We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,591 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Table height: 850mm, cutting width/ height: 1200/ 850mm, saw band length: 7050mm, saw band thickness: 0.5mm, weight: 500kg.
used
Welding bar length: 760mm, product dimensions: 110-630x25-410x5-380mm, tunnel opening: 850x450mm, length: 2980mm, width: 1243mm, height: 2315mm, weight: 640kg.
new
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Furnishing: - manual band saw machine + with both. Miter device right 45 ° / left 60 ° - adjustable via large turntable - Selector switch for switching between manual and controlled lowering - autom. Limit switch-off - either manual or autom. Lowering the saw bow - Required instructions - saw band - coolant device - Angle stop - Chip removal brush - Op ...
used
Output: 140 pallets/h, with safety enclosure, without pallet conveyor, including, documentation.
used
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
used
I sell a belt conveyor suitable for industry, for example in the wood industry or material manipulation etc. Length of together 4,20m Bandwidth 650mm Thrust with electric motor 0.37kW / 0.55HP Fully operational. Available the same.
used
Technical specifications: Year of issue - 1 979 Conveyor width, 250 mm Cutting height, 100 mm Main engine, kW 50 Engine power, 1.5 kW Speed of rotation of a saw shaft, rpm 4600 Max. diameter of a saw disk, mm 340 Landing diameter, 70 mm Weight, 2500 kg
used
Description Mossner Record vert. Band saw. The welding machine is defective! Specifications Manufacturer Mossner-Rekord Model SSF-420 Use State
used
Robinson Heavy Saw 36" diameter wheels 3" Blade (75mm ) 11 kW/ 15HP engine Driven feed Central lubrication system Quickly adjustable pressure saw guides low stop , tilt adjustable Quickly adjustable pressure saw guides low roller stop / tiltable infinitely variable feed speed
new
cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...
new
cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feed ...
used
Technical data Cut range: round up to: 340 mm Square: 340 x 340 mm Execution: Horizontal hydraulic Cutting speed: stepless from: 15 m/min up to: 100 m/min Miter cuts: Table inclination right side: +45 ° Table incline left: -45 ° Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 3100 mm Width: 1100 mm Height: 1700 mm Various accessories: Hydraulic vice Coolant system Chip conveyor
used
Technical data Cut range: round up to: 100 mm Band length: 1730 mm Voltage 50 Hz 3x: 220 Volt Power: 0.2 kW
used
Technical data Execution: Double sided grinding wheel Grinding wheel: Diameter: 150 mm Width: 15 / 40 mm Bore: 12.7 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 250 mm Height: 300 mm
Band width: 0 mm Motor power: 0 HP/kW CNC Brand: _Unknown / Other Open face pneumatic lift version 3 lapping rings Wide variety: semiconductors, electro-optics, ceramic, metal 1000 mm serrates lapping plate Power 5,5 kW Length:2.400 mm Width:2.200 mm Height:1.400 mm Weight:3.900 kg
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id 5404 MAKE Jaespa Germany TYPE W 260 G YOP 1994 DIMENSIONS Length 2200 mm Width 2150 mm Height 1300 mm
used
Height under guides: 420 mm Throat: 420 mm Table length: 0 mm Table width: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Vertical bandsaw Cutting capacity 90 ˚ Ø420 mm Cutting speed M/min 18 - 2280 M/min
used
cutting range: max. 371 x 371 mm feed:: 800 mm 8-fach weight of the machine ca.: 5 t : : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity round maximum diameter: 1780 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat bandsaw Angle L / R Degrees 90 gr Cutting capacity 90 ˚ Ø 1780 mm Cuttting capacity 90 ˚ Flatt 1780 x 1780 mm Max. cutting length 450 mm
