mobil band used for sale

KESMAK BANDSAEGE TYPE KMY 2DG 450 - Half-automaat - Hydraulic - Traploos adjustable snelheid 15/90 m/min - Dubbel vertek - Zaagdruk hydraulic instelbaar - Koeling - Zaagblad 5780 x 41 x 1.3 mm - Noodstop - Documentatie - Weight 1800 kg - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Capacity round maximum diameter: 810 mm Angle degrees maximum: 480 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   3542 MERK  Knuth Germany TYPE  HB 810 L YEAR   2008 SPECIFICATIES  Circel / Band zaagVol / Half automaat  Bandsaw Verstek zagen links en rechts ˚Graden  ANgle cutting 45 Gr .Capaciteit bij 90 ˚ Graden rond Ø  810 mm Capaciteit bij 90 ˚ Graden plat  810 x 850 mm Capaciteit bij 45 ˚ Graden rond Ø  810 mm Capaciteit bij 45 ˚ Graden plat  480 x 850 mm Zaag blad / band afmeting  8200 x 41 x 1,3 mm Zaag snelheid M/Min. 20 - 100 M/min AFMETINGEN Lengte  3900 mm Breedte  1200 mm Hoogte 3350 mm  

Height under guides: 90 mm Throat: 0 mm Table length: 400 mm Table width: 400 mm Make  Amada HA 4 Type HA 400 Year 1982 Bandsaw automat Capacity round max. diam.Cap = 400 x 400 Angle degrees max.Speed = 15 - 90M Type machine: Vert./Hor.Power 5.5 kW Workpiece height (mm) Chip conveyor Workpiece width (mm)Load = 2500 kg Capacity rectangle (mm) 90 Gr. Cutting Capacity square (mm)Bundel clamp Managing the cycle of automatic travel included various lengths in the same quantity cycle Control of pressure and cutting speed Pressure regulation of vice clamping Screw chip conveyor Coolant system  

Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9

Electrical voltage 400 / 440 V Frequency 50 / 60 Hz N° Phases 3 / 3 Ph

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Dough pre-portioner 3 rolls dough strip former from Rijkaart with 45cm tape and roll width with large hopper.Machine is mobile on rollers, 400 volt connection.Machine is immediately available in the warehouse. 1x Roller 45cm wide large funnel on large rolls with a set-up completely made of stainless steel

Ultrasonic banderolier ATS US 2000 AB; good condition; maintained and verified by ATS Customer Service; Bandwidth 30mm; Frame 360x260mm; extendable large roll magazine; Automatic or foot operation. Ultra sonic banding machine ATS US 2000 AB; good condition; cleaned and checked by the support of ATS; band width 30mm; Frame 360x260mm; big size magazine; automatic or foot switch.

Ribbon roundwirer for Seewer Rondo Kombi roll-out machine

HABUSCH BANDSAEGE TYPE CY355 - Half-automaat - Hydraulic - Traploos adjustable snelheid 20/80 m/min - Dubbel vertek - Zaagdruk hydraulic instelbaar - Koeling - Zaagblad 3770 x 34 x 1.1 mm - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

KESMAK BANDSAEGE TYPE KMY DG 350 - Half-automaat - Hydraulic - Traploos adjustable snelheid 20/100 m/min - Verstek - Zaagdruk hydraulic instelbaar - Koeling - Zaagblad 4860 x 34 x 1.1 mm - Noodstop - Documentatie - Weight 1260 kg - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Kiener Straffbanderolier Auto Skinetta 450 with slinging chain strap and shrink tunnel with bar chain strap and hot air blower sideways and from above. Siemens Control Film width 40-450 mm

