mobile cran used for sale

Description: Track length: approx. 25 metres for sheet length 6000 mm System can be tilted 180 degrees 14 suction cups Crane control: wired control, With rail: Yes, Self-running: Yes, Pulling height max.: 4 m, Vehicle identification number: GB-110623-P, maximum capacity: 80 kg, gauge width: 12,000 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Description: Track length: approx. 25 metres for sheet length 6000 mm 7 suction cups Crane control: wired control, With rail: Yes, Self-running: Yes, Pulling height max.: 4 m, Vehicle identification number: BG-110620-U, maximum capacity: 80 kg, gauge width: 12,000 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Description: Demag hoist distance: 8,600 mm, Hoist: electric wire rope hoist, Crane control: wired control, With rail: No, Self-running: Yes, Pulling height max.: 4,401 m, Vehicle identification number: 1,546, maximum capacity: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 3,000 x 1,000 mm, weight approx.: 5,000 kg

Overhead crane : 5 TN, length: 9.2 m, brand: Azpeitia Hermanos. MF-0097 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

•Type: Double-beam; •Capacity: 4 tons; •Gauge: 18.5 m; •year of construction 2013; •manufacturer: Tekno Impianti srl; •serial number: 4100.1; •equipped with a winch serial number: CAS 1001. Notes The overhead crane is dismantled and stored outdoors. Stopped since 2020.

Description: Carrying capacity 5 t Approx. Onsite Dimension. (l x w x h): 2,050 x 200 x 300 mm, weight approx.: 105 kg

Description: Carrying capacity 3000 kg Approx. Onsite Dimension. (l x w x h): 800 x 300 x 250 mm, weight approx.: 10 kg

Description: maximum load capacity 3000 kg  ,Power Ac / DC Approx. Onsite Dimension. (l x w x h): 400 x 400 x 300 mm, weight approx.: 15 kg

Hoist: DH 312 H12 Equipped with vaccuum pump + tank Kind of: overhead travelling crane Capacity: 5 ton Span: 16 350 mm Tackle speed: 1,3 & 8 m/min Numbre of riggers : single rigger

weight max.: 2 t stroke: . mm clamping width: . mm serial number: 8684 weight: 2020 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 0,5 t stroke: 500 mm height of hook: 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca. 1988 arm length: 2000 mm weight max. in kg: max. 1000 kg height of hook: max. 2000 mm WITHOUT LIFTING DEVICE: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suspension crane: 2 Stück: : 1. Kran : dimensions: 2500 x 3800 mm : 125 kg : 2. Kran: dimensions: 2500 x 4800 mm : 125 kg for expample for assembly work: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mak 8M332 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information

Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 1000 kg year of manufacture 1985 -Documents: crane inspection book, operating instructions, -Base plate: Ø 685 mm -Projection: 4,390 mm -Total height: 4,350 mm -Hook height: 3,140 mm -Chain hoist: DEMAG type PK5N with main stroke 5 m/min, built in 1973 -Chain length: 3300 mm -Transport dimensions: 950/4630/H1890 mm -Own weight: 1160 kg

maximum capacity: 250 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 600 x 3,400 mm, weight approx.: 1,000 kg

Description: including Demag electric chain hoist, maximum load capacity 500 kg maximum capacity: 500 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,600 x 600 x 4,750 mm, weight approx.: 1,000 kg

Description: Carrying capacity: 5000 kg Incl. runway Track dimensions: approx. 17000 mm Dimensions of the bridge: approx. 12000 mm Attention: the bridge crane can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 17,000 x 12,000 x 5,000 mm, weight approx.: 5,000 kg

Description: Carrying capacity: 320 kg Projection: approx. 3000 mm Approx. Onsite Dimension. (l x w x h): 3,500 x 500 x 2,500 mm, weight approx.: 500 kg

Description: boom maximum 2000 mm , Adjustable in the grid , with manual hydraulic pump maximum capacity: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,250 x 2,000 mm, weight approx.: 360 kg

MAN 6L23/30 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information

Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 500 kg -Documents: crane inspection book, operating instructions, -Base plate: Ø 710 mm -Projection: 3045 mm -Total height: 4,075 mm -Hook height: 3,305 mm -Chain hoist: DEMAG type DKUN5-500KV1F4 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Chain length: 3300 mm -Transport dimensions: 3850/810/H1110 mm -Own weight: 720 kg

Atlas crane AK601. A5 for sale, YOC 1998

Crane hook truss TIGRIP turnstile, little used, slight signs of wear, good condition Load capacity: 1000 kg, Weight: 36 kg, Length of arms: 1.30m

Description: Crane runway length approx. 7000 mm, SWF hoist unit type CA1-045.2P-F, year of manufacture 2017, load capacity 500 kg Approx. Onsite Dimension. (l x w x h): 7,000 x 600 x 500 mm, weight approx.: 220 kg

Power 324 KW, Displacement 12419 ccm, Diesel, permissible Ges. Weight 26000 kg, abs. Mileage 463.083 KM, AMNERKUNG: The loading crane of the vehicle requires a TÜV approval!

Abgel. Running hours 7826 hrs., AMNERKUNG: Vehicle is not road legal!

