mmw used for sale

Manual beading and flanging machine Fabr. BEUTNERMax. Sheet thickness approx: 1.25 mmRoller center distance: 63 mmProjection: 160 mmWeight: 23 kgWith- different rollsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Z-profiling machine make probably SCHECHTL / HEIDT type SZP 250Technical specifications:Working width: 2500 mmSheet thickness St.:0.5 - 1.5 mmSheet thickness VA:0.4 - 1.0 mmSheet thickness aluminium: 0.4 - 1.0 mmRoller distance: 160 mmNumber of profile rollers:15Profiling height: 3 - 7 mmThroughput speed: 20 m/min.Drive power: 2.0 kWWorking height: 890 mmApprox. weight: 880 kgExternal dimensions approx.: 3200 x 1040 x 1290 mmwith- Forward and reverse switch- support table- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal - folder former make RAS type 22.15Built in 1970Profile height max.:20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max .: 1.5 mmProfiling speed approx. 14 m / minPower requirement: 3 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx. 300 kgWith- Profile rolls for Pittsburg fold and standing seamused, from an operating resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.10Masch. -No: 353/4 built in 1982for sheet thickness up to: 1.5 mmProfiling speed: 6.0 and 12 m / min.Number of reel stations: 7Drive power: 2.2 / 3.4 kWWeight approx: 490 kgOutside dimensions approx : 2160 x 710 x 1010 mmWith- 2 set of profiling rolls- Footswitch- larger table with stopsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wide belt sanding, brush deburring and grinding machine make GRINDINGMASTERType MCSB / B2 1300 make -No: TN 1431-04 built in 1991Working width: 1300 mmBrush size: 1300 x 300 mmSanding belt size: 1900 x 330 mmMax. Material thickness: 150 mmPower of the contact roller: 16 kWPower of the stainless steel brushes with oscillating oscillation: 15 kWPerformance of the stainless steel brushes Mit- u. Counter-oscillation: 15 kWContinuous flow rate: 3 - 18 m / minAir requirement: 70 l / min / 6barDimensions L x W x H approx .: 2200 x 3000 x 2200 mmWeight approx. 2500 kgWith- 3 deburring stations- wet execution- Dryer- FilterfliesanlageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Universal folder former make RAS type 22.15Mash. -No: 163/2Profile height max.:20 mmSheet thickness max .: 1.5 mmDrive power: 2.2 kWExternal dimensions: 1140 x 790 x 1210 mmWeight approx. 300 kgWith- Set of rollers for Eckfalz with Falzöffnerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical wet belt grinding machine make MAFAC type V 100Masch. -No: 88174543 Year 1988Sanding belt dimensions: 20-100 x 3500 mmStand projection: 500 mmTable size: 650 x 650 mmWidth of the contact surface: 100 mmBelt speed through polswitchable motor: 12.5 m / sAir pressure: 5-6 barOscillation approx: 0 mmDrive motor 380 V: 21 kWWeight: 430 kgSpace required: 840 x 1180 x 1760 mmwith saucer approx: 2050 mm highWith- Compl. electr. Facility- belt oscillation- pneum. belt tension- Belt filter automat- sep. control cabinet:used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Standing seam, push and cam Machine make EWI type EW 40Fabr. -No: 167/247 built in 1986Height of standing seam up to: 40 mmMax. Material thickness: 1.5 mmDrive power: 1.5 kWPower connection: 380 V, 50 HzDimensions L x W x H: 450 x 250 x 310 mmWeight approx: 34 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC controlled belt grinder make TAGLIABUE type TT-3-1300Machine -No: E6 / 36886 Year 1996Max. Grinding belt width: 1300 mmMax. Passage: 1300 mmGrinding range: 4 - 350 mmcontinuous belt speed: 6 - 12 m / min.variable feed rate d. Conveyor belt: 5.0 - 25 m / min.Sanding belt size: 8500 x 150 mmSlat strip size: 6530 x 140 mm:Broadband feed table: 5000 x 1200 mmExtraction roller table: 4000 x 1400 mmAir consumption: 1400 l / min.Air extraction: 9000 m³ / hPower of the vacuum pump: 7.5 kWPower of the belt motor: 3.0 kWTotal installed capacity: 30 kWWeight approx: 6000 kgMachine width: 5000 mmWith- CNC control Fabr Syel- Vacuum material tension- Extraction and filtration system make Ticnomac, 13 kW, year 96very little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Er ...

