mm used for sale

General SKU408X1222 LocationBarneveld CEcheck MakeBusch Pressure Working pressure0.06 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume105000 Ltr. Motor5 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity105 m³/h With motor2,8 kW (400 V 2925 rpm) MakeRuvac Oerlikon TypeWAU 501 Mach.No.31001371139 Year of construction2016 With motor2,2 kW (400 V, 2890 rpm) InletDN50 OutletDN30 Information TypeMink MM 1102 BV Mach.No.120069079 Year of construction2012 Mounted on framecheck With switchcheck Floorspace1,30x1,05 m Total height2,00 mVacuum pumpsBuschPumps > Vacuum pumpsBrand > Busch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

- Useful capacity of product tank: 50 litres, - Total capacity up to the rim of the tank: 80 liters, - Service suppression in the product tank: -1/+2,0 bar, - Maximum temperature in the product tank: 125 °C, - Service suppression in the double envelope: 4.0 bar, - Maximum temperature in the double enclosure: 140 °C, - Stainless steel: 1.4435, - 1350 Kg, Variable speed of motors:, - External mixer arm: 11-44 rpm, - Internal shaft mixer: 21-84 rpm, - Homogeneizer: 1150-4350 rpm, Volume: 80 litres , Useful volume: 50 litres , Hustle: 3 types of agitation: outer arm / inner arm / homogenizer , Elec: 380 V / 50 Hz, Cover diameter: 119 mm, Mobile tank: No, Double envelope: Yes, Double envelope volume: 13 litres , Double envelope pressure: 4.0 bar , Weight (kg): 1350

Costarelli D1300 fully automatic agglomerator, 315 kW drive, was processing LDPE, can be used for film, fibers, fluff, light abd voluminous plastic materials to massive volume reduction., throughput rate around 1 Ton per hour, depending on moisture and material, including : loading conveyor belt, feeding belt, barrel diam.1.300 mm., extraction hopper, screw conveyor, roto-classifier, electric cabinet, 400 V 50/60 Hz, CE compliance certificate, electrical drawings, Users manual, Machine in very good conditions, -------------------------------------------------, watch some videos of similar agglomerators in the attached videos, capacity: 1.200 kg/h, conditions: very good, type: 1.300 mm , Totale power needed for this line: around 500 KVA, including belts, classifier, screws., Including: loading conveyor belt

sheet width: 1000 mm plate thickness: 3,0 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,47 t dimensions of the machine ca.: 1,7 x 0,8 x 1,35 mm Sheet metal bending machine with custom dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swiveling top roller - Brake motor - Safety device: Emergency stop cord - Documentation in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sack bucket Aluminium ALU Weighing scoop Flour scoop 255 mm  ( 2 pieces )Polished die-cast aluminiumTotal length approx. 255 mmWeight approx. 136 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

Shovel Aluminium ALU Weigh scoop Flour scoop 335 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 335 mm500mlWeight approx. 262 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Shovel Aluminium ALU Weigh-in Bucket Flour Shovel 265 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 265 mm285mlWeight approx. 120 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Shovel Aluminium ALU Weigh scoop Flour scoop 250 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 250 mm250mlWeight approx. 98 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Baking Plate / Stone Plate / Oven Plate for Miwe Condo 1225x815x13mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 1225 mm x 815 mm x 13 mm Thickness 13mm Weight 25kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding agent from 10 pieces on request 

Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: CSM -Pump type: -Digital clock: Type SPG-DIGI-B0400-B -Power: 0.55 kW 1360 rpm -Dimensions: 550/360/H380 mm -Weight: 34 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 106.38 -Drive motor: with frequency converter MM03D-503-00 -Speed: 13 - 2.6 rpm -Power: 0.37/0.075 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 490/290/H190 mm -Weight: 26 kg/pc.

Baking plate / stone plate / oven plate for quail Piccolo 600x865x15mm NEWBack plate / stone plate for quail Piccolo oven dimensions: 600 mm x 865 mm x 15 mm thickness 15mm Weight 16kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 44.46 -Drive motor: with frequency converter MM03D-503-00 -Speed: 31 - 6.3 rpm -Power: 0.37/0.075 kW -Shaft: Ø 25 x 50 mm on both sides -Protection rating: IP54 -Quantity: 1x geared motor available -Price per piece -Dimensions: 470/290/H210 mm -Weight: 26kg

gear motor, electric motor, electric gear motor -Manufacturer: CEG, gear motor -Speed: approx. 100 rpm -Engine: CEG Type MM63B4-STDT -Power: 0.22 kW / 1200 rpm -Hollow shaft: Ø 18 x 65 mm -Design: B14 angle -Protection class: IP 55 -Number: 3x engines available -Price: per piece -Dimensions: 320/170/H170 mm -Weight: 7.1 kg/piece

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SA37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 105 mm -Protection rating: IP54 -Dimensions: 360/250/H200 mm -Weight: 14.8 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SA37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 360/250/H190 mm -Weight: 14.0 kg

Geared motor, electric motor, electric geared motor, spur geared motor, frequency-controlled geared motor, adjustable geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, adjustable geared motor -Type RF07 DRS71S4/MM03 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 25 to 280 rpm / i= 11.18 -Power: 0.37/0.074 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 360/250/H180 mm -Weight: 10 kg

Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake, frequency-controlled geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, variable speed geared motor with brake -Type R17 DT71D4/BMG/MM05 -Drive motor: with Movimod frequency converter -Speed: 290-64 rpm / i= 4.51 -Power: 0.055/0.55 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Brake: 5 Nm -Number: 3x motors available Price: per piece -Dimensions: 430/145/H200 mm -Weight: 15 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, electric geared motor without gearbox -Type SA37 DRS71S4/MM07 -Drive motor: with frequency converter MM07D-503-00 -Motor speed 2900/597 rpm -Power: 0.55/0.055 kW -Shaft: Ø 10 -14 mm, spur gear see photos -Protection rating: IP54 -Dimensions: 240/186/H245 mm -Weight: 8.4 kg

Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 -Measuring height: 490 mm -Technical data: see photos documentation -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm -Total weight: 218 kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Manufacturer: SEW-Eurodrive, gearmotor with integrated frequency inverter with brake -Square gear unit: F series -Type: FH67BDT71D4/BMG/MM03/RA1A/KPF6 -Speed: 1.2-6.1 rpm -Power: 0.075/0.37 kW -Protection class: IP54 -Hollow shaft: Ø 40 x 210 mm -Brake: 5 Nm -Number: 4x motor available -Price: per piece -Dimensions: 425/280/H330 mm -Weight: 44 kg/piece

CNC control unit, power supply, switching power supply, servo module, control unit, Pro module, controller, compact control -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-DX1 / LE4-116-XD1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg

CNC controller, power supply, switching power supply, servo module, control unit, Pro module, controller, compact controller, PLC controller -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-XD1 / LE4-116-DX1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (right) Max. feed length: 4,500 mm Pneumatic parking brake

Manual length adjustment via hand slider For mounting on any Elumatec single-head saw (right) Max. feed length: 3,000 mm

X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuri ...

2010 MMM Selectomat PL 669-2 HL Sterillizer + 2008 Miele PG 8528 2017 MMM Selectomat PL 636-1 CL Sterillizer in great condition. Find more here - / Contact us at -

A CNC vertical machining center by Saeilo requiring repair is available. Travel X/Y/Z: 1120mm/700mm/700mm, table dimensions X/Y: 1200mm/700mm, max. table load: 1000kg, spindle nose to table distance range: 100mm-800mm, tool holder: SK40, power: 16.5kW, tool stations: 30, rapid traverse: 20m/min, feed rate: 15m/min, positioning accuracy: +/-0.005mm, repeatability: +/-0.003mm. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2650mm, weight: approx. 7800kg, control: Heidenhain, operating hours: approx. 50550h, spindle hours: approx. 13000h. The machine geometry must be checked. Furthermore, the tool changer is sticking, leaking oil and the lighting has defects. Documentation available. An inspection on site is possible.