Description: Voltage 380 V , maximum load capacity 250 kg Rail length approx. 4200 mm , with crossbeam and vacuum lifters without documentation Approx. Onsite Dimension. (l x w x h): 5,000 x 1,900 x 2,500 mm, weight approx.: 500 kg

maximum capacity: 250 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 600 x 2,500 mm, weight approx.: 450 kg

Sorfort available recon crankshaft

BERGEN BVM12 CONNECTING RODS AND CRANKSHAFT FOR SALE.

Description: Serial number 13643 with 4 grid-adjustable attachment points Total length 350 cm Load capacity: 2,000 kg Approx. Onsite Dimension. (l x w x h): 3,500 x 2,100 x 200 mm, weight approx.: 300 kg

Description: Serial number S5791 Adjustable anchor point Shackles, chains and accessories included Total length 210 cm Load capacity: 6,000 kg Including wooden bearing block Approx. Onsite Dimension. (l x w x h): 2,400 x 1,050 x 1,100 mm, weight approx.: 800 kg

Description: Including two load center mounts adjustable in the grid Total length: 410 cm Load hook adjustment range: 200 cm to 400 cm, Load capacity: 15,000 kg Approx. Onsite Dimension. (l x w x h): 4,100 x 400 x 1,000 mm, weight approx.: 1,000 kg

Description: Serial number 20131224 Total length: 460 cm Load hook adjustment range: 150 cm to 450 cm Load capacity: 17,000 kg Approx. Onsite Dimension. (l x w x h): 4,600 x 400 x 1,000 mm, weight approx.: 900 kg

Description: Pillar jib crane Pillar height 3550mm, jib arm length 3120mm Lower edge of jib arm 2750mm, cross-section arm 120x65mm Cross-section pillar 120x120mm Untested / defects or incompleteness cannot be ruled out Approx. Onsite Dimension. (l x w x h): 3,550 x 200 x 200 mm, weight approx.: 100 kg

Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2022 Two trolleys Load capacity: 63t / 63t Span: 20150 mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 303333 , Number of wheels: 8 Wheel diameter: 420 mm Speed: 10 / 40 m/min Disc brake Total electrical connection values Total connected load: 148 kW Starting current (for voltage drop calculation): 747.7 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011364, distance: 20,150 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, With rail: No, Test report available: Yes, Self-running: Yes, maximum capacity: 63 kg, Approx. Onsite Dimension. (l x w x h): 22,000 x 5,000 x 2,500 mm, weight approx.: 45,000 kg

Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2022 Two trolleys Load capacity: 50t / 50t Span: 14500 ,mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 301043 Wheel diameter: 350 mm Trolley travelling speed: 5 / 20 m/min Disc brake Total electrical connection values Total connected load: 84 kW Starting current (for voltage drop calculation): 407,9 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011368, distance: 14,500 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, With rail: No, Test report available: Yes, Self-running: Yes, maximum capacity: 50,000 kg, Approx. Onsite Dimension. (l x w x h): 15,500 x 5,200 x 2,400 mm, weight approx.: 19,500 kg

Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2021 Two trolleys Load capacity: 100t / 63t Span: 20150 mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 304116 Number of wheels: 8 Wheel diameter: 500 mm Speed: 10 / 40 m/min Disc brake Total electrical connection values Total connected load: 148 kW Starting current (for voltage drop calculation): 747.7 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011067, distance: 20,150 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, Test report available: Yes, Self-running: Yes, Pulling height max.: 15 m, maximum capacity: 100,000 kg, Approx. Onsite Dimension. (l x w x h): 22,000 x 5,000 x 2,500 mm, weight approx.: 45,000 kg

Description: Track gauge 8000 mm Bridge wheel diameter 320 mm Rail width 60 mm Radio control - Hand control  , RAIL LIFT Drum diameter 324 mm Rope diameter 16 mm For further information attached PDF file serial number: 5,194, Hoist: electric chain hoist, Crane control: wired control, With rail: Yes, maximum capacity: 25,000 kg, Approx. Onsite Dimension. (l x w x h): 9,500 x 28,000 x 10,500 mm, weight approx.: 40,000 kg

There are 4 Abus cranes available. 1.) ABUS VS 355 2.)ABUS VS 3.)ABUS VS 4.)ABUS VS. 1) ABUS VS 355 incl. dowel plate, year of manufacture: 1987, lifting capacity 750kg, lifting height 3000mm, construction height approx. 3800mm, reach 4000mm. 2.)ABUS VS, year of manufacture: 1986, lifting capacity 1t, lifting height 4700mm, reach 5000mm. 3.)ABUS VS, year of manufacture: 1986, lifting capacity 2t, lifting height 4820mm, reach 5000mm. 4.)ABUS VS, year of manufacture: 1986, lifting capacity 2t, lifting height 4820mm, reach 5000mm.

Hydraulic power unit for mobile clinching pliers or mobile formers ECKOLD type HA 500 / 2 Fabr. No. 737 / 783 Year of construction 1991 Hydraulic power unit type HA 500 / 2 Operating pressure adjustable 50 - 500 bar Flow rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Nominal power 3.1 kW Mains connection 380 volts, 50 Hz. Control voltage 24 volts, DC pressure line with screw coupling - With solenoid valve HAWE GS 2-2 - mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition; used

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful area: 1290 x1130 mm (product height 170 ? 250 mm) Useful area: 1290 x900 mm (product height 250 ? 500 mm)

Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...

Mobile pumping station w / air driven pump and 2 "camlock couplings and flushing. Build in PE plastic.

Year of construction: 1992