used
Height under guides: 0 mm Throat: 320 mm Table length: 0 mm Table width: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat AutomatAngle L / R Degrees 30 - 90 Gr Cutting capacity 90 ˚ Ø 320 mm Cuttting capacity 90 ˚ Flatt 460 x 300 mm Cutting capacity 45˚ Ø 300 mm Cuttting capacity 45 ˚ Flatt 300 x 300 mm blade dimensions 4120 x 27 mm Cutting speed M/min 17 - 110 M/min
used
Height under guides: 315 mm Throat: 0 mm Table length: 0 mm Table width: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Hack saw Angle L / R Degrees L + R 90 / 45 Gr. Cutting capacity 90 ˚ Ø 315 mm Cuttting capacity 90 ˚ Flatt 315 x 200 mm Cutting capacity 45˚ Ø 200 mm Cuttting capacity 45 ˚ Flatt 200 x 300 mm blade dimensions 450 x 45 x 2 mm Cutting speed M/min 15 / 30 M/min
used
Capacity round maximum diameter: 260 mm Angle degrees maximum: 400 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Bandsaw Angle L / R Degrees L + R Cutting capacity 90 ˚ Ø260 mm Cuttting capacity 90 ˚ Flatt 260 x 400 mm mm
used
Capacity round maximum diameter: 550 mm Angle degrees maximum: 1000 Capacity square: 5 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Make Sabi 1000 x 55 Type PBR 550 / 1000 Year 2002 Semi automatic bandsaw Capacity round max. diam.550 Angle degrees max.Cap 1000 x 550 Type machine: Vert./Hor. 45 Gr = 650 x 520 Workpiece height (mm) Speed 15 - 105 M Workpiece width (mm) Power 7.5 kW Capacity rectangle (mm) Hydr. blade tension Capacity square (mm) 5 Gr inc. blade 4.5 x 2 x 2.6 Mtr Weight 6000 Kg New Euro 80.000
used
Specifications: - Table size 2300 x 800 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 3700 x H 1400 x D 1600 mm - Weight approx. 600 kg
used
Edge banding machine Sumbel Perkeo 60; good condition; cleaned and tested; Working width 60mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 60; good condition; cleaned and checked; working width 60mm; one roller; used for cold glue.
used
Automatic band saw Fully automatic machine Price on request!
used
- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg
new
dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...
used
2 pieces of used 2-band prints for pipes up to 70 mm Manufacturer: Ankele Type: BAP 350-70-1A Year of construction: 2018 mechanical speed: 40 m/min. Condition: ready for operation
used
Capacity round maximum diameter: 90 mm Angle degrees maximum: 290 Capacity square: 290 mm Workpiece height: 34 mm Workpiece width: 11 mm Capacity rectangle: 290 mm easy intuitive touchscreen panel clear Mitre cutting angle scale Double Mitre cutting L + R Working height vice 795 mm Coolant tank 35 L with bronze nozzle Capacity 90°400 ° Cutting flat 90°460 x 300 mm Capacity L 45°290 ° Cutting 45°300 x 200 Cutting speed Vario15 - 90 Circle blade size4300 x 34 x 1,1 mm Power3 kW
new
cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 30 - 75 m/min connected load frequency: 230 V capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm total power requirement: 2,35 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...
new
Guide profile for slat-band conveyors per m, Versaflex, A06P-3, 65mm, MK, mint condition -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Guide profile, guide rail 65mm wide, 4 pieces 300cm long, 4 pieces 131cm long, 4 pieces 235cm long Material aluminum Incl sliding strips ASL-25-0 HDPE black As good as new! The part was installed in a new plant, which was not put into operation, has minor signs of storage or installation, but is in mint condition. We have the following individual parts for Versaflex hinge conveyors from MK Group in stock: (Please contact me) - Deflection units A06EM, 65mm wide - Guide profile A06P-3, 65mm wide incl. glide bars - Link chain, smooth chain white, A06CH ...
