mmw used for sale

Vacuum Suction Blast Machine Fabr. INNOVATION Type ZEA 01Ser. -No: 581-08-ZEA01 built in 2008Blasting medium filling volume KB 7 300 lCompressed air supply: 6.0 barperm. max. Negative pressure: 550 mbarExternal dimensions of the blasting hood: 905 x 204 x 605 mmWeight of the blasting hood: 30 kg:External dimensions of the media tower for the zinc removal: 1300 x 1300 x 3650 mmWeight of the media tower: 650 kgwithout industrial vacuum cleanerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bench Drilling Machine Fabr. AEG Type DTBK 15Max. Drilling capacity: 15 mmSpindle mounting: MK 14 speeds: 350/550/875/1400 rpm.Quill stroke: 105 mmDischarge: 250 mmColumn diameter: 80 mmTable size: 250 x 250 mmDrive power: 450 WPower connection: 380 V / 50 HzOutside dimensions approx: 300 x 650 x 950 mmWith- Drill chuck and insert pin- swing-away intermediate tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bench drill Fabr. FLOTT type TB 16Drilling capacity in steel: 16/20 mmDischarge: 250 mmSpindle mount: MK 2Quill stroke: 100 mm12 speeds: 220 - 4500 rpm.Table size: 290 x 220 mmColumn diameter: 100 mmDrive power: 0.75 kWExternal dimensions approx: 600 x 300 x 1200 mmWith:- Underframeused, in good working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Fine boring machine make OVERBECK type Zetto 03Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- Underframe- without transformerused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Fine boring machine make OVERBECK type Zetto 03Machine -No: 1130 Year 1972Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- TransformerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Heavy gear box column drilling machine make ARBOGA type GSMH 4508Fabr. -No: 15641Technical specifications:Spindle mount: MK 4Drilling capacity in steel: 45 mmTable size: 430 x 615 mmProjection: 365 mmSpindle stroke: 195 mm4 automat. Feed rates: 0.10-0.408 spindle speeds: 63 - 800 rpmDrive power: 3.3 / 2.2 kWExternal dimensions L x W x H: 730 x 1040 x 2640 mmWeight: 1026 kgwith- Thread cutting device- coolant pump (without container)usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical drilling machine make ALZMETALL type Abomat 40Fabr. -No: 147 A built in 1968Drilling capacity in St / GG: 45/60 mmSpindle mount: MK 5Table size: 500 x 500 mm12 spindle speeds: 35 - 1400 rpm.7 automatic feeds: 0.04 - 0.3 mm / revSpindle head diameter: 62 mmDrilling carriage stroke: 400 mmDischarge: 330 mmMax. Distance table to spindle: 1165 mmMax. Distance base plate to spindle: 1550 mmDrive power: 4 hpDimensions L x W x H: 1350 x 600 x 2250 mmWeight approx. 1200 kgWith- semi-automatic workflow- electr. controlled jump feed- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pillar Drilling Machine make IXION type BS 50Mash. -No: 141395Drilling capacity: 50 mmSpindle mount: MK 5Drilling depth: 200 mmProjection: 325 mmTable surface: 650 x 500 mmColumn diameter: 160 mm4 automatic feeds: 0.08 / 0.12 / 0.2 / 0.32Spindle speeds stepless: 66 - 2000 rpm.Engine power: 2.0 / 3.8 kWWeight approx: 670 kgExternal dimensions: 700 x 1000 x 2070 mmWith- infinitely variable spindle speeds- electromagnetic feed circuit- Table adjustment from the frontused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column, boring and tapping machine make IXION type BSS 13 GLVMachine -No: 8106Drilling capacity: 13 mmTapping capacity: M 5 - M 18 x 1,04 spindle speeds: 160 - 800 rpm.Outreach: 220 mmColumn diameter: 75 mmTable size: 220 x 220 mmExternal dimensions approx: 400 x 600 x 1650 mmWith- Guide cartridge facility- Thread cutting device- Footswitch for R + L - barrelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column Drilling Machine make GILLARDON type GB 50 VFabr. -No: 0111260 Year 1978Drilling capacity ST: 60:50 mmDrilling capacity GG: 20:60 mmDrilling capacity ST: 60:65 mmTapping performance: M 50 / M 70Spindle mount: MK 4Stepless spindle speeds: 35 - 950 rpm.4 automatic feed rates: 0.1 - 0.4 mm / revQuill stroke: 225 mmProjection: 360 mmDistance spindle / table min./max.:165 / 740 mmDistance spindle / base plate min./max.:1220 mmRound table diameter: 500 mmDrive power: 4.0 kWDimensions L x W x H: 600 x 900 x 2100 mmWeight approx: 810 kgWith- stepless speed adjustment- 4 automatic feeds- Built-in cooling device- round tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.B ...