Horizontal automatic band saw machine make RÜSCH type AS 300Sawing range up to: 310 mmor: 310 x 310 mmSection length min: 4 mmSection length max: 500 mmCutting speed: 20 - 70 m / min.infinitely adjustableCutting pressure: approx: 2 - 35 kg, infinitely adjustableSaw band dimensions: 4,150 x 27 x 0,9 mmDrive power: 3.0 kWWeight: approx: 1.300 kgFootprint L x W x H: 2000 x 2300 x 1500 mmWith- Pliers feedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-column CNC fully automatic bandsaw make MEBA type 430 AMachine -No: 6397 Year 1999Cutting area around 90 °: 430 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0 flat 90 °: 430 x 430 mmCutting speed stepless: 18 - 95 m / minCutting pressure: 10 - 40 bar - stepless hydr.Saw band: 5800 x 41 x 1.3 mmSaw blade tensioning: hydraulicMaterial feed Single stroke: 0 - 600 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0 Multiple stroke: 0 - 6000 mmRemaining length manual operation / automatic: 20/70 mmWorking height: 750 mmHydraulic unit: 35 - 40 lCoolant tank: approx. 120 lTotal power requirement: 7 kWDimensions approx: 3100 x 2500 x 2000 mmWeight approx: 3200 kgWith- Control SIEMENS COROS OP 15- hydraulic belt tension- stepless saw blade drive- hydr. Full stroke material tension in front of and behind thexa0xa0 Saw band with m ...

Horizontal band saw machine make BEHRINGER type HBP 400 AMachine -No: 182171 built in 1982Technical specifications:Working area around: 400 mmSquare working area: 400 x 400 mmstepless cutting speed: 16 - 100 m / min.Material feed length: 800 mmSaw band dimensions: 5800 x 38 x 1.3 mmDrive motor: 5.5 kWTotal power: 7.5 kWWeight approx: 3200 kgDimensions approx: 3000 x 2450 x 1850 mm:with- chip conveyorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC controlled horizontal automatic band saw make BEHRINGER type HBP 220 A CNCMachine -No: A7-46485-187164 built in 1987Technical specifications:Cutting area round 220 mmCutting area square 350 x 220 mmCutting speed stepless 20 - 140 m / minSaw band dimensions 3720 x 32 x 1.1 mmDrive power 3.0 kWDimensions 2400 x 800 x 1500 mmWeight approx 1000 kgWith- CNC Control- Enter the data for length and quantity- Chip conveyorused, in very good conditioncontrol defective - sale as spare parts dispenser or rebuildspecial pricePrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Fully automatic horizontal band saw machine make AMADA type HA 250Machine -No: 461216 built in 1990Technical specifications:Saw range around: 250 mmSawing area flat: 175 x 300 mmSaw band thickness / width / length: 0.95 / 25 / 3505 mmSaw blade: 3505 x 25 x 0.95 mminfinitely variable belt speed: 27-40-54-68-80 m/minautomatic feed : 0 - 800 mmElectric drive saw band/hydraulic: 2.2 / 0.75 kWWeight approx.: 1200 kgused, not functional as a spare parts donorPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal automatic band saw make MEBA type Mebamat 250 A-5Make -No: 31164, year of manufacture 1972Technical specifications:Cutting range round: 250 mmCutting area flat: 250 x 250 mmmax. section length: up to 400 or up to 800 mmSaw band dimensions: 3800 x 25 x 0.9 mmfeed rate hydr. infinitely variablestepwise cutting speed adjustable: 20 - 104 m/minSaw drive: 1.1 / 1.5 kWHydraulic: 1.1 kWelectr. Connection:380VRequired space L x W x H: 1970 x 1620 x 1230 mmWeight: 900kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

KARMETAL BANDSAEGE TYPE KMT 250 CRAFT DM - Traploos instelbare lintzaag snelheid - Dubbel vertek - Zaagdruk hydraulic regularbaar - Snelspanklem - Koeling - Automatic afslag - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Horizontal band saw make PEHAKA type HS 260Year of construction 1981Cutting area around 90 °: 260 mmCutting area flat 90 °: 400 x 155/370 x 180 mmCutting area square 90 °: 220 x 220 mmCutting area around 45 °: 170 mmCutting area flat 45 °: 160 x 145 mmCutting area IPE 45 °: NP 24stepless saw blade speed: 20 - 60 mm / min.Saw band size: 3650 - 3700 x 25 x 0.9 mmDrive power: 0.75 kWWeight approx: 360 kgOutside dimensions approx: 2200 x 1000 x 1300 mmWith- Returning deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw machine make PEHAKA type HS 340Machine -No: 27354 for semi-automatic workflowTechnical specifications:Working space 90 ° round: 340 mmWorking area 90 ° flat: 340 x 500 mmWorking space 45 ° round: 230 mmWorking area 45 ° flat: 200 x 300 mmControl range: 12 - 80 m / minSaw drive: 4 kWSaw band: 4860 x 32 x 1.1 mmRoll diameter: 500 mmRequired space: 2700 x 1600 x 1900 mm highWeight: 1050 kgWith- Infinitely variable cutting speed- hydr. Raising and lowering the saw frame- Control panel on the saw armused, in good working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw machine make HESKA type HES 260Fabr. -No: 20709.01, year of construction 2001Tehnical data:cutting areaaround 90 °: 260 mmaround 45 °: 160 mmflat 90 °: 525 x 120 mmflat 45 °: 160 x 260 mmSquare 90 °: 260 x 260 mmflat 45 °: 160 x 160 mmMiter adjustment required by turning the jawsSaw engine approx. 0.6 / 0.8 kWCoolant engine approx.: 0.09 kWCutting speed: 15-90 m / minSaw blade dimensions: 3660x25x0.85 mmNet weight approx: 360 kgSpace required approx.: 1900 x 800 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw make JAESPA type W 260Fabr. -No: 14759 built in 1989Technical specifications:Cutting areas90 ° round: 260 mm90 ° flat: 410 x 200 mm90 ° square: 260 x 260 mm45 ° round: 250 mm45 ° flat: 220 x 220 mm45 ° square: 245 x 210 mmSaw band speed continuously: 17 - 106 m / minSaw band dimensions: 3660 x 25 x 0.9 mmDrive power: 1.1 kWExternal dimensions approx .: 1950 x 950 x 1600 mmWeight approx: 520 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical band saw make JAESPA type MSP 4Machine -No: 714630, built in 1971for sawing steel, stainless steels, nickel alloysGray, temper, cast steel and similar materialsRoll diameter: 420 mmCutting height: 325 mmProjection (cutting area): 400 mmBandwidth max. : 25 mmcontinuous belt speed: 15 - 300 m / min.Table size: 600 x 600 mmTable left: left 15 ° / right 45 °Band saw blade length: 3200 - 3400 mmDrive power: 1.0 / 1.5 hpWeight: 400 kgExternal dimensions: 920 x 640 x 1850 mmColor greenWith- stepless band saw speed- Bandsaw welder IDEAL BS0 16 mm with scissors- Grindstone- near tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...

Vert. Metal band saw machine make JAESPA type MSU 4 CMachine -No: 1060578 Year 1978Roll diameter: 420 mmusable projection or cutting width: 405 mmmax. cutting height: 450 mmTable size: 615 x 615 mmTiltable table: 10/15 °Belt speed continuously up to: 250 m / min.Saw band size: 3640/3625 x 20/3 mmDrive power: 1.0 / 1.5 kWDimensions L x W x H: 900 x 850 x 2000 mmWeight approx: 470 kgWith- Bandsaw Welder Ideal BS 16- chip air compressor- Cutting device for band saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.

Vertical metal band saw make PEHAKA type USM 4Mash. -No: 3305175/5127Projection: 410 mmCutting height: 300 mmCutting width: 385 mmBandwidth: 3 - 13 mmRoll diameter: 400 mmTable size: 610 x 610 mmTable load: 50 - 80 kgTable tilt: 35 ° R / 12 ° LTape length from: 2900-3040 mmSawing speed: 15-90 / 300-1800 mm / minDimensions: 800 x 1000 x 2150 mmSaw drive: 0.8 / 1.1 kWWeight approx: 400 kgWith- Bandsaw welder IDEAL BS 0-16- Grindstone- tiltable tableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical band saw make WESPA type MSP 4Mash. -No: 621092for sawing steel, stainless steels, nickel alloysGray, temper, cast steel and similar materialsRoll diameter: 400 mmCutting height: 280 mmProjection (cutting area): 400 mmBandwidth max. : 25 mmstepless belt speed: 0 - 150 m / min.Saw blade size: 2880/2980 x 25 x 0.9 mmOutside dimensions approx: 900 x 700 x 1800 mmWith- Banded butt welder IDEAL BS 25- Grindstone- tiltable tableused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical metal band saw machine make JAESPA type MSU 4 CRoll diameter: 420 mmusable projection or cutting width: 405 mmGreen cutting height: 450 mmTable size: 615 x 615 mmTiltable table: 10/15 °Belt speed continuously up to: 250 m / min.Saw band size: 3640/3625 x 20/3 mmDrive power: 1.0 / 1.5 kWDimensions L x W x H: 1100 x 1000 x 2000 mmWeight approx: 470 kgWith- Bandsaw Welder Ideal BS 16- chip air compressor- Cutting device for band saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical bandsaw Fabr. Mössner type SSF 1050Machine -No: 25331 Year 1982xa0xa0xa0xa0xa0Technical specifications:Projection: 1050 mmCutting height: 550 mmRoll diameter: 500 mmHeight clearance table / band saw guide: 530 mmProjection in width over 2 rolls: 485 mm: over 3 rolls: 1050 mmSaw band length over 2 rolls: 3920 mm:: over 3 rolls: 5250 mmSaw band width :: 3 - 20 mmTable size (worktable): 750 x 1050 mmTable size (additional table): 450 x 450 mmTable tilt :: 2 u. 4 sided 15 inclinablestepless cutting speed: 15 - 940 m / min.Cutting speed overdrive: 2350 m / min.Max. Melting height: 15 mmDrive power: 4.0 kWWeight approx: 1740 kgExternal dimensions approx: 2100 x 1000 x 2100 mmWith- Band saw blade welder Ideal BS 25- scissors and grinding motor- Stepless saw blade speed via PIV control gearbox- Voltage indicator hydr.- Air pump- exchangeable aluminum castors with vulcanised hard rubber ...

Vertical metal band saw machine MÖSSNER type SM 420Masch. -No: 19357 Year of construction 1971Technical specifications:Roll diameter: 420 mmCutting height: 265 mmThroat: 410 mmSaw band length: 3150 - 3260 mmSaw band width: 3 - 16 mmTable size: 600 x 600 mmTable inclination: 30/15 °8 band saw speeds: 12 - 375 m / min.Table height: 1020 mmDrive power: 1.1 / 1.7 kWWeight: approx. 590 kgExternal dimensions approx: 980 x 870 x 1850 mmWith- Band saw welding machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

20-09-Edge Banding Machine WOODLAND MACHINERY (new) Price 7300 Eur. + VAT Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Initial heating of the workpiece by air Edge Milling Transport Dimensions Weight 600 kg

Vertical band saw and band filing machine make JAESPA type AS 4Fabr. -No: 735401, built in 1973Technical specifications:Roll diameter: 420 mmCutting height under guidance: 450 mmCutting width: 400 mmBelt speed: 16 - 1600 m / minSaw band length: 3200 - 3400 mmTable size: 660 x 660 mmTable load: 350 kgSaw motor: 2.2 kWGrinding motorExternal dimensions L x W x H: 660 x 900 x 1920 mmWeight: 690 kgwith- Band saw welding machine BSO-16- grindstone- tiltable table- Attack- lighting- Emergency stop switchused, from a company liquidation,in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

-Emassing 2m long; 1.3m wide; 1.1m high -400V; 50Hz; 10kVA; 35A -11.5KW Qvcdc9vbp -Pneumatics 6bar -grinding belt 300mm wide; 4088mm long; -Speed 15-30 m/s -ca 77 dbA -Wet grinding direction 0.24kW; 90l/min -Fuell quantity 115liter -Weight 250kg

Band saw of the Fa DoAll Dimensions 1.3m wide; 1.3m low; 2m High Work table area 850670mm max workpiece through-the-box approx. 300mm Pre-laying infinitely variable speed transmission Welding device with grinding stone for band saw blades Feed infinitely adjustable; Return without function

Vertical band saw machine make MÖSSNER type Rekord SM/ 400Machine -No: 14464, built in 1965Technical specifications:Table size according to the manufacturer: 600 x 600 mmTable tiltable up to: 15°Projection: 400 mmCutting height: 260 mmRoll Diameter: 400mm6 cutting speeds: 12 - 750 m/minSaw band length: 2780 - 2980 mmDrive power approx.: 1.1 kW 380 VDimensions: 1000 x 750 x 1800mmWeight approx.: 340 kgWith- Band saw welding machine IDEAL type BSO 16 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

HABUSCH BANDSAEGE TYPE CY280N - 2 Snelheden - Dubbel vertek – Zaagdruk hydraulic regularbaar - Snelspanklem - Koeling - Automatic afslag – Zaagblad 2645 x 27 x 0.9 mm - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

HABUSCH BANDSAEGE TYPE CY210N - Variabele zaagsnelheid - Verstek – Zaagdruk hydraulic regularbaar - Snelspanklem - Koeling - Automatic afslag – Zaagblad 2080 x 27 x 0.9 mm - Noodstop - Documentatie DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Band saw with program preselection for saw length and quantities Manufacturer Meba Built in 2001 Type 407 Feeding roller conveyor Laxative roller conveyor

Vertical band saw machine make PEHAKA type SH 9 spec.Masch. -No: 276361390Technical specifications:Roll diameter: 900 mmCutting height (lower guide): 520 mmCutting width: 880 mmTable size without rear table: 850 x 900 mmBelt speed: 1650 m / minlarge sheet length: 6250 mmMotor power: 7.5 HPWeight approx: 1100 kgWith- Leadership under the table- Table adjustment by handwheel 5 ° left 45 ° to the right according to the scale, 1 ° division Clamping and releasing with a foot pedal- Scale with 0.1 ° division- auto-electr. Brake switch that automatically cuts the saw band when the machine is switched off. stops within 10 seconds- Blade tension indicator- Cut-off and miter ruler with degree scale can be swiveled awayusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would  ...

KARMETAL BANDSAEGE TYPE KMT 250 CRAFT DM - Traploos instelbare lintzaag snelheid - Dubbel verstek - Zaagdruk hydraulic regelbaar - Snelspanklem - Koeling - Automatic afslag - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Z-band, stainless steel frame height 2.80m length 3.20 m

Description: -Horizontal band saw Lantzmann BS910E Premium (electric motor) -Cutting speed control -Cutting size adjustment -Strong and strong rail system -Powerful engines for larger logs -Electronic height adjustment (EAR) -Tension indicator (strain gauge) -4.8 m cutting length as standard -40mm wide saw band Options: -GX630 Honda engine with electric starter -2m rail -Carbide saw band Technical specifications: Engine: Electric motor 11 kW Power: 400V / 50Hz / 3 phases Cutting diameter: 910 mm Cutting length: 4800 mm Frame: 4 parts Saw blade size: 4576x40x0.9 mm (Carbide, 208 teeth) Standard rail size: 6000x1010 mm Safe cutting speed: 20 - 30 s / m Tooth spacing: 22 mm (0.86 ") Saw blade wheel diameter: 508 mm (20 ") Automatic saw blade lubrication: No. Adjustable blade guide: Yes Log mounting bracket: Yes Package size: 2080x750x950 mm Weight: 761/821 ...

Available in two versions - single-phase and three-phase The construction is made entirely of stainless steel AISI -304 construction Easy operation process. A safety system where the belt stops working in an emergency. ON – OFF switch on a button Security system when opening the door Easy cleaning with water pressure CE certified machine Supplied with a set of strips, and on order, strips for frozen and chilled meat are supplied. Technical data: Wheel diameter 200 mm. Motor power 0.75 kW, 230 /400V, three-phase Equipped with a special plate for adjusting the thickness of the pieces and a piston Tape length: 1,600 mm. Machine weight 57 kg.

Manufacturer: Medoc The machine is made of sturdy 18/10 stainless steel construction; Suitable for working in harsh conditions; Floor model; Automatic preset control to fix the work bar; The model has a fixed top, as an option it is offered – with a removable top; Model for right-handed operation; Equipped with a special plate for adjusting the thickness of the pieces and a piston; Easy cleaning with pressurized water. Belt width: 2500 mm.; diameter – 300 mm.; Security system where the tape stops at the 4th second. ON – OFF activation of a button in the event of an emergency Design with smooth surfaces, where the machine is easy and quick to clean. Certified machine meeting CE norms. Technical data: Wheel diameter: 300 mm. Motor power: 3 HP, 230 / 400V, three-phase Tape length: 2,500 mm. Machine dimensions: 325 / 745 /1670 m ...

Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg

Contact belt grinding machine - Width: 100cm - Depth: 50cm - Height: 200cm - 1 kW - 1400 rpm Good condition fully functional can be visited and tried out on site. Shipping abroad. Bjb9nyul9y Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.