new
Smooth chain for slat-band conveyors per m, Versaflex, A06CH, 63mm, MK, mint condition -40% Smooth chain, link chain, white, 63mm wide, Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The part was installed in a new plant, which was not put into operation, has minor signs of storage or installation, but is in mint condition. We have the following individual parts for Versaflex hinge conveyors from MK Group in stock: (Please contact me) - Deflection units A06EM, 65mm wide - Guide profile A06P-3, 65mm wide incl. glide bars - Link chain, smooth chain white, A06CH, 63mm, - Drive units with gear motors Functional guarantee! We cannot provide a conventional guarantee and warr ...
used
Column-guided automatic band saw Fabr. RES Type 260 EuropeYear of construction unfortunately not visibleCutting area: 260 mmSaw band size: 4100 x 36 x 1.3 mmDrive power: 5.5 kWExternal dimensions L x W x H: 1600 x 2000 x 2000 mmWeight about: 2 twithout control, it would have to be installed a new controlSpecial price - usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Column-guided horizontal automatic band saw make KASTO type HBA 340 AUTechnical specifications:Cutting diameter: 340 mmCutting area 90 °: 340 x 380 mmSaw band length: 5334 x 32 x 1.06 mmTable height: 700 mmSpeed range: 20 - 130 m / min.Drive power: 11 kWWeight approx: 2.1 tDimensions approx .: 2200 x 2600 x 2000 mmWith- chip conveyorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical metal band saw make HESKA type ESA 4Fabr. -No: 1070178 Year 1978Roll diameter: 420 mmCutting width: 400 mmCutting height: 280 mmTable size: 500 x 500 mmBand saw speed: 15 - 1500 m / minDrive power: 1.5 kWWith- Band welding unit IDEAL type BSO 16 No. 176034used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vert. Metal band saw Fabr. SELECT Type SB 4Machine -No: 7302029 Year 1973Roll diameter: 420 mmCutting height: 320 mmCutting width: 400 mmTable size: 500 x 500 mmCutting speed: 15 - 260 m / min.Saw band size: 3400 x 3/20 mmDrive power: 1.1 / 1.5 hpWeight approx: 400 kgOutside dimensions approx: 1200 x 700 x 2000 mmWith- Band saw butt welder Ideal- Separator- stepless speeds- Tape speed indicatorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vert. Band saw for metal make KÖLLE type R 40Machine -No: 44Technical specifications:Roll diameter: 400 mmProjection: 390 mmStepless belt speed: 16 - 2200 m / min.Cutting height: 300 mmTable size: 600 x 560 mmWeight approx: 450 kgExternal dimensions approx .: 1000 x 750 x 2000 mmWith- Bandsaw butt welder Ideal BS 016- grindstone- Scissorsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical band saw machine MÖSSNER type SSF 500Machine -No: 10077 built in 1961Technical specifications:Roll diameter: 500mmProjection: 485 mmTable size: 600 x 700 mmTable swivelling:+/- 15°Drive power: 2.0 kWWeight approx.: 800 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical Band Saw Machine make PEHAKA type SLA 8Machine -No: 31540 30211for non-ferrous metals, wood, plasticRoll diameter: 800 mmDischarge: 760 mmCutting height approx: 490 mmTable size: 790 x 815 mmBelt speed: 1200 m / mingr. Blade length: 5950 - 6200 mmBandwidth: 12 - 25 mmMotor power: 5.5 kWWeight approx: 900 kgOutside dimensions approx: 900 x 1900 x 2720 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Wood band saw make CENTAURO type 600 COMachine -No: 5800 Year 1998Roll diameter: 600 mmProjection: 580 mmMax. Cutting height: 260 mmTable size: 600 x 860 mmDrive power: 3.0 kWOutside dimensions approx: 1250 x 650 x 2200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
Description: -Horizontal band saw Lantzmann BS660E (electric) -Tension indicator (strain gauge) Options: -Additional rail, 2m -Saw band tensioner Technical data: Motor: electric motor, 5.5 kW Power: 400V, 50HZ, 3-phase Cutting diameter: 660 mm Cutting length (standard): 2794 mm Frame: 4 parts Standard rail size: 4000x900 mm Package dimensions: 2080x610x810mm Safe sawing speed: 13-15 s / m Blade speed: 17 m / min Tooth spacing: 22 mm (0.86 ") Saw blade size: 3690x34x0.9 mm Saw blade wheel diameter: 480 mm (18.8 ") Dimensions: 4064x1778x1800 mm Weight: 352/380 kg -This machine is available right away. -For shipping information contact us directly.