Electric chain hoist make DEMAG type PK 5 N-FMasch. -No: 4122555 with fine strokeCapacity 1str.: 1000 kgCapacity 2str.: 2000 kgLifting height: 3 mSpeed 1str.: 8/2 m / mmSpeed 2str.: 4/1 m / mmWith- in 1str. execution- Chain basket:used, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Belt grinding machine GRIT GI 150 2H, switchableSerial -No: 1121152 Year 2011with surface grinding module GIL and radius grinding module GIRTechnical specifications:BELT SANDERBelt dimensions approx.: 150 x 2000 mmSpeed: 3450 rpm.Voltage: 3 x 400/440V 50/60HzWeight approx. 80.6 kgwith- Machine foot GIB Serial-No: 1120014 year of manufacture 2011 Weight approx. 17 kgSURFACE GRINDING MODULE GILSerial-No: 1114072 built in 2011Tape dimensions approx.: 150 x 2000 mmDimensions of profiles/flat material max.: 100 x 100 mmVoltage: 3 x 400V 50/60HzApprox. weight: 69 kgfor longitudinal grinding of square tubes, profiles and flat materialsRADIAL GRINDING MODULE GIRSerial-No: 1124121 year of manufacture 2011Band dimensions approx.: 150 x 2250 mmDimensions of profiles/flat material max.: 120 x 150 mmTubes up to diameter: 20 - 150 mmWeight approx. 109 kgwith- integrated depth stop for series usefor  ...

Center bore grinding machine make KLEIN type ZSS 1Machine -No: 15-76-369 built in 1977Technical specifications:Center height: 160 mmDistance between centers: 1000 mmlargest workpiece diameter: 160 mmlargest center hole diameter: 35 mmsmallest center hole diameter: 1.0 mmTaper angle: 60 - 90 °smallest / largest mounted point diameter: 12/40 mmStroke of the grinding spindle: 30 mmDressing spindle stroke: 50 mmMotor speed: 2800 rpm.Drive power: 0.075 kWDimensions L x W x H approx .: 600 x 700 x 1900 mmWeight approx .: 240 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make EUROLIFTYear of construction 2000Capacity: 1000 kgNumber of chain bar: 2Lifting height: 3000 mmWith- control cable- chain memory- flat design- CE marklittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

External cylindrical grinding machine make TOS type BHU 25Fabr. -No: 176 470, built in 1987Technical specifications:Center height: 150 mmDistance between centers: 600 mmGrinding wheel size: 400 x 40 x 127 mmConical grinding possible left + right: 8 °Workpiece headstock can be swiveled by: 90 °Speeds of the workpiece spindle 12 steps: 22.4 - 710 rpmLong table movement: 760 mmSpeed of the grinding spindle: 1570, 2050 rpmPower of the grinding spindle motor: 4 kWTotal power requirement: 7.5 kWExternal dimensions: 2000 x 1700 x 1500 mmWeight approx: 2300 kgWith- separate control cabinet- hydraulic power packused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Bes ...

