mm used for sale

Inclined lift trailer make Böcker type Piccolo 20 / 0-4Fabr. -No: 27470, built in 1996Load capacity: 200 kgextendable from: 5.14 - 20.10 mRope diameter: 6 mmEngine type: motorhydaulischEngine: HondaDrive power - petrol engine: 8 kWWeight approx: 840 kgTotal length approx: 6540 mmbuilt on single axle trailerWith- slack rope safety- Slewing ring can be locked in three positionsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic scissor Lift Fabr. VEB TakrafCapacity: 3000 kgPlate size: 2500 x 800 mmPlate height: 185 mmMax. Lifting height: 1060 mmHeight lowest state: 550 mmEngine power: 2.2 kWMax. Pressure: 100 barColor whiteWith- mobile on wheels- each 5 clamping eyelets right and left on the plateused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi-turn lathe make HAHN & KOLB type TORNOMAT 2Masch. -No: 668273 Year 1973Working area hexagonal: 3 - 36 mmWorking area 4-edge: 3 - 24 mmhydr. Feed per revolution: 0 - 0.5 mmRapid traverse: 3.7 m / min.Switching time: 1.0 sec.Speed of the rotor: 250/355/450 rpm.Speed of the spindle: 2250/3200/4050 rpm.Drive power: 2.2 / 1.5 kWWeight approx: 1.25 tOutside dimensions approx: 670 x 1530 x 1220 mmWith- Electric control cabinet- Accessories and tool cabinet complete with content- Cabinet with collets- conveyor beltused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile work platform make EIFEL type E III 1Fabr. -No: 7102 built in 1979Payload: 300 kgLifting height: 7.2 mWorking height approx.: 9,0 mPlatform size: 1000 x 1200 mmStand area: 1700 x 1100 mmEngine power: 1.5 kWTotal length chassis: 2750 mmWeight approx.: 680 kgused..Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

High precision turret lathe manufactured by SCHAUBLIN type TR 102 HPMasch. -No: 167073, year of construction 1966controlled hydropneumaticallyTechnical specifications:Tip height: 102 mmBed length: 900 mmDistance between headstock and turret: 300 mmCollets passage: 22 mmNumber of places in the revolver: 6Bore diameter: 20 mm6 spindle speeds: 840 - 3000 rpm.Feed rates: 0.02 - 2 mm / minFast delivery: 8 m / minrequired air pressure: 5 - 7 atmAir consumption: 5 - 10 m3 / hDrive power: 2.5 HPWeight approx: 670 kgExternal dimensions: 1930 x 590 x 1680 mmWith- Collet insert- bar feed- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO ...

