key data: 3000 mm, 850 mm

Crankshaft Grinder BERCO RTM 425 Center height mm.425 Max swing mm.850 Center distance mm.3000 Wheel flanges Rests Machine dimensions mm.7100 x2350 Weight approx Kg 9000 Perfect working condition

Specifications will follow asap

Demag 5 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Demag Mannesmann 6,3 ton x 11 410 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 15 093 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 15 093 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 11 410 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Radiocontrol: no radio control Numbre of riggers : double rigger

E-chain hoist, electric hoist, crane GIS type 150 / FFabr. No: 1502802 Year of construction 1981Load capacity 1500 kgHook travel 4 metersMain lifting speed 4 m/min. Fine lifting speed 1 m/min.- Electric carriage with a speed for double T-beams- 2 load trainsGood condition; used

Electric Chain Hoist Crane DEMAG Type PK1N-FFabr. No. 5533406 Year of construction 1983Load capacity 125 kgHook travel 3.8 metersLifting speed 8 m/min. Fine lifting speed 2 m/min. Cable length operating bottle approx. 1.2 meters1 load string = 125 kgPower supply 380 volts, 50 HzWeight: 25 kggood condition; used

Year: ca. 1988 arm length: 2000 mm weight max. in kg: max. 1000 kg height of hook: max. 2000 mm WITHOUT LIFTING DEVICE: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63314301 Year of construction: 1992Load capacity 1000 kgHook travel 4.1 metersDistance suspension to load hook 480 mmMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length of operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz.2 load trains = 1000 kg- emergency stopWeight 43 kggood condition; used

arm length: 2.200 mm height of hook: 2.600 mm weight of the machine ca.: 1,8 t weight max. in kg: 1000 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. ED 24ST Series No. 00005266 Year of construction 2008Load capacity 240 kgHook travel 2.7 metersDistance suspension to load hook 950 mmLifting speed Lifting speed: 3 to 12.9 m/min. Mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety, stroke limit switch- emergency stopWeight 18.5 kgvery good condition; used