Spur chain pulley make PFAFF type EcolineArt. -No: 0867005 Test. -No: 03727 Year 1999Lifting load: 2.0 tChain strand: 1Lifting height: 3.0 mHand chain pulling force at full load: 38 kgWeight approx: 26 kgOutside dimensions approx: 185 x 233 x 400 mmWith- short height of construction- Load pressure brakeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic internal and surface grinding machine make RIBON type RI 200Year of construction 1985sm. Grinding diameter: 6 mmmax. grinding diameter: 100 mmmax. grinding length: 200 mmmax. table lift: 400 mmTop height: 170 mm4 workpiece speeds: 155 - 455 rpm.2 spindle speeds: 14000/28000 rpm.Revolutions of the face grinding spindle: 4000 rpm.Speed of the table adjustable: 0 - 8 m / minkl. Feed of the internal grinding head: 0.005 mmautomat. Feed of the internal grinding head: 0.005 / 0.010 / 0.015 mmDrive power Workhead: 0.35 HPDrive power internal grinding head: 2 / 1.7 hpDrive power plane grinding head: 0.75 hpDrive power hydraulics: 1.4 hpDrive power cooling device: 0.15 hpDimensions L x W x H approx: 2200 x 1600 x 1600 mmWeight approx: 1500 kgWith- Internal grinding spindle- Face grinding head- Diamond stripperused, in very good conditionPrice on request.Delivery: ex warehouse or locatio ...

Wall swivel crane make STAHL type PW 125 kgMachine -No: 68543/12011 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic Precision Cylindrical Grinding Machine make MARUS type HS 1/600Machine -No: 692 Year 1969Center height: 115 mmWorkpiece diameter max.:220 mmMaximum distance: 650 mmGrinding length: 620 mmWorkpiece weight max.:20 kgGrinding wheel size: 200 x 20 mmGrinding wheel speed: 2900 rpm.Clamping tool cone: MK 2Oil tank filling: 60 lDrive power: 1.1 / 2.2 kWWeight approx: 850 kgExternal dimensions approx: 1950 x 870 x 1450 mmWith- hydraulic slide feedxa0xa0infinitely variable 0 - 4 m / min.- Spindle drive hydraulically, stepless 100 - 500 rpm.- Hydraulically operated quick release devicexa0xa0with foot pedal operation- Grinding support height adjustable by 90 mm- Machine for the dry longitudinal grinding of rolls andxa0xa0Cylinders with covers made of rubber, synthetics, cork, glass,xa0xa0Ceramics and the like- Stepless control of spindle speed andxa0xa0carriage- suitable for grinding tens ...

Wall swivel crane make STAHL type PW 125 kgMachine -No: 69840 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Internal grinding machine make JUNG type BS 22kl. Sandable hole: 14 mmGrindable bore: 150 mmGrinding length: 250 mmWorkpiece spindle bore: 44 mmPivoting headstock: 30 °Gr. distance of workpiece spindle - grinding support: 935 mmSpeeds workpiece spindle: 58 - 85 rpm.: 120 - 170 rpm.: 246 - 348 rpm.Weight approx. 2200 kgPower requirement: 8.01 kWWith:- DIAFORM grinding wheel diaform unitused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wall jib crane make DEMAG with wall bracketTechnical specifications:Load capacity: 250 kgThroat: 5000 mmWith- KBK systemusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Precision universal cylindrical grinding machine make OVERBECK type 250 RUMachine -No: 25211 built in 1971Technical specifications:Clamping length max .: 280 mmClamping length inside: 80 mmClamping diameter max .: 100 mmGrinding diameter: 100 mmGrinding length: 250 mmWorkpiece weight: 3.5 kgWorkpiece spindle speed continuously: 100 - 1000 rpm.Inner cone: MK 4Infinitely hydraulic longitudinal table movement: 0 - 6 m / minCross table movement on theDiameter related:Step by step: 0.001 - 0.01 mm / p.H.Continuous: 0 - 8 mm / minby hand: 0.001 mmhydraulic quick adjustment: 25 mmDrive power: 3.0 kWRequired space approx .: 1800 x 1500 x 1600 mmWeight approx: 800 kgwith- Internal grinding device- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We  ...