Gear column drilling machine make WMW VEB Saalfeld type BS 25BMachine -No: 9587/59Technical specifications:Drilling capacity in steel - diameter: 4 - 32 mmThread cutting ST 60 / Alu up to: M 20 / M 32Spindle mount: MK 3Throat: 280 mmDrilling stroke: 150 mm4 spindle speeds: 125 - 710 rpm.4 feed rates: 0.10 / 0.16 / 0.25Table size with channel: 570 x 475 mmTable size clamping surface: 450 x 355 mmDrive power: 3 kWWeight: 700 kgExternal dimensions: 900 x 570 x 2400 mmWith- automatic feeds- Thread cutting with compensating chuck- machine light- Emergency stop switch- separate cooling deviceused, in working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine ...

Pillar drilling machine make WEBO type B 20Fabr. -No: 149/41Technical specifications:Drilling capacity: 20 mm8 spindle speeds: 125 - 1400 rpm.Spindle mount: MK 2Throat: 255 mmSpindle stroke: 190 mmTable size: 450 x 360 mmwith 2 T-slots 14 mmDrive power: 1.3 / 1.1 kWDimensions: 1000 x 600 x 1900 mmWeight approx .: 400 kgWith- foot switch- Height adjustable table 400 mm- Height adjustable head approx. 250 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Box-stand gear drilling machine make STANKO type 2 H 118Fabr. -No: 43358Technical specifications:Drilling capacity steel: 22 mmSpindle mount: MK 2Table size: 360 x 320 mmDrill head and table height adjustable6 feed rates: 0.1-0.569 spindle speeds: 180 - 2800 rpmMotor power: 1.5 kWExternal dimensions L x W x H: 500 x 700 x 2000 mmWeight approx: 350 kgWith- coolant device- right + left run- automatic feedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

High performance horizontal boring mill make ALZMETALL type Abomat 30Machine -No: 346, built in 1981revolver drill headNumber of tool holders: 6-foldDrilling capacity: 35 mmDischarge: 330 mmSpindle mount: MK 4Longitudinal table: size 500Adjustment travel: 540 mmRotary tableOperation: manual-hydraulicDiameter: 600 mmfurther techn. Dates:Machining length min / max: 470/1170 mmInsert height of the workpiece: 1223 mmTop height: 235 mmMain motor: 3.2 kWHydraulic motor: 1.5 kWFeed rate: 1.1 kWExternal dimensions: 3000 x 1700 x 2100 mmSpace required incl. Hydraulic and control cabinet approx .: 4000 x 3000 mmWeight approx. 2.5 tonsWith- 6-fold turret GRAS type ARBO 308- Dividing head Fibrotact Y51 400 UN2RA graduation 2; 3; 4; 6; 8; 10; 12; 16; 20; 24; 240smallest partial angle 1.5 °- FIBRO rotary indexing table MY13 800NRA manual-hydraulic, smallest part angle 1 °- Feed FORKARDT F 400- slide ...

