mobil scrap used for sale

Cat. No. 11-3600-5 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 600 litres Height on the ground: 1835 mm Height on the top: 1200 mm Total height: 3035 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-6 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 800 litres Height on the ground: 1835 mm Height on the top: 1550 mm Total height: 3385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 11-3600-7 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 500 litres Height on the ground: 1485 mm Height on the top: 1050 mm Total height: 2535 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

Cat. No. 11-3600-8 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 600 litres Height on the ground: 1485 mm Height on the top: 1200 mm Total height: 2685 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat.-No. 13.0327 in a very good condition ground inside and outside grain 180 for an additional charge with agitator upper bottom: • thread connection DN 50 and DN 25 tank body: • 2 openings for agitator Ø 450 mm and 280 mm lower bottom: • on 4 adjustable feets Measurements and weight: Height x diameter: 3400 x 2300 mm Height tank body: 2000 mm Weight: approx. 2 t Operating instruction for control valve and drawing available. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 11-3600-9 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 500 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 500 litres on the top: 500 litres Height on the ground: 1335 mm Height on the top: 1050 mm Total height: 2385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

Cat. No. 11-3600-9 New V2A storage tank / combination tank / stacking tank with cooling jacket standing round on feet Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (base): 500 litres top (stack): 500 litres Base tank height (bottom): 1335 mm Stacking tank height (top): 1050 mm Total height: 2385 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905- ...

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Power: 150 kVA / kW 120 Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-282 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: approx. 450 litres Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24 V / 2 x 143 Ah Generator switch: Yes Accessories: Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm Weight: approx. 8000kg

Cat.-Nr. 08-1209 in a very good condition with Flat Bottom Volume: approx. 25.000 Litre / Chamber Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

2 piece "Backlog from series production" Capacity: 330 kVA / 264 kW plus 10% overload Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-353 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: 550 l Switchgear / Starter: automatic switchgear for parallel operation Battery voltage / capacity: 24 V / 2 x 143 Ah Ggenerator switch: Yes Power switch: No Automatic: Yes - Kuhse Accessories: weather protection cover, Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Cat. No. 12-1075 in very good condition New price: 2000€ Dimensions and weight: LxWxH: 70 x 48 x 103 cm Weight: 38 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 12-2070 in very good condition Material: V2A – AISI 304 (1.4301) – Surface: inside and outside 2B=IIIC Upper Bottom: With ventilation hose DN 350 With weld-on fitting centrally located on upper bottom DN 65 With T-distributor threaded connection, one side DN 25 other side DN 50 With 2 crane lugs Tank Body: With manhole lid 450x350 mm With connection flange DN 300 for agitator on the side With connector for spray ball under the agitator Lower Bottom: With outlet DN 100 centrally located On 5 adjustable feet Measurements and Weight: Length: 5450 mm Tank Body Height: 3900 mm Diameter: 3300 mm Weight: ca.3,5 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on d ...

Cat-Nr. 12-1065 in a very good condition Capacity: 10 bar Original Price: Euro 3000,- Measurements and Weight: LxWxH: 84 x 32 x 100 cm Weight: 27 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat-Nr. 10-2460 in a very good condition Material: V2A - AISI 304, 1.4301 Surface: inside: IIID, outside marbled Upper Body: with Manhole Lid DN 400 with 4 Screws with Clamp Closure, with Fermentation Lock DN 50, with 4 Eye Hooks Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height: 1570 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 12-1090 in a very good condition Capacity: 4000 litres/h Year of Construction: 1981 Masch-Nr. 21628 Original Price: Euro 6000,- Measurements and Weight: LxWxH: 126 x 40 x 109 cm Weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot weight PS 519 g Injection power: 713 CC/s Screw speed: 259 1/min Plasticizing power Max: 49 g / s Nozzle system power: 110 kN Electro-hydraulic equipment Pump motor power: 45 kW Installed power: 23 kW  ...

Year end 2014 Of the highest standard Width 400 mm Conveyor belt with food approved Very easy to clean Retractable side guides Mobile Very stable New price: 23500.00 Price is ExWorks Behamberg. Length pitch etc are customizable on-demand! The band is now available.