Universal cylindrical grinding machine make SCHAUDT type UR 500Fabr. -No: 114024, built in 1971 with internal / external and surface grinding deviceTechnical specifications:Distance between centers: 500 mmCenter height: 250 mmGrinding wheel diameter: 300 mmOperating voltage: 380 VLight voltage: 220 VDrive power bench grinder: 5.5 kWDrive power headstock: 1.1 kWWeight approx: 2000 kgExternal dimensions approx.: 2400 x 1500 x 1770 mmWith- 4-jaw grinding chuck 250 mm- fixed bezel- Tool cabinet with content (see photos)- several grinding wheels with flanges- coolant system- without tailstock !used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine ...

Crane fork Fabr. PFAFF type LM 2/20Fabr. -No: 800471/1 Year 1998Capacity: 2000 kgLoad center distance: 0.5 mFork length: 1100 mmFork width max: 1000 mmWeight: 153 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Honing machine make DELAPENA type Speedhone ESer. -No: 109002 built in 1990Bore diameter at aut. U. SEMIAUTO. Honing: 3 - 20 mmDiameter range for honing by hand: 1.2 - 79 mmSpindle speeds infinitely variable: 375 - 1500 rpmand: 250-1000 rpm.Speed of the working stroke stepless: 43 - 380 H / minStroke length between: 0 - 101 mmHon oil Container content: 45.5 lDrive power: 4.5 kWDimensions approx: 1370 x 1070 x 1440 mmWith- Supply and discharge deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric forklift make KÖTTGEN type ESK 1000 / 2SGSMachine -No: 43602, built in 1987/92Load capacity: 1000 kgStroke: 5200 mmwith battery: DETA 4 Pz S 400 80 Vand charger: DETA D 80 v 60 Aused in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal honing machine / cross grinding machine make SUNNEN type MBC 1804Fabr. -No: 87881 built in 1987to edit holes of any kind with Drm. between 1.5 - 140 mm andLength up to 400 mmDiameter range: 1.5 - 51/95 mmDiameter range for manual operation: 1.5 - 150 mmLength range through holes for measuring control: 255 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0 Passage u. Blind holes without gauge: 410 mm11 spindle speeds: 200 - 2500 rpm.5 stroke rates: 80 - 310 H / minDrive power spindle: 0.75 kWxa0xa0xa0 Stroke: 0.37 kWxa0xa0xa0 Oil pump: 0.37 kWCompressed air requirement: 0.8 m3 / at 6 barMains connection: 380 V, 50 HzDimensions L x W x H: 1610 x 1600 x 1575 mmWeight approx: 530 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Error ...

Tiller-guided electro-hydr. Tool lift Fabr. BAKA type EGV 60/605Masch. -No: SOE 27555 built in 1998 with drive Load capacity: 700 kgTable size: 1400 x 600 mmretracted height: 800 mmextended height: 1100 mmStroke: 300 mmBattery power: 24 VDead weight: 400 kgOutside dimensions approx: 1900 x 600 x 1100 mmWith- Battery 24Velec. Travel drive- Emergency stop switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric forklift make STILL type EFG 12Machine -No: 09261065, built in 1972Payload: 1200 kgMax. Lifting height: 4000 mmFork length: 1400 mmNet weight: 2410 kgpermissible total weight: 4.0 tHeight with retracted mast: 2150 mmWidth: 1000 mmWith- Battery 24V / 700 AKxa0xa0 12 cells / 605 kg, year 4/90- Duplex mast- chargerdespite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile work platform make EIFEL type E III 1Fabr. -No: 7102 built in 1979Payload: 300 kgLifting height: 7.2 mWorking height approx.: 9,0 mPlatform size: 1000 x 1200 mmStand area: 1700 x 1100 mmEngine power: 1.5 kWTotal length chassis: 2750 mmWeight approx.: 680 kgused..Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe grinding machine make KNOPP type 301 RSGMachine -No: 3577 built in 1981Technical specifications:Abrasive belt size: 300 x 60 mmPressure roller size: 200 x 60 mmFeed roller size: 120 x 60 mmDrive power of the feed roller: 0.15 kWDrive power of the sanding belt: 1.5 kWLength of transport rail: 850 mmExternal dimensions approx.: 400 x 700 x 1500 mmwith- automatic feed of the workpiece through the grinding positionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tiller-guided lift truck make SCHEFER type 1101030SpecialMasch. -No: 12011904-1 / 013 year of construction 2012Max. Lifting capacity: 1.0 tLifting height: 166 mmFork width: 160 mmFork length: 2500 mmWeight approx: 180 kgWith- CE markused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC gest. Portal grinding and polishing machine make HAU-SIMEX-RAPACK type FlexomatMachine -No: 88/08/30/2271 built in 1988Technical specifications:AXIS 1Longitudinal axis, horizontal X: 1100 mmTravel speed: 250 mm / secAXIS 2Transverse axis, horizontal Y: 510 mmTravel speed: 250 mm / selAXIS 3Vertical axis Z: 475 mmTravel speed: 190 mm / secAXIS 4Rotation axis, travel range: 210 °around the Z axis =: UTravel speed: 5.4 rpmAXIS 5Rotation axis, travel range: 360 °around the Y axis =: VTravel speed: 22 rpmAXIS 6Rotation axis, travel range: 360 °around the X axis =: WTravel speed: 22 rpmClamping force of the basic clamping device: 700 NExpansion shaft for workpiece: 50 mmNumber of milling units: 2Type of belt grinder: MSF 355Sanding belt size: 3500 x 100 mmContact disc size: 250-500 x 100 x 35 mmDrive power: 4.0 kWSpindle speed: 900-4350 rpm.Working height: 1000 mmExternal dimensions d.  ...