Column drilling machine make ALZMETALL type AB 3 ESMachine -No: 16653Technical specifications:Drilling capacity: 28 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 400 x 300 mmInfinitely variable spindle speeds: 65 - 1750 rpm.Spindle stroke: 160 mmDrive power: 0.9 / 1.3 kWExternal dimensions approx.: 500 x 900 x 2200 mmWeight approx: 330 kgwith- stepless spindle speeds- R + L run- cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column drilling machine make ALZMETALL type AB 25 SVMachine -No: 1717 built in 1976Technical specifications:Drilling capacity in ST 60: 28 mmDrilling capacity in GG 20: 30 mmDrilling capacity in ST 60: 35 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 500 x 400 mmClamping surface: 400 x 300 mmInfinitely variable spindle speeds: 130 - 480/480 - 1750 rpm.Spindle stroke: 160 mmautomatic feed: 0.14 mm / rev.Drive power: 2.2 kWMachine height approx .: 1860 mmWeight approx: 320 kgwith- stepless spindle speeds- height adjustable table- cooling device- R. + L. runused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Linear Drilling and Tapping Machine make IXION type PC 1-6000 BT 30 ST / GSEYear of construction 12/1999 for long part machining machine no. 240028Continuous drilling capacity: 30 mmNormal drilling capacity: 35 mmTapping performance up to: M 30Spindle mount: MK 3Spindle speeds stepless: 160 - 2800 rpm.Outreach: 280 mmDrilling depth: 150 mmDistance spindle to table: 220-600 mmRapid traverse: 6 m / minColumn diameter: 120 mmDriving accuracy: + - 0.1 mmTable surface: 390 x 420 mmWorkpiece weight: 60 kgDrive power: 1.3 / 2.3 kWDimensions: 9500 x 1500 x 1850 mmWith- hydr. pneumatic feed unit VF 22- Height adjustment from the front- Anti-twist device- Minimal quantity lubrication system- Thread cutting device- digital depth and speed display- Transversal travel of drilling unit 250 mm programmable- single-acting pneumatic vice- Pinion feed unit for semi-automatic drilling, steplesshydrauli ...

Column drilling machine make ALZMETALL type AB 3 ESMachine -No: 81978Technical specifications:Drilling capacity: 28 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 400 x 300 mmInfinitely variable spindle speeds: 65 - 1750 rpm.Spindle stroke: 160 mmDrive power: 0.9 / 1.3 kWExternal dimensions approx.: 500 x 900 x 2200 mmWeight approx: 330 kgwith- stepless spindle speedsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pillar drilling machine make ALZMETALL type AB 60 HSTMachine -No: 203 built in 1985Technical specifications:Drilling capacity ST 60:65 mmDrilling capacity GG 20:75 mmSpindle mount: MK 5Projection: 400 mmTable size: 700 x 520 mmQuill stroke: 240 mmQuill diameter: 98 mm5 automatic feeds: 0.1 - 0.4 mmSpindle speeds infinitely variable: 40 - 1600 rpm.Drive power: 5 / 7.5 kWDimensions approx.: 2000 x 1000 x 2450 mmWeight approx.: 1500 kgWith- Thread cutting device- Table adjustment with hand crank- electric feed clutch- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-spindle series drilling machine make SOLID type R 10/210Mash. -No: 513307/08Drilling capacity in St 60:10 mmDrilling capacity in St 60:13 mmDrilling depth: 60 mmDischarge: 165 mm6 spindle speeds: 730 - 4150 rpm.Column diameter: 60 mmSpindle mount: B 16Table size: 500 x 200 mmSpindle distance: 300 mmDrive power: 2 x 0.37 kWDimensions L x W x H approx .: 610 x 450 x 650 mmWeight approx. 200 kgWith- Drill chuck 2 x- Vice 2 x- Base in table versionlittle used, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Flange drilling machine make WÖLFEL type TH 11Mash. -No: 35230Drilling capacity: 30 mmSpindle mount: MK 4Projection: 375 mmQuill stroke: 180 mmTable diameter: 800mm12 spindle speeds: 50 - 2120 rpm.4 automatic feeds: 0.1 - 0.25 mm / revDrive power: 1.5 / 2.2 kWDimensions: 900 x 1800 x 2000 mmWeight approx: 1500 kgWith- Table scale adjustment (rotary table)- Thread cutting device- deep hole drilling- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deep hole drilling machine make TBT Tiefbohrtechnik type T 10-250Machine no. 418.311.215, year of construction 1989 with control SIMATIC S5Technical specifications:Max. Drilling depth: 250 mmTable size 420 x 780 mmDrilling area steel ST 60 full drilling: max 16 mm Boring: max 20 mm:Drilling process: ELB (single-lip drilling)Number of drilling spindles: 1Main spindle drive: 2.6 / 3.2 kWSpeeds: 1020 - 4400 rpm: 1960 - 2950 rpm: 2950 - 4400 rpm: 4400 - 8950 rpmFilters: plate filter 60 l / minCooling lubrication system: 670 l deep drilling oilelectrical connection: 380 V, 15 kWExternal dimensions of the system including SS L x W x H: 3850 x 1800 x 2000 mmWeight approx .: 2200 kgWith- SIMATIC S5 115 U ELGO 85 P controller- separate control cabinet- internal cooling- various single-lip drills (see photos)- workpiece counter- coolant system- filter- Central lubrication unit- Instruction manual  ...