Cat-Nr. 12-1040 in a very good condition Capacity: 12.000 litres/h Motor capacity: 4 kW New Price: 5000€ Multistage (3 Stages) Measurements and Weight: LxWxH: 124 x 38 x 112 cm Weight: 154 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

FOR SALE S.E.M.T. PIELSTICK PC3. 0 NEW ORIGINAL SPARE PARTS HAVE A GDY SIR WE VE BELOW LISTED NEW ORIGINAL SPARE PARTS OF S.E.M.T PIELSTICK PC3 AT OUR STOCK IN TURKEY. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. MAIN BEARING SHELLS STD 2 PAIRS THRUST BEARINGS 1 PAIRS LINER ORING 50PCS CON ROD BOLT 3 PC CON ROD BUSH 3 PCS BARREL PLUNGER 4 PCS PISTON RING KIT H 12 SET VARIOUS PISTON RING 93PCS PCS PISTON PIN RING 20 PCS GASKET OF CYLINDER HEAD KIT 3 PCS EXHAUST VALVE 5 PCS ENJEKTOR LONG SPRING 15 PCS ENJECKTOR SHORT SPRING 12 PCS ENJECTOR NUT 4 PCS ENJECTOR NOZZEL 15 PCS ENJECTOR DELIVERY VALVE 25 PCS LOCATING PIN 16 PCS . Capt. Ayhan Ugurlubay Best of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Cat.-Nr. 12-1085 in a very good condition New price: 2000€ Measurements and Weight: LxWxH: 50 x 35 x 105 cm Weight: 48 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat-Nr. 12-2260 new Sugar Dissolving Tank with Cooling and Heating Jacket, with Insulation - 50.492 Litres in AISI 304 Product Thickness: 1,4 kg / Ltr – 65°C Working Pressure: pressureless Capacity: 50.492 Litres Material: V2A - AISI 304 Surface: 2B welding inside polished Insulation: in mineral wool thickness = 50 mm, completely in stainless steel and welded Thermoplate/Cooling Jacket H=5500 mm Thickness: 2.0 mm Working Pressure (Thermoplate/Cooling Jacket): max. + 3.0 bar – Medium: Water Upper and Lower Bottom: conical shape With manhole lid Diameter: 500 mm With inlet and outlet air controll With level indicator with borosilicate, scale With sample valve With spray head diameter 65 mm demountable with CIP pipe till the bottom of the cylinder + thread connector NW 80 With butterfly valve DN 65 for clear outlet With butterfly valve DN 65 for waste ou ...

Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

FOR SALE... NOHAB DIESEL F30 NEW & GENIUE SPARE PARTS AT TURKEY. HAVE A GOOD DAY SIR; WE VE NEW UNUSED SPARE PARTS OF NOHAB DIESEL F30 ENGINE AT OUR STOCK WE'VE MORE THAN 198 NEW ITEMS. PLS FIND SOME SELECTED ITEMS AS BELOW WE VE ALSO RECON SPARE PARTS. RECON PISTON 4 GROOVES (4 PCS piston SCHMIDT & 1 PCS MAHLE) 5 PCS RECON CYLINDER LINERS (WITH CLASS STAMPED) 5 PCS RECON CYLINDER HEADS FULL (WITH VALVES & SPRINGS) LLYODS STAMPED 2 PCS RECON FUEL INJECTION PUMPS BOSCH 12 PCS RECON OIL PUMP 1 PCS OVERHAULED COMPLATE FUEL INJECTORS 10 PCS RECON FUEL FEED PUMP 1 PCS . IF YOU HAVE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. PLS FIND SOME NEW SPATE PARTS ITEMS LIST PISTON 4 GROOVES PISTON SCHMIDT 9198100965 1 LINER DNV TESTED ...

FOR SALE .. WESTFALIA GEA BILGE MASTER 1500 COMPLATE SYSTEM YOB 2007 AT TURKEY ... HAVE A GDY SIR; WE VE COMPLETE SYSTEM WESTFALIA GEA BILGE MASTER 1500 AT STOCK. PLS FIND DETAILS OF SYSTEM. — BILGE MASTER 1500 YOB 2007 SER NO 9017-909 IMO CERTIFICATE 330 238 / MEPC 107 (49) — BILGE WATER CENTRIFUGE GEA WSD8 01 037 YOB 2007 S No 9039 654 —OIL MONITOR OMD 2005 —COMPLETE WESTFALIA CONTROL PANEL --GEA FILTER AF 300 YOB 2006 -- FEED PUMP IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Cat. No. 12-1080 in very good condition Measurements and Weight: LxWxH: 820 x 34 x 90 cm Weight: 38 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-2945 New Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: stable stack crown Manhole lid DN 400 6 x Star Head Eye Screws 1 x Threaded welding nozzle DN 50 with blind cap 1 x Overpressure valve 1 x CO2 ventilation valve Body: 4 x Beading stiffeners Underbody: forward pulled outlet pipe DN 50 Cone floor 4 feet, very stable design with pallet truck underpassable with forklift shoes for fork holder Supplement (on request): Fermentation spandconnection DN Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. Weight 85 kg Height 1410 mm Diameter 700 mm Cylinder height 750 mm Material AISI304 (V2A) 1.4301 Test pressure 3.4 bar Construction form vertical Working pressure range +2/-0.15 b ...

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repairs of engines ...

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

SUB: FOR SALE... MITSUI MAN B & W 6L 60MCE NEW MAJOR PARTS . HAVE A GDY SIR; WE VE NEW UNUSED MAJOR PARTS OF MITSUI-MAN B & W 6L 60MCE ENGINE. PLS FIND LIST AT BELOW. IF YOU'VE ANY FURTHWER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. ALL PARTS READY TO INPSECT AND TRANSPORT. NEW CYLINDER LINER 2 NEW PISTON HEAD 1 NEW WATER JACKET 1 RECON FULL CYLINDER HEAD 1 NEW INJECTOR ATOMIZER 3 NEW SCRAPER RING 332C F/G 4 NEW SEALING RING PACK 332C / C 2 NEW SPREADER RING 332 CE 8 NEW STUFFING BOX O-RING 3 NEW PISTON ROD O-RING 12 PISTON STOPPER 332B 14 Capt. Ayhan Ugurluba Best Regards ; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Brand Mutfakci Model MLP100 ID M50 Status Active Price 600 € + VAT Year of manufacture 2004 Power 10 KW Location Oradea, Romania Gas Rotisserie - 9 spit: Mutfakç? MLP100 with 9 spit rods capacity (1030 mm each), capacity: 36-40 chickens, stainless steel casing, each spit rod can spin independently, inner light, fat collection drawer. Dimensions 1320 x 570 x 1800 mm. Motor voltage: 380 V, 10 kW. Spit rods are missing. The can be ordered from the manufacturer. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, chang ...

Cat. No. 12-1160 in very good condition Measurements and Weight: LxWxH: 80x40x105 cm Weight: 30 kg Manufacturer: Maselli Misure Process Analisers Model: UR 6 W AL Serien-Nr 30384 Range 40 150 0 Temp: 20°C Voltage: 220 V For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

HAVE A GOOD DAY SIR. WE VE 1 PCS NEW UNUSED 1 PCS REBUILT WOODWARD UG ACTUATORS AT OUR STOCK . PLS FIND PART NUMBER AT BELOW PART NO. A8251-568 GG A8251-000 6 - WE VE 8 PCS USED WOODWARD UG ACTUATORS. PLS FIND SERIAL NUMBER AND DTLS AT BELOW.. PART NO. A8251-568 GG A8251-568 A8251-568 CW A8251-568 GH A8251-568 GG A8251-568 GG A8251 006 6 A8251 560 MH IF YOU INTEREST WE WILL OFFER YOU. ALL PARTS IN IZMIR TURKEY IF YOU'VE ANY QUESTIONS PKS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Cat. No. 11-3247 in very good condition in AISI 304 Measurements: Diameter: 2450 mm Height: 3500 mm Weight: 2950 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

FOR SALE: B & W HOLEBY 5L 23/30H MAJOR PART HAVE A GOOD DAY SIR WE VE BELOW LISTED MAJOR part OF MAN B & W HOLEBY 5L 23/30H GEN SET AT OUR STOCK.. 1 PCS STANDART SIZE CRANK SHAFT (YOB 1994) 7 PCS CYLINDER HEADS (CRACK FREE & SEALING SURFACE NOT WELDED BEFORE, EXH SEATS IN NOMINAL SIZE ) 10 PCS PISTON STD GROOVES 10 PCS CON RODS CRACK FREE 8 PCS FUEL INJECTION PUMPS (L ORANGE) 2 FRESH WATER PUMPS 1 OIL PUMP 1 FUEL OIL FEED PUMP 2 PCS AIR STARTER COMPLETE T/C NR 15 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to  ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Cat. No. 12-1110 in a very good condition Capacity: 4000 litres/h Pressure: 10 bar Rotating speed: 1425 U/min Original Price: 3000€ Measurements and Weight: LxWxH: 82 x 38 x 105 cm Weight: 63 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser ), which is usually applied layer construction for large volume components in 3D mold ma ...