mobil scrap used for sale

Used Lid Caper CMI, Type: TA 1 PP Brushless - the machine was used for twist-off glasses - can be used almost for any type of vessel - new conveyor belt with motor - incl. some new format parts - Compressed air is required - Power: up to 35 vessels /minute - El. Connection: 400 V, 50 Hz, 3.5 kW - Net weight: 1,200 kg Viewing and test run are possible by arrangement.

As good as new mobile car press type Orca 4800 P with radio remote control and parcel ejection door. Very good condition. Only 871 operating hours. Length press box 4800 mm, width 1850 mm, pressing pressure 2 x 160 to and 150 to ready-to-print parcel. Mobile on Roll-off frame. Powered by diesel engine.

Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Mobile car and scrap press type Ecotechnika P 5250 with loader crane. Good condition. Only 2950 operating hours. At call!

Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fou ...

Storage box or scrap box according to photo. The box can be transported by forklift or crane. In the case of crane transport, there is a third eyelet at the bottom for tipping. Weight approx. 411 kg Multiple available! Price per piece!

Hydraulic guillotine shear: 1.870x1.070 mm, brand: Gester, model: TN-100, engine: 30 hp, 100 TN force.

Our company provide a Lefort C850T machine with complet refurbishment. The machine is a full extra machine has the following extras: -Full Tunner pusher -Window crosshead -Soft started -Oil Heater -Pre-feeder -Central Greasing system For our refurbishment we provide warranty, and man power for the assembling and commisioning. The Estimated delivery time will be end of May. In case of need, we can provide platform and cabin for the customer. Technical details: Cutting force:850T Hold down force:200T Pusher force: 120T Open Box Section: 8000x2400x1000 mm Closed Box Section:8000x1000x700 mm Lid cylinders: 4x175T Power Source: 2X182Kw Electric engine Own Weight:150T And what we done on the machine? Just a few examples: -Complet refurbishment of the shear head -At the box we changed: -- Wear plates in 4 sides -- Hinges -- 4 New lid cylinder completly -Complet Refurbishment of all pumps -Recon ...

Hydraulic shear (guillotine) 80 TN force. Measures cut width: 1.400 mm, height: 1.500 mm, motor: 60 hp. With electrical panel.

Band width: 150mm; Table size: approx. 2500mm x 800mm; Suction port: 140mm; Motor power: 3kW; Machine length: approx. 3400mm; Machine width: 1200mm; Weight: 400kg; Robust design also allows the machining of longer workpieces grinding unit swivels, thus can also be used as an edge grinding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the abrasive belt High belt speed of 17 m/s right-counterclockwise rotation Upper sanding sole with graphite coating 4-ply sprung sanding pad With movable sanding pad for oblique surfaces Smooth-running grinding table even under high loads due to heavy workpieces Optimal price-performance ratio

Metal scraper TRELLEBORG WM 25x12x7 WM0000120-NBMS0 Inner diameter: Ø 12 mm Outer diameter: Ø 25 mm Height: 7.0 mm Material: N7BSI New ! Dimensions: 25 x 25 x 7 mm

TMC PADOVAN MARGARINE & SHORTENING CONTINUOUS CRYSTALLIZER VOTATOR KOMBINATOR SCRAPE SURFACE HEAT EXCHANGER FOR MARGARINE AND SHORTENING CRYSTALLIZATION CYLINDER DIAMETER 40 CM CYLINGER LENGTH 220 CM WORKING PRESSURE 70 BAR COOLING GAS AMMONIA MOTOR POWER 45 KW YEAR: 2012

Condition: Very good condition

We are provide a Taurus SM 540P-2560.22E machine as a used working condition with the folllowing repairs: New PLC with radio remote control and 6 month warranty,High voltage cabinet recondition, Bronz bushes changes and general repair.

lid shear with 550 t shear force, 1m shear width, 6 m press box, 150 kW hydraulic drive. Hydraulic unit, shear head (partly), switch gears, control room, control system new in 2021, press box with cylinders refurbished in 2021. Production approx. 15 t/hr.

Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 150 x 30 mm -Wingspan: 190mm -Number: 1x vices available -Price per piece -Dimensions: 485/210/H190 mm -Weight: 26 kg

Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 150 x 30 mm -Wingspan: 240mm -Dimensions: 490/325/H200 mm -Weight: 26 kg/pc.

Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg

ID2757 Scraper conveyor scraper conveyor 13 m long, 115 cm wide inside, 180 cm wide outside Scraper conveyor 13 m long, 115 cm wide inside, 180 cm wide outside

Dehairer Abele Total power: 12 kW Engine: 2.2 kW Two-shaft with ejection arm External dimensions: 2200 x 900 x 1300 mm Working dimension: 1700 mm Condition: Used, very good

General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...

General SKU354T1373 LocationBarneveld MakeSchroder Kombinator TypeVEMK 01/108-350 No.11/4053-1-182757 Year of construction2002 Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heatexchangers Mixercheck Capacity1,8Ltr. Information Total height1,7m Weight380kg CEcheck Floorspace1,7x0,65m Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

SCRAP CHOPPER The Model CE450 DDX boasts power alongside a dual driven feedworks. Driving both feed rolls on the chopper allows the unit to process scrap quickly and efficiently. The Model CE450 DDX is Sweed’s chopper of choice for companies processing large volumes of scrap plastic or PET strapping. This chopper is extremely versatile and can be customized for inline automated production applications requiring tension control and custom scrap lengths. The Model CE450 DDX is designed to fit on several Sweed stands that can accommodate a variety of scrap collection containers. Custom stands and additional safety upgrades are also available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. The following are materials commonly processed through the CE450 DDX. Please consult a Sweed representative to ...