CNC surface grinding machine make JONES & SCHIPMANN type FORMAT 5/150Fabr. -No: B 017388 Year 1997Grinding area 450 x 150 mmDistance table to grinding wheel 400 mmGrinding wheel size 200/250 x 19/25 x 31.75 mmGrinding wheel speed range 1000-4000 rpm.Feed rate stepless 1 - 25 m / minJogging speed 1 - 6 m / minRadio passages max.:99smallest programmable vertical increment 0.001 mmFeed rate vertical 0.06 - 3000 mm / minFeed rate of electric handwheel 0.001 mmFeed rate transverse 0.06 - 3000 mm / minFeed speed of electric handwheel 0.001 mmExport passage across 99Drive power 2.2 kWDimensions L x W x H 1780 x 1250 x 1910 mmWeight approx.: 1200 kgWith- Magnetic plate 450 x 150 mm with fine pole pitch 2 mm- CNC control with screen ALLEN BRADLEY 8600 GP- Cooling device- integrated hydraulics- programmable speed control- direct position measuring system Heidenhain- Table end cushioning- Ball scre ...

Vacuum lifter for wood make FEZER type Vacofix 274700Machine No: 83355 Year 1987Load capacity: 360 kgCarrying length: 5000 mmDead weight: 480 kgDimensions approx .: 5000 x 1800 x 700 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electro-hydraulic surface grinding machine make LOG-O-MATIC type LFS 5020 CNCSerial no. 06889, year of construction 1989Max. Grinding length: 500 mmMax. Grinding width: 220 mmClamping area of the table: 500 x 165 mmMax. Transverse movement of the table: 205 mmSpindle center height: 500 mmGrinding wheel dimensions: 250 x 20 x 76 mmTable speed: 1 - 25 m / min.Autom. Transverse movement m. variabl. Speed: 0.1 - 0.6 m / min.Resolution of infeed axis: 0.005 mmResolution of the transverse feed: 0.01 mmPower of the grinding motor: 1.5 kWPower of the hydraulic motor: 1,1 kWWeight: 1500 kgExternal dimensions: 1700 x 2000 x 1800 mmWith- CNC control Engelhard- automatic grinding cycles with CNC delivery- Deep grinding !- CBN high-speed grinding 150 m / s- for CBN and diamond grinding wheels- for steel, carbide, plastic and ceramic- Hydraulic unit- Cooling devicevery little used, in very good condit ...