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2728-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic scissor lift manufacturer WMW type HT 20500Masch. -No: 16 built in 1990Load capacity: 2000 kgTable size: 2500 x 1250 mmLifting height: 1600 mmHeight: 440 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2729-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Scissor lift table make SAX LIFT A / S type IL 1000 SB-STechnical specifications:Load: 1000 kgUseful stroke: 1050 mmConstruction height: 250 mmMax. Height: 1300 mmLifting time: 34 secSize of the usable area L x W: 2800 x 1000 mmDrive power: 1.1 kWWeight approx: 300 kgWith- Hand switch with up / down- emergency stop- safety bar- railings- Platform with checker plateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric construction hoist type BoyManufacturer No .: 36817 Year 1994Load capacity: 150 kgHead: 40 mRope diameter: 4 mmNominal strength: 1960 N / mm2Power: 0.85 kWCurrent type: 220 V / 50 HzWith- Control cable and bottle- storey supportused, from an operational resolutionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Post turning machine make FEINBAU type PM 1-HUBFabr. -No: 3473Tip width: 165 mmTop height: 110 mmgr. circulation diameter over bed: 220 mmover cross slide: 110 mmSpindle bore: 23 mm3 spindle speeds by directly on theSpindle drive motor: 690/1380/2850 rpm.Drive motor 380 V,: 690/1380/2850 rpm.: 0.22 / 0.37 / 0.5 kWSpace required: 400 x 830 x 1170 mmWeight: 160 kgused, from a service release, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turning Device / Load Turning Device / Tool Manipulator Fabr. KS-KABELSCHLEPPYear of construction 1988Capacity: 12 tSpeed: 4.2 m / minAcceleration: 0.2 m / sBelt width: 120 mmLength and thickness of the belt depend on the load to be usedDimensions L x W x H: 4293 x 1900 x 1000 mmDrive power: 2 x 1.1 kWDead weight: 2680 kgWith- Cable drum HK KTN 220 / 251Sused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tiller-guided lift truck make SCHEFER type 1101030SpecialMasch. -No: 12011904-1 / 013 year of construction 2012Max. Lifting capacity: 1.0 tLifting height: 166 mmFork width: 160 mmFork length: 2500 mmWeight approx: 180 kgWith- CE markused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turret Lathe Fabr. HARDINGE Type HCT 3Machine -No: EC 2270Top height: 170 mmTurning length: 240 mm16 spindle speeds: 125 - 3000 rpm.stepless slide feed: 0 - 100 mm / min.Drive power: 1.5 hpExternal dimensions approx: 1900 x 800 x 1600 mmWith- Collet device- Three-jaw lathe chuck 125 mm- 6-fold revolver slide- 8-fold revolver stop- Abstechschlitten- 48 collets up to max. 28.5 mm- Cooling device- R + L runvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vacuum lifter for wood make FEZER type Vacofix 274700Machine No: 83355 Year 1987Load capacity: 360 kgCarrying length: 5000 mmDead weight: 480 kgDimensions approx .: 5000 x 1800 x 700 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe and flange lathe make WISCH type RA 8-36Mash. -No: 9-3430light construction site machineTurning diameter: 80 - 400 mmClamping diameter: 80 - 365 mmminute Clamping length: 190 mmTool speeds: 11.3 / 22.6 rpm.Radial feed: by hand / by camMax. Travel: 95 mmFeed rates: 0.166 / 0.33 mm / rev.Axial feed: by handMax. Travel: 55 mmMax. Turning length for external turning work: 40 mmMax. Turning length for internal turning: 30 mmDrive power: 0.8 / 1.2 kWSupply voltage: 380 V / 50 HzDimensions approx L x W: 775 x 760 mmHeight above center (without carrying hook): 210 mmHeight below center: 320 mmTotal height: 530 mmWeight approx: 74 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your q ...

Gear milling machine / gear hobbing machine make NILES type RF 6 M 15Lizensbau Pfauter Chemnitz, year of construction unfortunately not visibleTechnical specifications:Wheel diameter to be milled for spur gears: 1500 mmmax. Milling to be milled: 15 Mod.Range of helical gear drm. at10 ° spiral approx.: 1500 mm20 ° spiral approx.: 1500 mm30 ° spiral approx: 1350 mm40 ° spiral approx.: 1060 mm45 ° spiral approx: 900 mm50 ° spiral "750 mm60 ° spiral approx.: 450 mmBurr turns per minute: 20-26-33-43-56-71-90-118gr. Outer diameter of the milling cutter: 200 mmDrm. Milling mandrels: 27-32-40 mmDrm. of the workpiece clamping mandrel: 60 mmRotation of the drive pulley on the machine per minute: 520Drm. the drive pulley on the machine: 500 mmWidth of the drive pulley on the machine: 130 mmPower requirement: 10 hpRotation of the engine: approx. 1000 rpmExternal dimensions of the machine: 320 ...