new
Description: -Horizontal band saw Lantzmann BS790E (electric) -Comes with saw band tensioner Options: -Additional rail, 2m -Saw band tensioner Technical specifications: Motor: electric motor 7.5 kW Power: 400V, 50HZ, 3-phase Cutting diameter: 790 mm Cutting length (standard): 2794 mm Frame: 4 parts Standard rail size: 4000x1030 mm Package dimensions: 2150 x610x810mm Safe sawing speed: 13-15 s / m Blade speed: 17 m / min Tooth spacing: 22 mm (0.86 ") Saw blade size: 3960x34x0.9 mm Saw blade wheel diameter: 480 mm (18.8 ") Dimensions: 4064x1778x1800 mm Weight: 352/380 kg -This machine is available right away. -For shipping information contact us directly.
new
Description: -Horizontal band saw Lantzmann BS660G with petrol engine -Stress indicator (strain gauge) Options: -Additional rail, 2m -Saw band tensioner Technical specifications: Engine: petrol, 9 HP (LIFAN, manual starter) Power: 301cc Cutting diameter: 660 mm Cutting length (standard): 2794 mm Frame: 4 parts Standard rail size: 4000x900 mm Package dimensions: 2080x570x830 mm Safe sawing speed: 13-15 s / m Blade speed: 17 m / min Tooth Distance: 22 mm (0.86 inches) The size of the saw blade: 3690x34x0.9 mm Saw Blade Wheel Diameter: 480 mm (18.8 inches) Dimensions: 4064x1778x1800 mm Weight: 315/355 kg -This machine is available right away. -For shipping information contact us directly.
new
Description: -Horizontal band saw Lantzmann BS790G (petrol) -Comes with saw band tensioner -Tension indicator (strain gauge) Options: -Additional rail, 2m -Saw band tensioner Technical specifications: Engine: petrol, 15 HP (LIFAN, manual starter) Power: 420cc Cutting diameter: 790 mm Cutting length (standard): 2794 mm Frame: 4 parts Standard rail size: 4000x1030 mm Package dimensions: 2150 x570x830mm Safe sawing speed: 13-15 s / m Blade speed: 17 m / min Tooth spacing: 22 mm (0.86 ") Saw blade size: 3960x34x0.9 mm Saw blade wheel diameter: 480 mm (18.8 ") Dimensions: 4064x1778x1800 mm Weight: 315/355 kg -This machine is available right away. -For shipping information contact us directly.
new
Description: -Horizontal band saw Lantzmann BS910G PRO (Petrol motor) -Cutting speed control -Cutting size adjustment -Strong and strong rail system -Powerful engines for larger logs -Electronic height adjustment (EAR) -Tension indicator (strain gauge) -4.8 m cutting length as standard -40mm wide saw band Options: -2m rail -Carbide saw band Technical specifications: Engine: Petrol 27 HP (LONCIN, electric starter) Power: 764 cc Cutting diameter: 910 mm Cutting length: 4800 mm Frame: 4 parts Saw blade size: 4576x40x0.9 mm (Carbide, 208 teeth) Standard rail size: 6000x1010 mm Safe cutting speed: 20 - 30 s / m Tooth spacing: 22 mm (0.86 ") Saw blade wheel diameter: 508 mm (20 ") Automatic saw blade lubrication: Yes Adjustable blade guide: Yes Log mounting bracket: Yes Package size: 1080x750x1050 mm Weight: 722/782 kg -This machine is available right away. ...