Gear milling machine / gear hobbing machine make NILES type RF 6 M 15Lizensbau Pfauter Chemnitz, year of construction unfortunately not visibleTechnical specifications:Wheel diameter to be milled for spur gears: 1500 mmmax. Milling to be milled: 15 Mod.Range of helical gear drm. at10 ° spiral approx.: 1500 mm20 ° spiral approx.: 1500 mm30 ° spiral approx: 1350 mm40 ° spiral approx.: 1060 mm45 ° spiral approx: 900 mm50 ° spiral "750 mm60 ° spiral approx.: 450 mmBurr turns per minute: 20-26-33-43-56-71-90-118gr. Outer diameter of the milling cutter: 200 mmDrm. Milling mandrels: 27-32-40 mmDrm. of the workpiece clamping mandrel: 60 mmRotation of the drive pulley on the machine per minute: 520Drm. the drive pulley on the machine: 500 mmWidth of the drive pulley on the machine: 130 mmPower requirement: 10 hpRotation of the engine: approx. 1000 rpmExternal dimensions of the machine: 320 ...

Surface grinding machine make STANKO type 3 D 711 WF-11Fabr. -No: 1330, built in 1989Clamping surface of the magnetic plate: 630 x 200 mmTravel length: 700/670 mmTravel crosswise: 250/245 mmGrinding wheel size: 250 mmGrinding wheel speed: 2230 rpm.Distance spindle axis table: 80 - 550 mmVertical sanding adjustment: 80 - 550 mmLifting speed continuously stepless: 2 - 30 m / minCrossfeed stepless: 0.3 - 35 m / minCrossfeed stepless: 0.3 - 40 mmVertical adjustment stepless: 0.001 - 0.09 mmRapid traverse vertical: 0.3 m / minRapid traverse cross slide cross: 1.6 m / minDrive power: 4 kWOutside dimensions approx: 2500 x 1700 x 2000 mmWeight ca.:2,6 tWith- Magnetic disk- Cooling device with magnetic separator- separate electrical cabinetused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data ar ...

Flat belt grinding machine make MAFAC type NT 300 SFabr. -No: 417643 Year 1986Tape dimensions: 2000 x 300 mmBelt speeds: 6, 8, 10, 12, 16, 20 m / srequired air pressure: 5 - 6 barDrive power: 9.3 kWDimensions L x W x H: 1440 x 1200 x 2047 mmWeight approx: 500 kgWith- Table motorized vertical and horizontal- wet grinding device- pneum. belt tension- Deburring and chamfering deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Belt sander, make UNKNOWNTechnical specifications:Band width: 40 mmSupport table: 400 x 265 mmExternal dimensions: 550 x 700 x 1500 mmWeight approx: 80 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rotary table flat grinding machine with vertical spindle make LODI / DORMAC type RV 600Machine -No: 1916 built in 2001Technical specifications:Table diameter: 600 mmmax.processing diameter: 600 mmmax.grinding height: 350 mmGrinding wheel diameter: 325 mmRotary table speed: 10 - 20 rpmautomatic vertical feed path: 0.005 - 0.02 mmDrive power spindle motor: 6.0 kWDimensions: 1700 x 1500 x 1900 mmWeight approx: 1700 kgwith- complete Cooling device- vertical ropes- man. Dressing device- automatic vertical feed synchronized with table rotation- T-slots in the table- Additionally screwed on magnetic plateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAH ...