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (right) Max. feed length: 4,500 mm Pneumatic parking brake

Product information \"Handheld Control Unit MMI - Inveor M\" Suitable for: Inveor M frequency inverter Function: Simple configuration of all parameters of a frequency converter Inveor M via a handheld control unit. The MMI is an alternative to PC software for commissioning, Parameter adjustment and service purposes. This allows parameters to be edited, saved and set points to be specified Auction-ID: A1-48483-73

FSA Combined MIG/MMA Welding Machine MIG Shielded Gas Welding 30 - 315 A MMA Electrode Welding 10 - 200 A MIG burner hose 2 m Mass clamp 3 m Reducer Electrode holder Weight approx. 40 kg

Motor control, drive converter, frequency converter, inverter SEW MoviMot MM05C-503-00 8241163 up to 0.0.00 55 kW 380 - 500 V with field distributor MFP21D/MM03c-503-00/Z27F 1 and connection unit MFZ27F 1 8244286 Dimensions: 330 x 175 x 125 mm

Centering Vise, Centric Clamp PAGUS Jaw Width: 100 mm Jaw Height: 55 mm Wingspan e: 0...70 mm can be rotated on carriage with millimeter scale - 70 - + 70 mm on a rotary table with graduation: - 90° - + 90° 360° rotatable ! used, tested ! Dimensions: 270 x 270 x 140 mm

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: HG, Manometer 0 - 0.016 bar, unused, original packaging -Type: Ø 160 mm 0-160 mmWs -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/180/H50 mm -Weight: 1.6 kg.

BARTSCHER MME102D, S/N 100140917, 3x 400 V/50 Hz, 12.6 kW, 10 shelves 60x40 cm, rollable base, 2 controllers are missing

Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-48486-40

Rated Input Voltage: 3P AC380V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 85% Insulation class: F Protection class: IP21 Weight: 43 kg Insulation value: F Protection value: IP21 MIG TIG MMA - Input power (KVA) 13.8 10.5 11.8 - Input current (A) 21 16 18 - No-load voltage (V) 80V 80V 80V - Output current (A) 40-350 10-350 30-300 - Output voltage (V) 31.5 24 32 Auction-ID: A1-40285-133

Please note! This car has a wok notification Viewing by appointment Auction-ID: A1-40285-23

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools Auction-ID: A1-40285-129

For precise dosing and mixing of liquid plastics Auction-ID: A1-48722-116

Professional Hydraulic Pressure Former Own weight: 59Kg Power supply: 220V Output: 1500Watt Working pressure: 4.1 bar Tank pressure: 12 bar Frequency band: 2.4GHz Max radio power: 21dBm Working diameter: 380 mm(W) x 160mm(H). Not yet used after purchase. Auction-ID: A1-47356-99

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-48621-294

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-48622-294

Micromill Challenger MM430 machining center Year of construction 2013 Type: Vertical machining center (3-axis) Control: FAGOR 8055 Tool changer: 16-fold Spindle: 8,000 rpm Travels: X-axis: 760 mm Y-axis: 430 mm Z-axis: 390 mm Table: Table size: 900 × 410 mm Table load: 350 kg Spindle: Tool holder: SK40 / ISO 40 Speed: max. 8,000 rpm Spindle power: approx. 5.7 kW (continuous) approx. 7.5 kW (max.) Tool Changer: Number of tools: 16 Max. tool diameter: 100 mm Max. tool diameter (with free spaces): 130 mm max. tool length: 200 mm Max. tool weight: 8 kg Tool change time: approx. 10 s Feed / Rapid Traverse: Feed: approx. 10 m/min Rapid traverse: 24 m/min Machine data: Connected load: approx. 15 kVA Machine weight: approx. 3,000 kg Dimensions (L × W × H): approx. 2,200 × 2,000 × 2,400 mm Equipment: 3-axis CN ...

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-48622-243

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-48621-243