Deep hole drilling machine / deep hole drilling machine make LOCH type TB 2-11 / 300/2Fabr. -No: 182-300-1970, year of construction 1991Technical specifications:Max drilling depth with submersible spindle: 300 mmWorkpiece diameter / full drilling range in steel: 4 - 18 mmNumber of spindles: 2Drilling system: ELBDrilling method: rotating tool: counter-rotating workpieceWorking stroke, full + boring max .: 1000 mmCenter height: 249.9 mmMain spindle speed: 96 - 2500 rpm.Speed levels: 4Infinitely variable feed: 0 - 1000 mm / minRapid traverse forwards + backwards: 6 m / sec.Tapping feed rate: 60%Spindle mount: DIN 55022 Gr. 5Working pressure: 200 barMain drive motor power: 15/19 kWMotor power counter-rotating tailstock: 5.5 kWTotal weight approx .: 8.0 tfor further data see AWF cardwith- Control SIEMENS SPS-S5-115 U- 2 drilling spindles- chip conveyor- cooling deviceused, in good conditionPr ...

Horizontal hand lever deep hole drilling machine make UNKNOWNTechnical specifications:Table size: 230 x 340 mmDrill chuck size: 20 mmDrive power: 2.95 hpDimensions approx: 1000 x 850 x 1400 mmWeight approx: 150 kgWith- height adjustable table- Drill chucks up to 16 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4 Head Series drilling machine make Johannes TITTEL type BMT 6/8Fabr. -No: 6898, year of construction 1964consisting of 4 table top drillsTechnical data per drilling unit:Drilling capacity: 0.2 - 6 mmDrilling depth: 50 mmgr. distance base plate chuck: 240 mmProjection: 120 mmColumn diameter: 50 mm6 spindle speeds: 620 - 9530 rpmFeed: manualDrive power per machine: 250 WTable size: 970 x 195 mmExternal dimensions per machine: 1050 x 500 x 500 mmWith:- all heads individually height adjustable- 1 sprocket chuck eachused, despite year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deep hole drilling machine make TBT type T10-500Machine -No: 410 311 053 built in 1980Technical specifications:Max drilling depth: 500 mmDrilling range in steel: 3 -12 mmBoring max. 15 mmMin.spindle speed: 2520 1 / minMaximum speed of the work spindle: 8000 1 / minInfinitely variable feed: 8 - 160/35 - 320 mm / minRated speed continuously variable transmission: 5.9 - 53 / 11.8 - 106 1 / minControl range: 9Rapid traverse speed: 3 m / minCenter height above ground: 1150 mmCenter height over bed: 230 mmCenter height over table / slide: 180 mmTable dimensions: 420 x 1030 mmTable grooves design and size: DIN 650/4Coolant tank min / max: 590/670 ltrTotal connected load: 9.0 kWExternal dimensions: 3400 x 1700 x 1800 mmWeight approx: 2500 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are n ...

Jig boring machine make SIP type MP 3 KFabr.-Nr. 9809 year 1981Clamping surface of the worktable: 520 x 380 mmLongitudinal adjustment of the work table: 450 mmTransverse adjustment of the drill spindle slide: 350 mmDistance between table surface max .: 520 mmxa0xa0xa0 and drill spindle: 120 mmPassage between the uprights: 600 mmVertical adjustment of the crossbeam: 400 mmDrill spindle: MK 2Infeed stroke: 150 mmSpindle speeds: 75-2000 rpm.automatic feed: 0.02-0.18 mmDrilling capacity in cast iron Drm.:25 mmxa0xa0xa0 in mild steel Drm.:20 mmGr. boring diameter: 100 mmReading on the auxiliary scale: 1 mmAccuracy: 0.005 mmMain drive motor: 1 hpDimensions L x W x H: 1740 x 1520 x 1880 mmWeight approx: 1680 kgWith- guide arm- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are  ...

Universal deep hole drilling machine make DEGEN type UTB 500Machine -No: 061/86 built in 1986Technical specifications:Quill stroke / drilling depth: 500 mmTravel X (cross table): 400 mmTravel Y (vertical spindle head): 450 mmTravel Z (table lengthways): 250 mmDistance from the center of the spindle to the clamping surface: 250 mmmax.workpiece weight: 1000 kgTable surface area: 800 x 400 mmTable height: 1000 mmSpindle mount: MK 2Max.drilling diameter with twist drill / Speedbit drill: 16/25 mmmax.thread diameter: 16 mmQuill feed: 0 - 150 mm / min.Rapid traverse quill: 3.6 m / min8 spindle speeds: 240 - 2400 rpm.Drive power spindle: 0.8 / 1.3 kWCoolant pump: 0.07 kWServo motor: 0.65 kWTotal power requirement: 2 kWWeight approx: 980 kgDimensions L x W x H (with control panel) approx: 2420 x 1200 x 1850 mmWith- Control panel with digital display for drilling depth and drilling cycle- 2-axis  ...

Radial drilling machine make MAS type VR 6 AMachine -No: 219 built in 1963Projection: 2000 mmgr. drilling capacity at 60/25 kg strength: 63/80 mmgr. boring capacity: 300 mmgr. thread cutting capacity: M 64 x 4 / M 85 x 4kl./gr. Distance spindle / base plate: 540/1865 mmvertical adjustment of the boom: 950 mmhorizontal adjustment of the boom: 1613 mmSwing possibility of the boom: 0 - 360 °Spindle mount: MK 5Spindle stroke: 380 mm16 spindle speeds: 11.2 - 2000 rpm.16 feeds: 0.035 - 2.8 mm / rev.Dimensions of the base plate: 3200 x 1100 mmClamping surface of the base plate: 2290 x 1080 mmHeight of the base plate: 235 mmDrive power: 5.5 kWTotal installed power: 12.6 kWDimensions approx: 3240 x 1300 x 3000/3900 mmWeight approx: 5800 kgWith- hydraulic clampingused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: ...

Drilling machine make RUSS type 86-185Machine -No: 287 built in 1986Spindle mountings: ISA 40Discharge: 300 mmDrilling stroke: 200 mmTable size: 400 x 300 mmOutside dimensions approx: 900 x 1200 x 2200 mmWith- Manual operation- aut. operation- infinitely variable speed and feed control- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Radial drilling machine make VEB Schmölln type BR 40x1250Machine -No: 62/63, built in 1963Technical specifications:Drilling capacity in ST 60- 45 mmDrilling capacity in GGL 20: 60 mmSpindle mount: MK 5Extension of column jacket spindle axis: 300 - 1250 mmDrilling radius: 450 - 1400 mmDrilling depth: 355 mmClamping surface: 1450 x 920 mmDrilling spindle - base plate: 375 x 1375 mmHeight adjustment of the boom: 750 mmLateral displacement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range: 0.063 - 0.63 mm / revConnected load of the machine: 5.2 kWSpace requirement: 2050 x 930 x 3200 mmWeight approx: 3000 kgWith- Cube tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always availa ...