Metal Lathe make COLCHESTER Type Master 2500 / 165x1000Fabr. -No: MCH No 5/0009/07505, year of construction 1979Tip width: 1000 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle bore: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric thread pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametrical pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFeed rates: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 890 kgWith- 3- jaw chuck diameter 200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

Horizontal belt sander Italian makeBandwidth: 130 mmPad size: 500 x 130 mmDrive power: 0.9 hpPower connection: 380 V, 50 HzDimensions L x W x H: 800 x 400 x 1000 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal Lathe Fabr. WEILER Type Condor VSMasch. -No: 9127 built in 1979 with preselectionCenter height: 155 mmTip width: 800 mmGr. circulation diameter over bed: 320 mmxa0xa0xa0 via support slide: 170 mmSpindle bore: 38 mmMounting taper of the tailstock quill: MK 317 spindle speeds: 12 - 2800 rpm.60 feeds along: 0,037 - 1,253 mmxa0xa0xa0 plan: 1/2 of the longitudinal feeds35 metric thread pitches: 0.35 - 12 mm40 inch thread: 45 - 2 Gg / 25 module thread: 0.2 - 4 module32 diametrical pitch threads: 5 - 90 DPDrive motor: 380 V, approx. 3 kWDimensions L x W x H: 700 x 1830 x 1260 mmWeight approx: 815 kgWith- compl. electrical device- Lighting- Coolant device- Quick change tool holder Multifix m. morexa0xa0 steel holders- Three - jaw chuck Forkhardt 200 mm Drm.- Tool cabinet with contentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net a ...

Flat belt grinding machine make MAFAC type NT 300 SFabr. -No: 417643 Year 1986Tape dimensions: 2000 x 300 mmBelt speeds: 6, 8, 10, 12, 16, 20 m / srequired air pressure: 5 - 6 barDrive power: 9.3 kWDimensions L x W x H: 1440 x 1200 x 2047 mmWeight approx: 500 kgWith- Table motorized vertical and horizontal- wet grinding device- pneum. belt tension- Deburring and chamfering deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Contact grinding machine / contact belt grinding machine make SOLDER type KS 350Make -No: 1520Sanding belt length: 3500 mmGrinding belt width: 5 - 75 mmDrive disc Diam: 180 mmBelt speed: 13.5 + 27 m / minDiameter of the pipes: 3 - 180 mmFeed rate: 0 - 25 m / minDrive power: 3.2 / 4 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table Universal after Lathe Fabr. SEE Type RAPIDCenter height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzWeight approx: 100 kgDimensions approx: 850 x 400 x 350 mmWith- without base- Three-jaw chuck 125 mm- clamping clawused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Belt sander, make UNKNOWNTechnical specifications:Band width: 40 mmSupport table: 400 x 265 mmExternal dimensions: 550 x 700 x 1500 mmWeight approx: 80 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal Lathe Make COLCHESTER Type Master 2500Fabr. -No: MCH No 5/0007/05812, built in 1977Tip width: 635 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle hole: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametral pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFlat feeds: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 855 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal turning machine make LIEBER type SS / VO / EVYear of construction 1974 with movable upper bed and electrical preselection controlTechnical specifications:Center height: 500 mmTip width: 2500 mmTurning diameter over bed: 1000 mmTurning diameter over cross slide: 750 mmSwing diameter in the crank: 1650 mmCamber length infinitely adjustable: 0 - 1500 mmSpindle bore: 101 mm12 spindle speeds: 6 - 600 rpm.Bed width: 640 mmBed slide guide length: 1020 mmSlide gate width: 350 mmUpper support width: 250 mmUpper support path: 250 mm132 longitudinal feeds: 0,051 - 4,876 mm / min.132 flat feeds: 0.027 - 2.688 mm / min.Gewindevorschübe: 66metric threads: 0,785 - 24 mmWW thread: 1.5 - 46 Gg / 1 Tailstock: MK 6Motor power: 15 kWExternal machine approx: 5000 x 2200 x 2300 mmWith- sliding bed- electrical preselection control- Faceplate Drm. 1600 mm- Leadscrew is missingusedPrice on request.Deliver ...

