We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,590 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
A.E.W. Engineering bandsaw, model: 400, type: MK-11, serial number: LH-164 188, 415 V, 3 Ph, 6.2 A, dimensions table: 1040 mm x 900 mm, total dimensions: 1040 mm x 1070 mm x 1900 mm.
used
Machine type: Vertical metal band saw machine Manufacturer: INTERKONT Model: Select SB-4 Year of construction: 1990 Condition: very good Offer type: used machine Specifications: Cutting height: 305/270 mm Projection: 405 mm Drive type: el./mech. Drive: 0.75/1.1 kW Remark: butt welding device, infinitely variable belt speed, swivelling saw table 500 x 500 mm Weight: 450 kg The machine is in a very good and immediately ready for use condition and can be visited and demonstrated at any time. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.
new
dimensions of saw-band: 2950x27x0,9 mm : 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm output: 1,5 / 1,8 kW Weight: 440 kg dimensions: 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 280x200 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: square: 180 mm capacity 45 degrees: flat: 180x180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 110x110 mm dimensions of saw-band: 2950 x 27 x 0,9 mm output: 1,5 / 1,8 kW Weight: 435 kg dimensions: 1700x1000x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
material dimensions max. round: Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg
used
Semi-automatic with miter Saw blade size 3830x27x0.9 mm Cutting speed 15-100 m/min. Cutting capacity at 90 degrees 305 mm / 360×305 mm Cutting capacity at 45 degrees 265 mm / 265×300 mm Cutting capacity at 30 degrees 175 mm / 175×300 mm
used
total power requirement:380V 50 HZ,1,67 kW dimensions of the machine ca.:1,4 x 1,8 x 1,4 m
used
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
used
cutting diameter:520 mm saw band length:7239 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min cutting width at rectangle material:520 mm total power requirement:9,5 kW weight of the machine ca.:3,8 t Machine with multi feed device chip conveyor infeed roller stand
used
Equipped with material clamp, pneumatic lifting + lowering, including various spare saw belts
used
used
used
used
used
220/380 V; 5.4/3.2 A; Cutting height: 430 mm; ATTENTION: without lattice boxes and without pallets (pallet exchange is possible)
used
used
This lot has been tested for function.
used
You are responsible for dismantling and transporting this lot. There are no tools available.
used
used
incl. roller stand
used
Band saw; wheel diameter 1400, wheel width 135mm, maximum saw opening 750mm, frequency regulator for cutting speed/feed speed, discharge belt rear saw 500x3300mm motor power 1.5kw, motor power 37kw, connection 200mm: clamping truck; length 6750mm, equipped with 3 electrically operated arms, with computer cutting thickness, transport size 6750x1700x2250mm; Rails and accessories total length 15 mtr in 3 segments, motor power drive 5.5 kW. Please note! Lot has already been dismantled
used
Including: 2x roller conveyor, width 55 cm, 1x 195 cm, 1x 600 cm - 2x roller conveyor, width 84 cm, length 440 cm
used
Specifications Manufacturer CAM Model ASB38 Cellophane wraper bander and TRM HEAT TUNNEL Year 2005 Condition Used
used
There are three identical machines available, connected load: 0.25/0.37kW, weight: 250kg.
used
Saw band dimensions: 3000x20x0.9mm, connected load: 0.55kW.
used
Cutting range round/ rectangular: 180/ 180x300mm, saw blade speed: 22-65m/min, saw blade dimensions: 2362x20x0.9mm.
used
Cutting speed: 10-1200m/min, power: 2.3kW.
used
Cutting range: 320/ 320x320mm, saw band dimensions: 3660x27x0.9mm, weight: 1.95t.
used
Cutting range: 90° round: 210mm, 90° square: 200x200mm, 90° flat: 270x200mm,45° round: 180mm, 45° square: 180x180mm, 45° flat: 180x190mm.
used
Saw band dimensions: 34x11mm, max. pipe wall thickness: 40mm, cutting speed: 50-150m/min, pipe diameter: 160-1000mm, weight: 4.5t.
used
Max. cutting diameter: 250mm.
used
There are three metal band saws available, connected load: 1.1kW, weight: 170kg.
used
Cutting range round/ square: 400mm, cutting speed: 12-100m/min.
used
Band width: 0 mm Motor power: 0 HP/kW CNC Brand: 0 CNC Model: 0
used
Band dimensions: 2625x20mm.
used
Length: 2200mm, width: 1200mm, height: 535mm, weight: 385kg.
used
With documentation, without accessories or documentation, has been regularly serviced, an on-site inspection is possible, video is available.
used
Connected load: 2kVA, an inspection is possible.
used
Cutting dimensions: 500x320mm, connected load: 2.2kW, length: 3550mm, width: 2000mm, height: 2110mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.
used
Band width: 0 mm Motor power: 0 HP/kW CNC Brand: 0 CNC Model: 0 Technical data Band length: 500 mm Band width: 50 mm
used
Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.
used
Cutting diameter: 260 mm, saw band length: 3660 x 27 x 0.9 mm, cutting width: 260 mm. Cutting speed: 15 - 105 m/min. Length: 1.8 m, width: 2 m. Machine weight: approx. 1.2 t. The control unit is defective - normal sawing is possible but no automatic material transport or automatic cutting to length. An on-site inspection is possible.
used
Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm (roller conveyor height). Documentation available. On-site inspection is possible.
used
Cutting diameter: 290mm, cutting width 320mm, saw blade length: 3100mm, saw blade dimensions X/Y/Z: 3100mm/27mm/0.9mm, miter cuts min./max.: -60°/+60°, cutting speed: 20m/min - 100m/min. Weight: approx. 570kg, dimensions X/Y/Z: approx. 1800mm/950mm/2100mm. An on-site inspection is possible.
used
Band width: 0 mm Motor power: 0 HP/kW CNC Brand: 0 CNC Model: 0
used
Diameter of the roll: approx. 420mm, projection in width: approx. 415mm, projection in height: approx. 265mm, table size: approx. 600x600mm, saw-band speed: 18-562m/min, 8 steps, saw band length min./max.: 3150/3260mm, table swivel in two axes.
used
Saw blade length/width: 8400mm/50mm. Documentation available. On-site inspection is possible.
used
Cutting capacity round: 360mm, cutting capacity square: 360mm/360mm, minimum remnant length: 80mm, saw blade dimensions: 5334mm/34mm/1.1mm, cutting speed: 20-130m/min, material feed: single stroke up to 600mm, work table height: 700mm. Dimensions X/Y/Z: 2600mm/2400mm/2000mm, weight: approx. 2500kg. Flywheel defective. Including chip conveyor Knoll 150 K-1. On-site inspection is possible.
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Band length: 3505 mm Band width: 25 mm Sheet thickness: 0.95 mm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 2000 mm Width: 1900 mm Height: 1400 mm
used
Saw band length: 5280mm.