- For 800 x 1200 mm and 1000 x 1200 mm pallets - With large bottle table with 90° outlet - Machine in good condition - Machine available immediately - Videos available on request

The JMC 407 is the top seller among our alligator claws. It is cost-effective, has sufficient knife length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, piping, motors, gearbox housings. The scissors are also often used for cleaning scrap metals or cutting vehicle radiators. The machine is equipped with a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. By means of a foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted by means of simple clamping screws. The scissors are from our demonstration pool and can be viewed or tested.

Description: SPECIFICATIONS Character: Lefort Gosselies Measuring length: 600 mm Hydraulic drive: Yes Scrap shears: Yes Approx. Onsite Dimension. (l x w x h): 2,700 x 1,000 x 1,200 mm, weight approx.: 1,550 kg

Description: SPECIFICATIONS Character: NN Type: 750 Machine dimensions (L×W×H): 4,850 x 1,250 x 2,000 mm Measuring length: 750 mm Power main drive: 22 kW Electric drive: Yes Hydraulic drive: Yes Machine weight: 7,500 kg Scrap shear: Hydraulic lower holder weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 1,500 x 2,000 mm

Scraper chain conveyor WISSMATEC hot-dip galvanized

used scrap shears Lindemann LU800/8 PA60 with 4x 90 kW main drives, shear force 800t, shear width 800 mm, press box length 6 m, ready for operation

An Arnold rail crusher is offered from the site, consisting of: - Rail breaker with hydraulic system - Feed roller conveyor - Sling device with separating device - Swivel discharge conveyor - Control room The system is operational and still in use.

Description: belt width: 1500 mm Approx. Onsite Dimension. (l x w x h): 9,300 x 2,400 x 5,000 mm, weight approx.: 1 kg

Description: machine number: 6114.14 serial number: 260036616 T pressing pressure: 155 kN motor power: 4 kW Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,800 mm, weight approx.: 1,000 kg

Hydraulic power unit for mobile clinching pliers or mobile formers ECKOLD type HA 500 / 2 Fabr. No. 737 / 783 Year of construction 1991 Hydraulic power unit type HA 500 / 2 Operating pressure adjustable 50 - 500 bar Flow rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Nominal power 3.1 kW Mains connection 380 volts, 50 Hz. Control voltage 24 volts, DC pressure line with screw coupling - With solenoid valve HAWE GS 2-2 - mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition; used

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful area: 1290 x1130 mm (product height 170 ? 250 mm) Useful area: 1290 x900 mm (product height 250 ? 500 mm)

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

Year of construction: 1992

Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...

Mobile pumping station w / air driven pump and 2 "camlock couplings and flushing. Build in PE plastic.

Material container made of stainless steel, 150 l, mobile, with telescopic suction tube and hinged lid

Drum/screen for Doppstadt SM - model -Chain drive (24 B1) -sandblasted, newly painted Very good condition Available drums: 1. for Doppstadt SM518 / length: 4.7 m / diameter:. 1.8 m /. Price: 19900 PLN: 4800EUR -15 x 15 mm -20 x 20 mm -25 x 25 mm -30 x 30 mm -35 x 35 mm -Fi 80mm 2. for Doppstadt SM618 / length: 5,5 m / diameter: 1.8 m /. Price: 23000 PLN: 5500 EUR -12 x 12 mm -15 x 15 mm 3. for Doppstadt SM620 / length: 5,5 m / diameter: 2.0 m /. Price: 25000 PLN: 6000EUR -10 x 10 mm - 13 x 20 mm -Fi 45 4. for Doppstadt SM718 / length: 7.1 m / diameter: 1.8 m /. Price: 27000 PLN: 6450EUR -10 x 10 mm -70 x 70 mm -Fi 150 / 1 szt. 5. for Doppstadt SM720 / length: 7.1 m / diameter: 2.0 / m /. Price: 31000 PLN: 7400EUR -12 x 12 mm

Spiralkneter KEMPER, type: ECO 125 AE - for approx. 200 kg dough, 125 kg of flour - machine in the bakery - year of manufacture: 10/99 - State: goods - incl. 2 piece stainless steel boiler -El. Supply: 400 V, 50 Hz, 3Ph, 50 A Inspection and test run are possible by arrangement like.

Spiral mixer BOKU, type: Th SK 240-áberholt-- incl. 3 retractable boiler â for up to 240 kg dough - including delivery. The machine is being over Germany after order confirmation.

Liebherr handling excavator in top condition with HD suspension, balloon tires, gelaendefaehig! Type 932 Litronic HD HD chassis Weight approx. 37,000kg Built in 2001 magnetic system, automatic levelling at discontinuation, boom 7m, stem 5m, Preheater for motor oil and hydraulic oil. Strong lifting force, e.g. mobile without settling over 10,000kg. technically very good condition. optional accessory (available at an additional cost): G3pdl8ila Quick-change system Shovel for earth movement Magnet or swivel magnet Gripper for scrap Clamp for round material such as baeums or pipes Transport mass: Width 3,000mm Length without sti-steal6,000mm Transport height 3,560mm Former new price approx. 890.000.-DM Special price

Mobile press system with belt or packing press - can be varied by hourly performance More detailed information on request!; New machine - best condition

J. Engelsmann mobile lifter for containers etc., max. weight 300kg, fork length approx 700mm, fork diameter 50mm, fork gap approx. 600mm, max. lift approx. 1700mm from the floor.