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

Double grinding machine / double grinding block make REMA type DS 30/400 AFabr. -No: 02703 with built-in extractionGrinding wheel size 400 x 40 x 127 mmGrinding wheel speed 1450 rpm.Drive power 3 hp - 2.2 kWFlow rate 10 m3Power connection 380 V, 50 HzWeight approx. 240 kgDimensions 960 x 732 x 1188 mmWith- built-in suction- Standard versionused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double tool grinding machine make REMA type DS 12/250 WFabr. -No: 077030Grinding wheel size: 250 x 40 x 51 mmGrinding wheel speed: 1450 rpm.Table size: 165 x 180 mmDrive power: 0.73 kWDimensions L x W x H: 900 x 800 x 1100 mmWith- wet grinding device- right tiltable table- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface grinding machine make ELB type SWN 6 MC-KMachine -No: 189280484, built in 1984Grinding length: 600 mmGrinding width: 375 mmWorkpiece height: 375 mmTable length: 997.5 mmTable width: 375 mmMax. Workpiece weight: 300 kgAutom. Cross feed adjustable: 60 mm / strokeVertical feed, 1 graduation: 0.001 - 0.06 mmGrinding wheel diameter: 300 mmGrinding wheel width: 50 mmGrinding wheel bore diameter: 76.2 mmConnection voltage: 380VGrinding spindle motor: 3.7 / 4.5 kWTotal power requirement: 9 kWMachine weight approx: 3.5 tonsOutside dimensions approx: 2200 x 2000 x 2400 mmWith- mot. autom. trainer- Digital display for longitudinal u.- transverse axisused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always av ...

Double grinding block make REMA type DS 30/350 WMash, -No: 02720Grinding wheel speed: 1450 rpm.Slice size: 350 x 40 x 76 mmDrive power: 2.2 kWDimensions approx: 1080 x 600 x 1200 mmWith- Underframe- Cooling device- 2 tiltable tablesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface grinding machine make WMW type SFW 200 x 600Fabr -No: 330690Technical specifications:Working area: 200 x 600 mmgr. adjustment in Y-direction: 230 mmgr. adjustment in X-direction: 690 mmgr. Distance between worktable and spindle center: 500 mmUsable table surface: 200 x 600 mmpermitted table load: 110 kpTable speed stepless: 2 - 18 m / minGrinding wheel size: 200 x 20 x 51 mmelectrical connection: 3 kWGrinding spindle drive: 1.1 kWOutside dimensions approx: 1500 x 1700 x 1900 mmWeight approx: 1.01 tWith- Electromagnetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double grinder make REMA type DS 45/500in standard designTechnical specifications:Grinding wheel size: 500 x 60 x 127 mmGrinding wheel speed: 950 rpmDrive power: 3.3 kWDimensions: 1260 x 850 x 950 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface Grinding Machine Fabr. STANKO Type 3 D 722 WMake -No: 43432, built in 1987Sanding area: 1250 x 320 x 400 mmsm./lg. Distance spindle center - clamping surface Table: 190/630 mmTable clamping surface: 1000 x 320 mmsm./lg. hydr. Longitudinal adjustment of the table: 300/1050 mmClamping surface of the magnetic plate: 900 x 320 mmHeight of the magnetic disk: 120 mmgr. Vertical adjustment of the headstock: 440 mmGr. transverse adjustment of the wheelhead: 400 mmsm./lg. Outer diameter of the grinding wheel: 325/450 mmDrm. Grinding wheel bore: 203 mmGrinding wheel speed: 1500 rpm.Stepless longitudinal movement of the table: 2.0 - 40 m / min.infinitely variable feed of the headstock: 0.5 - 3.0 m / min.Vertical rapid adjustment of the headstock: 406 mm / min.Drive power: 10 kWOutside dimensions approx: 3300 x 2020 x 2290 mmWeight approx: 7100 kgWith- magnetic disk- Separate hydraulics- Con ...

4-point tool grinding machine make SOLID type DS 3 CDMachine -No: 146064 Year 1964Grinding wheel pre-sanding SC: 200 x 50 x 51 mmTable: 400 x 150 mmGrinding wheel regrind SC: 200 x 50 x 51 mmTable: 400 x 150 mmGrinding wheel lapping cut diamond: 125 x 12.5 x 51 mmTable: 400 x 150 mmChip breaker grinding wheel: 150 x 8 x 51 mm2 engine speeds: 1400/2800 rpm.Drive power: 0.5 / 0.8 hpDimensions L x W x H /: 1110 x 1000 x 1280 mmWeight approx: 300 kgWith- Cooling device- Underframeused, from a vocational school in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools