mobil band used for sale

Labeling/banderole machine, New 1998. Machine has listed all the bearings, following a review. Very good condition. Yield approx. 20.000 pcs / h. Machine glueds: main label, counter label, little tie and a banderole. Manufacturer's documentation.

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Factory new with dust extraction automatic belt centering Tool-less change of the sanding belt Sanding belt 60 grit 2000 x 75 mm Band width 150 mm Plan grinding range 500 mm Belt speed 15 / 30 m / s Weight 120 kg Motor pole change-over bar 2.2 / 3,75 kW Suction motor 0.37 kW Machine dimensions 950 x 430 x 1050 mm Lieferumpfang: incl. belt 60 grit Connection cable with CEE plug 16 A Dust bag 1 year warranty including packaging and transport in Germany

MBSM 75-200-2 Metal band grinding machine Quick clamping system Grinding width 75 mm Speed: 14.5 and 29 m/s Belt: 75 x 2000 mm Engine: 400 V 50 Hz 1.5 / 2.2 kW Suction nozzle diameter 100 mm Weight 72 kg G & pieces 3922075

Pester Straff-banding machine type Pewo mat 450SN Bundle Packers pester PEWO-Pack 450 SN Stretchwrapper -Modified in 2016. -Memorized (max. mm): - Insert length 300, - rack width 540, - rack 250, - seal width 450, - power: 24 cycles/min. -With shrink tunnel PEWO-therm II, passage height 130 mm, machine is with new hardware and software Mitsubishi operation via touch panel and new paint in silver offers. Infeed conveyor with Stacker in the direction of the production flow with 90 ° high thrust

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

Bandsaw with feeding system. machine old but in very good condition complete with electrical cabinet. One roller as spare.

Fully automatic shrink machine for containers BVM 6030 W banding machine About 3000 mm length infeed conveyor- Adding links Shrink tunnel SC 6030 with steel net mesh bracelet band-width 600 mm - clearance of 300 mm heated zone 1000 mm All in very good condition The machine can be visited at any time! Individual prices: Products - 4.800,00 Shrink tunnels - 2800.00 Infeed conveyor - 1.500,00

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Very well maintained canters Quadro group Super 40 by Söderhamns/LFS. Indent with centering type MTG with chipping 240/12 Söderhamns, ventilation with 7 centring rollers and 4 x band saw AKE type Super 40 with roll diameter 1,400 mm. All linear axes with new servo cylinders type NOBEL. Machine until December 2016 in use. Super opportunity! Machines in very clean condition!

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of delivery: -Band saw blade -Work piece stop -Base -Quick cla ...

BEKA-MAK BANDSAW TYPE BMSY-230 DGH -Half car mate -Hydraulic -2 Snelheden -Verstek Dubbel -Instelbaar Zaagdruk hydraulic -Koeling -Zaagblad 2730 x 27 x 0,9 mm -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

ADAL BANDSAW TYPE HB 250 C. -2 Snelheden -Verstek Dubbel -Zaagdruk hydraulic regelbaar -Snelspanklem -Koeling -Afslag automatic -Zaagblad 2915 x 0.9 x 27 mm -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Carrying ability: max. 2,000 kg. Coil Inner Drm. max. 1,000 mm Coil Outdoor Drm. max. 1,200 mm Coil Width: max. 500 mm; ready for use

Vertical band aege KOeLLE ST105, table 950/900 mm, v= 15 - 2300 m/min - table must be overhauled - see pictures

Sollas SB250 stretchbander for cartons with 1000mm x 150mm (L x W) exit conveyor, output up to 25 packs per minute. Carton size range min. 60 x 35 x 10 mm (LxWxH), max. 400 x 450 x 200 mm Foil width 100 to 250mm Foil roll diameter max. 280mm Compressed air 4-6 bar

Cell with robot KAWASAKI RS005L A + band saw Year of construction / robot: 2010 Control: CNC 6-axis Max arm range: 903 mm Max load capacity: 5 kg Country of origin: Japan

BAND SAW 260 G-TYPE BS -2 Snelheden -Ver STeK -Zaagdruk hydraulic regelbaar -Snelspanklem -Koeling -Afslag automatic -Zaagblad 2455 x 0.9 x 27 mm -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Manufacturer _ BONGIOANNI Model_ 1300 Features_ ARTIGLIO Carriage with 5 hydraulic clamping; Hydraulic Advancing; Chain Loading at 4 ways with hydraulic arms; Unloading Rollers System; Reverse Feeding Chain; Grinder manufactured by Vollmer.

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

Technical data: -Cutting capacity 90 ° round 420 mm square 420 x 420 mm -Band saw blade dimensions 6300 x 41 x 1,3 mm -Cutting speed infinitely adjustable 0 x 130 m / min -hydr. Lifting - lowering of the column-guided saw frame - cut pressure infinitely adjustable 0-10 m / min -Hydr. movable work piece vise -biggest opening of Vice 480 mm -maximum passage height under the blade 480 mm -Material height approx. 700 mm -Total power 400 V / 8 kW -Hydr. Bundle clamping device -Coolant system -MOT. Spaeneraumbuerste -MOT. Chip conveyor - MOT feed roller 2000 mm -Space requirement approx. B 2200 x H 2500 / 2800 X 3200 mm -Weight approx. 3200 kg