Series drilling machine make WÖRNER type B 13Fabr. -No: 35616-35621 = 6 drill heads arranged in semicircleNumber of drill heads 6Drilling capacity 13 mmeach 12 speeds 280 - 3550 rpm.Quill stroke 120 mmDischarge 250 mminner semicircle 780 mmTable width 375 mmouter half circle 1155 mmDrive power 0.55 / 1.1 kWWeight approx. 2 tDimensions L x W x H 2300 x 1500 x 1470 mmWith- height adjustable design- working position = sitting in the inner semicircleused, optics industry, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-way geared in-line drilling machine make WEBO type Varia 20Fabr. -No: 20/14/1 and 20/13/6Technical specifications:Drilling capacity approx. 30 mmSpindle mount: MK 330 spindle speeds: 103 - 1450 rpmDistance spindle nose table: 100 - 600 mmProjection: 260 mmSpindle stroke: 150 mmFeeds: 0.1 - 0.3 mm / rev:Table size with / without channel: 100 x 500/800 x 350 mmT-slots in the table: 18 mmExternal dimensions L x W x H: 1000 x 900 x 2600 mmWeight approx: 1800 kgWith- Right-left run- Table height adjustable via crank- Drill heads height adjustable via crankused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Radial drilling machine make CSEPEL type RF 22 / BMachine -No: 69085 built in 1969Technical specifications:Drilling capacity in steel: 40 mmDrilling capacity in GG: 50 mmTapping up to: 50/60 mmProjection: 1600 mmQuill stroke: 300 mmSpindle mount: MK 512 spindle speeds: 45 - 2000 rpm.9 automatic feeds: 0.05 - 1.25 mm / rev.Column diameter: 360 mmsmall / large Spindle distance from base plate: 350/1420 mmSize of the clamping plate: 1675 x 930 mmPower of the drill motor: 3.0 kWtotal installed power: 4.97 kWWeight approx: 3.8 tDimensions approx: 2540 x 930 x 2900 mmwith- electro-hydr. Central clamping- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Heavy 4-fold geared in-line drilling machine make WMW Saalfeld type BKR 20 x 4 AIFabr. -No: 08712-15Technical specifications:Drilling capacity in steel: 25 - 30 mmSpindle mount: MK 38 spindle speeds: 180 - 2000 rpm.4 automatic feeds: 0.08 - 0.32 mm / revQuill stroke: 140 mmTable size: 1800 x 350 mmProjection: 275 mmDrive power: 2 kWtotal connected load: 8 kWDimensions L x W x H: 2350 x 920 x 2350 mmWeight approx: 2480 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Radial drilling machine make HELLER type RB 50/1250Serial -No: 29551 built in 1961Technical specifications:Drilling capacity in steel: 50 mmDrilling capacity in GG: 60 mm12 spindle speeds: 33 - 1500 rpm.Spindle mount: MK 512 automatic feeds: 0.08 - 1.5 mm/revQuill stroke: 301 mmProjection: 1250 mmColumn diameter: 380 mmDrive power: 4 kWDimensions approx.: 2200 x 2300 x 2780/3110 mmWeight approx.: 4250 kgused, in real good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Line drilling machine make GILLARDONwith 4 drilling heads type R 20Fabr. -No: 0150262, 0150263, 0150264, 0150265,Technical specifications:Drilling capacity GG: 25 mmSpindle mount: MK 2Quill stroke: 150 mmProjection: 285 mmColumn diameter: 105 mmMotor power per drill head: 0.5 / 0.9 kWWork table size approx .: 1600 x 400 mm15 spindle speeds: 200 - 4500 rpm.Overall external dimensions L x W x H: 1600 x 800 x 1800 mmWeight approx: 1700 kgWith- 1 drilling head with right-left rotation- 4 x drill chucks- each drill head individually adjustable in height and can be swiveled around the column- separate coolant deviceused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM ...