Wet three-roller belt grinding machine make LÖSER type KS 355Machine -No: 503Technical specifications:Abrasive belt length: 3500 mmMax. contact roller width: 120 mmContact washers: 200 x 80 mmNumber of contact rollers:3Power connection: 380 V / 50 HzDrive power: 2.2 kWWith- Wet grinding device- Sanding belt with one sanding position- pneumatic belt tensionusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double grinding machine / double grinding block make REMA type DS 30/400 AFabr. -No: 02703 with built-in extractionGrinding wheel size 400 x 40 x 127 mmGrinding wheel speed 1450 rpm.Drive power 3 hp - 2.2 kWFlow rate 10 m3Power connection 380 V, 50 HzWeight approx. 240 kgDimensions 960 x 732 x 1188 mmWith- built-in suction- Standard versionused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double tool grinding machine make REMA type DS 12/250 WFabr. -No: 077030Grinding wheel size: 250 x 40 x 51 mmGrinding wheel speed: 1450 rpm.Table size: 165 x 180 mmDrive power: 0.73 kWDimensions L x W x H: 900 x 800 x 1100 mmWith- wet grinding device- right tiltable table- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metall lathe manufactured by PINACHO type L-1/165Masch. -No: 11782Technical specifications:Tip height: 165 mmDistance between centers: 750 mmTurning diameter over bed: 330 mmTurning diameter in the crank: 480 mmSpindle bore: 42 mmSpindle mount: DIN 55022/518 spindle speeds: 30 - 2000 rpm.20 feeds: 0.047 - 0.86 mm / rev20 cross feeds: 0.021 - 0.39 mm / rev20 metric threads: 0.5 - 916 WW threads: 56 - 4 Gg / 1 20 module thread: 0.25 - 4.5 MDrive power: 2 / 3.8 HPDimensions: 1645 x 820 x 1260 mmWeight approx .: 800 kgWith- Three-jaw lathe chuck 200 mm- Multifix steel holder with multiple inserts- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Double grinding block make METABO type DS 7207 WFabr -No: 53037908Grinding wheel size: 175 x 25 x 32 mmelectrical connection: 230VMax. Engine speed: 2800 rpm.Grinding wheel speed: 2 - 30 m / minDrive power P1 / P 0.43 / 0.30 kWProtection class: IP 42Color greenWith- 2 pink grinding wheelsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make MYFORD type Super 7Technical specifications:Distance between centers: 330 mmTip height: 84 mmBed width: 76 mmSpindle bore: 15.5 mmTurning diameter over support: 98 mmInfeed per division: 0.02 mm12 spindle speeds: 25 - 2150 mmThread pitches metric: 0.2 - 3.5 mmThread pitches inch: 8 - 28 Gg / 1 Feeds: 0.1 - 0.25 mm / rev.Fine feeds: 0.009 - 0.004 mmDrive power: 0.9 / 0.52 kWWeight approx: 53 kgExternal dimensions approx: 910 x 660 x 400 mmWith- Four-jaw lathe chuck- Set of change gears- steel holder- drill chuck- mitl. Center point- Tapered roller bearings in the main spindleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

Double grinding block make REMA type DS 30/350 WMash, -No: 02720Grinding wheel speed: 1450 rpm.Slice size: 350 x 40 x 76 mmDrive power: 2.2 kWDimensions approx: 1080 x 600 x 1200 mmWith- Underframe- Cooling device- 2 tiltable tablesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make WMW Karl-Marx-Stadt type DLZ 355 x 1600Fabr. -No: 2410/60, built in 1960Technical specifications:Technical specifications:Turning length: 800 mmCircumferential diameter over bed: 355 mmCenter height: 180 mmSpindle bore: 35 mmTailstock tip taper: Morse 4Quill shift by hand: 140 mmTailstock shift of the upper part from the central position: 10 mmWorkpiece weight between the steadies: 630 kgbetween the tips: 400 kg18 spindle speeds: 18 - 2500 rpm16 feeds length: 0.071 - 1 mm / rev16 cross feeds: 0.036 - 0.5 mm / revmetric thread 16: 0.5 - 7 mmInch thread 28:60 - 4 turnsModule thread 1 0.25 - 3.5Main drive: 5.8 kWExternal dimensions: 2200 x 1060 x 1225 mm highWeight: 1900 kgWith- three-jaw chuck- Steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding.  ...

Metal lathe make TOS type SV 18 RAMachine -No: 018100830833, year of construction approx. 1980Technical specifications:Distance between centers: 1000 mmCenter height: 180 mmCircumferential diameter over bed: 380 mmCircumference diameter over support: 215 mmSpindle bore: 41 mmSpeed range: 14 - 2800 rpm.Longitudinal feeds: 0.02 - 5.6 mm / revFlat feeds: 0.01 - 2.8 mm / revmetric pitches: 0.2 - 140Inch thread: 1/5 - 140/1 DP thread: 1 - 224 DFModule thread: 0.2 - 70 M.Drive power: 6.0 kWDimensions approx: 2200 x 1000 x 1400 mmWeight approx: 1800 kgWith- Steel holder- three-jaw lathe chuck- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wa ...

Grinding and belt grinding machine make METABO type 7732DFabr -No: 799930Wire brush right: Drm. 400 mmBelt grinding arm left: belt width 50 mmEngine speed: 1430 rpmDrive power: 1.5 kWPower connection: 380 V, 50 HzWith- Underframe- Wire brush and belt sanding armused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make GRAZIANO type SAG 210Technical specifications:Distance between centers: 1000 mmCenter height: 210 mmCircumferential diameter over cross slide: 268 mmCircumferential diameter in the crank: 580 mmSpindle bore: 57 mmBed width: 330 mmLength of the offset with the driving flange: 316 mm24 spindle speeds: 38 - 2000 rpm.80 longitudinal feeds: 0.020 - 0.44 mm80 cross feeds: 0.010 - 0.22 mm40 WW thread: 46 - 340 metric pitches: 92 - 640 module thread: 0.25 - 2.875 mod.Leadscrew pitch: 3/8 Rapid traverse: 6000 mm / minDrive power: 7.5 kWDimensions: 2700 x 1400 x 1370 mmWeight approx: 2270 kgWith- three-jaw lathe chuck- Multifix steel holder with several inserts- fixed bezel- moving center point- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Error ...

Double grinding block make ELEKTRA BECKUM type SL 200Year of construction 1989Grinding wheel size: 200 x 40 mmSpeed: 2830 rpm.Drive power: 1.1 kWPower connection: 380 V / 50 HzWith- Knife sharpener length 800 mm- Knife sharpening device adjustable in anglevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Draw spindle precision lathe Fabr. WMW Mikromat Dresden Type DZFG 200 x 500Fabr. -No: 7960, year of construction approx. 1986Technical specifications:Tip width 500 mmTop height 165 mmgr. circulation diameter over bed 315 mmGr. orbital diameter over cross slide 200 mmTurning length between the tips 560 mmgr. workpiece diameter for bar work 31 mmGr. chisel cross section 20 x 20 mmPassage of fixed set stick 100 mmPassage of the walking stick 70 mmgr. workpiece mass between the tips 50 kg9 spindle speeds 56 - 2800 rpmRotary feeds with increments of 1.25xa0xa0xa0longitudinal 0.02 - 0.8 mm / revxa0xa0xa0plan 0.02 - 0-4 mm / revThread feeds metric thread lengthwise 0.2 - 60 mm / revxa0xa0xa0plan 0.2 - 30 mm / revInch thread lengthwise 60 - 1/2 Gg / xa0xa0xa0plan 60 - 1 Gg / Module thread lengthwise 0.1 - 28 mm / revxa0xa0xa0plan 0.1 - 14 mm / revDiametrical pitch thread lengthwise 240-1 3/8 Gg  ...

Bench GrinderGrinding wheel size: 300 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 751Serial -No: 84119, year of construction 1984Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 245 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 5 m/minTravel per handwheel rotation Position 1/ 25.5 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely variable speed: ...

Metal lathe make MEXPOL / PONAR type TUR 50 SMachine -No: 45499 built in 1985Technical specifications:Distance between centers: 1000 mmCenter height: 250 mmCircumferential diameter over bed: 500 mmCircumferential diameter over support: 300 mmSpindle bore: 80 mmShort cone: size 836 spindle speeds: 18 - 1800 rpm.42 feeds lengthways: 0.64 - 26 mmacross: 0.32 - 13 mmMetric thread pitches: 42Inch thread: 42Diametrical pitch thread: 42Machine weight: 2720 kgRequired space approx .: 2500 x 1300 x 1630 mmWith- Acu-Rite digital display- three-jaw lathe chuck- faceplate- 4-way steel holder- 1 steady rest (fixed)- 1 moving center punchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your querie ...

Double sanding block make GISAG Leipzig type SE 2x400Machine -No: 43571, built in 1974Grinding wheel size: 400 x 50 mmSuction nozzle diameter: 115 mmMax. Peripheral speed of grinding wheel: 45 m / secConnected load: 4 kWelec. Connection: 380VExternal dimensions: 1050 x 600 x 1150 mm highColor greenWith- 2 grinding wheels- 1 suction nozzle per grinding wheelused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double bench grinder manufactured by VEB Leipzig type DS 200/2-No: 399259Technical specifications:Grinding wheel size: 200 x 32 mmMax. Speed: 3000 rpm.Power consumption: 900 W.electrical connection: 220/380 V, 50 HzWeight: 19 kgWith- 2 grinding wheels- baseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plan copy lathe make RAVENSBURG type K 600 KHKom. -No: 8792 built in 1972Technical specifications:Turning diameter over bed: 1000 mmTurning diameter over facing slide: 600 mmfor face plates up to: 800 mm dia.max.distance between faceplate and support: 600 mmLongitudinal feed: 1 - 170 mm / minPlan feed: 1 - 170 mm / minMain spindle diameter: 166.68 mmSpindle bore: 80 mm12 spindle speeds: 1.7 - 600 rpm.gr. torque on the faceplate: 500 mkggr. workpiece weight: 500 kgDrive power: 22 kWWeight approx: 5.8 tExternal dimensions L x W x H approx .: 3500 x 2000 x 2000 mmWith- swiveling control panel- separate control cabinet- hydr. Copier- Thyristor drive- separate hydraulicsWITHOUT the lining shown!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

Double grinder make REMA type DS 45/500in standard designTechnical specifications:Grinding wheel size: 500 x 60 x 127 mmGrinding wheel speed: 950 rpmDrive power: 3.3 kWDimensions: 1260 x 850 x 950 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Facing lathe make HEYLIGENSTAEDT type 405 EVMachine -No: 581242229/189623 Year of construction 1965 with sliding upper bedTop width: 1750 mmTop height from the underbed: 405 mmTurning diameter over bed: 810 mmTurning diameter over bed slide: 620 mmTurning diameter in the crank: 1500 mmLength of the offset in front of the faceplate: 750 mmCamber width: 0 - 400 mm18 spindle speeds: 9 - 450/14 - 710 rpm.42 feeds: 0.09 - 5.6 mm / rev42 flat feeds: 0.045 - 2.8 mm / revFaceplate diameter: 800 mmSpindle bore: 86 mmBed width: 540 mmDrive power: 14 kWDimensions approx: 4000 x 1500 x 2200 mmWeight approx: 6,0 tWith- new main spindle- sliding upper bed- Faceplate Drm. 1200 mm- Faceplate Drm. 800 mm- Multifix steel holder with 3 cassettesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bind ...

Centerless (centerless) cylindrical grinding machine make MAGNAGHI MilanoFabr. -No: 20600, built in 11/1969Grinding length: 130 mmGrinding wheel diameter: 340 mmGrinding wheel width: 120 mmMax. Grinding diameter: 85 mm4 speeds: 18, 24, 34, 250 rpm,Delivery via hand leverExternal dimensions: 1600 x 1200 x 1200 mm highWith- Hydraulics in the machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Centerless cylindrical grinding machine make KÖBAU KÖNIG & BAUER type MultimatFabr. -No: 491889, WA3480Grinding wheel size: 400 x 100 mmRegulator pulley diameter x width: 300 x 100 mm11 speed of the regulating wheel: 10 - 90 rpmDrive power: 15.5 kWDimensions L x W x H: 2000 x 1700 x 1670 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools