mobil band used for sale

Sawing capacity: 280 mm round / 330 mm square Sawing capacity 45º: 250 mm round / 250 mm square Sawing speed: 40/80 mtr.min. Band saw blade: 3,320 x 27 x 0.9 mm Saw angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

dimensions of saw-band: 3650x27x0,9 mm speed: 15-100 m/min vice: 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1.105 kg dimensions: 2700x2300x1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic- ...

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Set-top model Complete stainless steel body and working table Adjustable blade tensioner Caver safety switch Cover safety saw Length is adjustable thanks to the standard joinery System cutting thickness property Maintenance-free compact design Machine dimensions in cm: Length: 100 Width: 90 Height: 190 Electric power: 2.5kW

width of the strips: 75 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4,1 HP weight of the machine ca.: 75 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 315 mm cutting capacity - round: 100/ 90° mm cutting capacity - square: 90 x 90 /90° mm cutting capacity - flat: 85 x 110 / 90° mm cutting capacity - flat: 85 x 85 / 45° mm cutting capacity - round: 100 / 45° mm cutting capacity - square: 85 x 110 /45° mm saw blade turning speeds: 25 / 50 U/min voltage: 400 V / 50 Hz Motor output: 1 kW machine weight ab.: 240 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Professional bone saw Kolbe K330 is designed for fast, precise and safe cutting of fresh and frozen meat, bones and larger product pieces in butcher shops, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require strong performance, reliable operation and high cutting quality in daily professional use. The saw provides fast and even cutting thanks to the high blade speed of 22 m/s, ensuring efficient work and precise cuts. It is suitable for processing bones, carcass sections, large meat pieces and frozen products. Model K330 is equipped with 300 mm wheel diameter and uses a 2490 mm blade, providing stable operation, accurate blade guidance and excellent cutting results. Maximum cutting height is 320 mm, while cutting width is 280 mm. The construction is largely made of stainless steel, ensuring long service life, high hygiene st ...

saw-blade dia.: 370 mm cutting capacity - round: 115/ 90° mm cutting capacity - square: 110 x 110 /90° mm cutting capacity - flat: 110 x 110 / 90° mm cutting capacity - flat: 100 x 100 / 45° mm cutting capacity - round: 115 / 45° mm cutting capacity - square: 100 x 100 /45° mm saw blade turning speeds: 22 / 44 U/min voltage: 400 V / 50 Hz Motor output: 3 kW machine weight ab.: 270 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2-roller banding machine drinking flax ZW 400; cleaned and tested; Working width 400mm; Glue basin height adjustable; suitable for cold glue; 2 pcs. in stock. Two rollers gluing machine potions ZW 400; cleaned and checked; working width 400mm; glue reservoir adjustable in hight; used for cold glue; two machines on stock.

PILOUS ARG-300F metal band saw was built in 2024 in the Czech Republic by PILOUS-pásové pily, spol. s r.o. The machine is in perfect technical condition, practically unused – only a few test cuts were performed on it. The PILOUS ARG-300F is an extremely versatile machine designed for both industrial plants and professional workshops. It is ideal for precise cutting of workpieces made of, among others, stainless steel and tool steel at an angle of 90°, +45° and +60°. Cutting is performed by means of a reliable saw blade, driven by a powerful electric motor with worm gearbox. The cutting speed is adjustable in a range from 15 to 90 m/min with the use of an inverter. Stable clamping of the workpiece, on the other hand, is ensured by a massive quick-clamping vise. The machine’s design is based on a robust arm made of high-quality grey cast iron. This solution guarantees high r ...

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

2 roller banding machine Hunkler LAM 600; good condition; cleaned and tested; Working width 600mm; Linen pool height adjustable; suitable for cold glue. Two rollers gluing machine Hunkeler LAM 600; good condition; cleaned and checked; working widht 600mm; glue reservoir adjustable in hight; used for cold glue.

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

Band length: min. 3200mm, max. 3400mm With welding machine

MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning

MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning

Description: FRIGGI Band Saw 2MF650 ACN Details: Type 2MF650 ACN Serial number 2511 Year of construction 1997

Sollas SB 380 stretchbanding machine, pack size min. 50 x 15 x 20 mm (LxWxH), max. 210 x 250 x 150 mm (LxWxH), capacity up to 30 single or bundle packs per minute.