Radial drilling machine make VEB Schmölln Bowes type BR 40x1250/1Machine -No: 691354Technical specifications:Drilling capacity in ST 60:40 mmDrilling capacity in GG 255 mmProjection: 1250 mmDrilling depth: 355 mmClamping area: 1450 x 920 mmRemove drilling spindle - base plate: 375 x 1375 mmBoom height adjustment: 750 mmLateral movement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range 6 x: 0.063 - 0.63 mm/revConnection value of the machine: 4.7 kWRequired space: 2050 x 930 mmHeight of the machine Transport height / max boom above: 2800 /3200 mmWeight approx.: 3000 kgColor greenwith- Dice table- new electricsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for you ...

3-way row drilling machine make KNUTH type KGB 25Year of construction 1996Technical specifications:max.drilling capacity in steel: 25 mmTapping capacity: M 16Spindle mount: MK 3Quill stroke: 150 mm3 spindle speeds: 100 - 2900 rpm.Projection: 225 mmDistance spindle - table: 15 - 470 mmTable L x W: 1300 x 295 mmDrive power: 0.75 kW / 380 VDimensions approx .: 1600 x 800 x 1900 mmWeight approx: 750 kgwith- 3 drill headsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

3-head in-line drilling machine make WÖRNER type TB 13Machine -No: 7188Technical specifications:Drilling capacity: 13 mmSpindle speeds: 560 - 3500 rpm.Number of spindle speeds: 2Quill stroke: 70 mm1 spindle speed: 260 - 480 rpm.1 quill stroke: 180 mmwith- R + L run with 3rd spindle / thread- Table size 1030 x 310 mm- Table height adjustment- Heads with height adjustmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic articulated spindle drilling machine make WÖLFEL type GBK 20Fabr. -No: 102028, built in 1975Technical specifications:Number of articulated spindles: 4 pieces18 spindle speeds: 75 - 1600 rpmTable size with channel: 800 x 660 mmTable adjustment via: hand crankHeight adjustment of the drilling head: hydraulicDrive power: 3.3 / 4.4 kWExternal dimensions of the machine: 800 x 1150 x 2900 mmWeight approx: 2000 kgWith- separate control cabinet 1000 x 550 x 1150 mm- separate hydraulic 700 x 400 x 1050 mm- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi-spindle and tapping machine make WÖLFEL type GBK 10Machine -No: 101015, built in 1985Technical specifications:Hole pattern diameter: 340 mm18 spindle speeds: 140 - 3000 rpm.Max drilling stroke: 400 mmTable size: 550 x 460 mmDistance table / drill headi. top position: 1300 mmDrive power: 3 kWExternal dimensions: 1300 x 850 x 2850 mmwith- extensive accessories- separate control cabinet- separate hydraulicsused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Small jig boring machine PERRIN type AVMachine -No: 367Table size: 500 x 275 mmLongitudinal path X: 410 mmTransverse Y: 280 mmHeadstock Z: 450 mmSpindle mount: MK 2Spindle speeds stepless: 50 - 3200 rpm.Quill stroke: 120 mmExternal dimensions approx.:1100 x 1000 x 1800 mmWith- Coordinate table PTX 40- electr. Contact stroke- mot. spindle head height adjustment- optical longitudinal and lateral displayused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi-spindle drilling machine make STEINEL type BGS 140Machine -No: 9482Technical specifications:Number of spindles max .: 12 pieces:Articulated spindles installed: 3 pieces8 spindle speeds: 355 - 2800 rpm:Motor power: 1.2 kWDimensions L x D x H: 500 x 700 x 1900 mmWeight: 172 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal CNC drilling and milling machine make PFEIFER type F 105 CNCFabr. -No: 2399, built in 1991Technical specifications:Travel X: 1600 mmY: 1000 mmZ: 1000 mmSpindle diameter: 105 mmSpindle mount: ISO 50Quill stroke: 500 mmDistance from the center of the spindle to the clamping surface: 0 - 1000 mmmax.workpiece weight: 4000 kgSlewing ring diameter: 830 mmClamping area: 1000 x 1200 mmTable height above floor: 875 mmExternal dimensions: 4830 x 3040 x 2700 mmWeight: 10850 kgwith- Control Heidenhain TNC 355- Measuring device actual value display X, Y, Z, W- hydr. Clamping- automatic central lubrication- Liquid cooling device- Ball screws X, Y, Z, W- fixators- Ampere meter- oil cooling- electr. HR 250 handwheel- mech. Hand crossused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bi ...