FELDER Woodworking 5-in-1 Combination Machine BF6-41 Circular Saw-Milling Machine-Planer-Moulding Machine Type: BF6-41 200 cm Aluminum Sliding Table Outrigger Table with Miter and Crosscut Fence Manual Blade Height Adjustment Manual Blade Tilt up to 45° Rip Fence up to 195 cm Parallelogram Guard with Fold-Away Dust Extraction Hood Main Motor Power: 4 kW Swivel Table Router Router Fence with Fine Adjustment Height and Tilt Adjustment via Handwheel 3 Adjustable Speeds Milling spindle diameter 30 mm Removable milling spindle Motor power 4 kW Surface planer/thicknesser Planing width 40 cm Thicknessing capacity 4-220 mm 2-knife Felder system cutterhead Infinitely variable feed speed 4-14 m/min Central dust extraction hood for surface and thickness planing Swivel fence Mortising attachment Removable mortising attachme ...

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - No. 3 cnc axis - Cutting section 1300x800 h 100 mm - Angle of cut 90°+/- - Wheels diameter 900 mm -Volt. 380/50 - S/W 06 - CE rules (year 1998)

MEP Shark 282 CCS Band Saw 3-speed 400V, 2-stage motor, runs smoothly. Infinitely variable speed from 0 to 72 RPM. Miter cuts possible from -45 to +60 degrees. CCS (Cut Control System) hydraulic lowering aid. Saw blade pressure gauge. Year of manufacture: 2005 Made in Italy. Maximum cutting capacity round: 250 mm Maximum cutting capacity square: 220 mm Maximum clamping opening: 285 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Coolant pump with filter in the base cabinet. Machine dimensions: 125 x 70 x 190 cm Infeed conveyor dimensions: 200 x 53 x 90 cm Includes accessories as shown in the pictures.

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 0.4 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Sumbel Perkeo 90; good condition; cleaned and tested; Working width 90mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; good condition; cleaned and checked; working width 90mm; one scooter; used for cold glue.

Specifications: - Sanding belt dimensions approx. 50 x 2500 mm - Contact wheel diameter approx. 250 mm - Drive 400 V / 5.5 kW - Space requirement approx. W 1350 x H 2050 x D 900 mm - Weight approx. 200 kg

Specifications: - Polishing wheels - grinding wheel dimensions approx. 300 x 40 x 76 mm - Sanding belt dimensions approx. 3500 x 50 mm - Contact wheel dimensions 400 x 50 mm - Drive speed 1450 rpm - Drive 400 V / 1.8 kW - Space requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg

Banderolier Busch TB 39-30; good condition; cleaned and tested; Strap width 30mm; frame 390x200mm; large-roll magazine; suitable for paper and foil. Banding machine Busch TB 39-30; good condition; cleaned and checked; band width 30mm; frame 390x200mm; Big Size Roll Magazine; used for paper or foil.

Bundle clamping device manual

SILOMA OL 420A NC metal band saw was built in 2018 in Bulgaria by SILOMA JSC. The machine is designed for precision cutting of workpieces with round, square and rectangular cross-sections at 90° angle. It also enables bundle cutting, i.e. the simultaneous machining of several workpieces in one working cycle. This makes the SILOMA OL 420A NC the perfect choice for professional production plants specialised in series and mass production. Cutting is performed by a reliable saw blade, driven by a powerful electric motor. The cutting speed is adjustable in the range from 15 to 100 m/min. All operating parameters are programmed in the intuitive NC controller with touchscreen display, which facilitates operation, provides access to key information and allows quick programming of work cycles. The SILOMA OL 420 A NC band saw weighs 2500 kg. Technical specifications of the SILOMA OL 420A NC ...

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

cutting diameter: 355 mm dimensions of saw-band: 3770 x 34 x 1,1 mm cutting speed: 20 - 80 m/min cutting width: 490 x 280 mm : 290 mm Impact energy: 250 mm : 230 mm : 180 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions: 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

unfortunately there are no detais for this facility. Cold strip driven by a chain system.

Refrigeration system in two versions! You can purchase both or individually. Year of construction :2005 Power : 51,8kW Voltage : 400V 50Hz For further information, please refer to the type plate.

Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

BOMAR Ergonomic 320.250 G metal band saw was built in 2011 in the Czech Republic by BOMAR, spol. s r.o. The machine is designed for precise cutting of workpieces at an angle of 0°, +45° and +60°. The machining is performed by a robust saw blade driven by an electric motor with worm gear, which operates in an oil bath. In order to ensure precise guidance of the saw blade, it is mounted in tapered roller bearings with pre-clamping. Secure clamping of the workpiece during cutting is ensured, in turn, by a quick-clamping vice. The BOMAR Ergonomic 320.250 G is distinguished by its extremely stable design based on a robust arm, which is raised manually and lowered under its own weight. The arm’s descending speed is adjustable via a hydraulic cylinder with flow valve. The combination of high cutting precision with simple operation and reliable components makes the Ergonomic 320.250 G ba ...