Hydraulic multi-spindle drilling machine make BURKHARDT + WEBER type HGB 100Order.-No: . 12141100 year of manufacture 1984Technical specifications:Feed :3-1400mm/min.Table size dia.: 550 mmGuide plate: 600 x 600 mmNumber of taps:412 speeds: 140 - 2800 rpm.Dimensions approx.: 2000 x 1800 x 2800 mm Hydraulic dimensions approx.: 1500 x 1000 x 2200 mmControl cabinet dimensions approx.: 2100 x 1100 x 700 mmWith- Automatic- separate hydraulics- control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Radial drilling machine make STANKO type 2 A 554Machine -No: 8579, built in 1990Technical specifications:Drilling capacity i. Full ST 450 mmThread cutting ST 45 M 52Discharge 1600 mmSpindle mount MK 524 speeds 18-2000 rpm.24 feeds 0.045 - 5.0 mm / minColumn diameter 315 mmDrive power 9.0 kWDimensions L x W x H 2850 x 1030 x 3430 mmWeight approx. 4700 kgWith- Cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Radial drilling machine make STANKO type 2 A 554Machine -No: 7837Technical specifications:Drilling capacity i. Full ST 4 50 mmThread cutting ST 4 M 52Projection: 1600 mmSpindle mount: MK 524 speeds: 18-2000 rpm.24 feeds: 0.045 - 5.0 mm / minColumn diameter: 315 mmDrive power: 9.0 kWDimensions L x W x H: 2850 x 1030 x 3430 mmWeight approx: 4700 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Drilling and milling machine make WOTAN type B 75 TFabr. -No: 58252 Year of construction 1965Spindle diameter: 75 mmTransverse travel = X: 800 mmLongitudinal path = Y: 800 mmVertical path = Z: 800 mmSpindle stroke = W: 600 mmDrill spindle inner cone: ISO 40Drilling depth in one go without quick tension: 600 mmwith quick tension: 550 mmVertical adjustment above table: 0 - 800 mm20 spindle speeds: 12.5 x 1000 rpm.Table mounting surface: 800 x 1000 mmSwivel range: 360 °Transverse movement: 800 mmLongitudinal movement: 800 mm27 feed steps: 0.02 - 8 mm / revRapid traverse: 2.4 m / min12 metric thread pitches: 0.5 - 8 mmFaceplate diameter: 420 mmmax. facing diameter: 560 mmMovement of the slide valve: 120 mmFeed range: 0.04 - 16 mm / revDrive power: 9 hpDimensions approx: 3400 x 1800 x 2500 mmWeight approx: 6800 kgWith- 3-axis digital display- Cooling devicedespite the year of construction in ...

Rapid radial drilling machine make GENKO type ATB 30 SYear 1972Drilling capacity i. ST 60:25 mmDrilling assets i. ST 60:32 mmSpindle mount MK 3Quill stroke 150 mmDistance spindle / base smallest/biggest 620 / 1800 mmRadial arm adjustable vert. 1180 mmMovement horizontally on carriage mot.: 1900 mmMovement of the boom hor. 600 mmBoom rotatable by 360 °Spindle head tiltable on both sides up to 45 °14 spindle speeds 22 - 1920 rpm.3 aut. Feeds 0.1; 0.2; 0.3 mm / rev.Drive power 1.5 kWWeight approx 1.5 tExternal dimensions approx 3350 x 700 x 2800 mmWith- aut. feed- hydr. central locking- Tapping device- motor stroke movement- central hydr. clamping- motorized travel = 1900 mm on base carriageused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ple ...