ml used for sale

Description Feeding mouth size: 215 x 180 mm Cutting chamber size: 300 x 160 mm Engine power: 3 Kw Rotating Blades: 18 Fixed blades: 2 Grid Hole Size: 6 mm Production: 30/50 Kg/h Material extraction: collection drawer new belts

x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm

complete used multilayer composite pipe extrusion line (PE-AL-PE) suitable for pipes from 10 - 32 mm Includes tools for diameter 16mm Year of construction: 2010 Condition: very good and ready for use!

Weight range: 295 - 455g; With resting station; with pedestal

Weight range: 295 - 455g; With resting station; with pedestal

Material thickness: 0..4-1mm, speed: 0-60m/min, working width: 2200mm, with calibrated length measurement Elovis and spare parts.

Working width: 2200mm, with spare parts.

Rotational speed: 6000/min, weight: 500kg, with controls.

Product number: 2786 Type: MLF600 Serial number: 726 Year of construction: 2001 Belt width: 600 mm Capacity: max. 75 strokes/min. Hopper: 380 litres Compressed air: 6-8 bar, 300 nl/min. Power: 3 x 400V, 50Hz, 23kW Dimensions: 2270 x 1660 x 2550 mm Weight: 1782 kg

turning diameter over bed: 32 mm spindle passage: 32 mm turning length: 450 mm Control: GE FANUC MAIER PRO total power requirement: kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,4 x 1,6 x 2,3 m m Switch-on time: 70,076 hours. Automatic time: 40,135 hours. Counter spindle available (see pictures) Machine was converted for spindle production (see loading magazine), dismantling According to the previous owner, this was easily possible. Machine brings alarms (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number Of Colours: 8 // Printing Width: 1100 mm

Measuring device for muA -30 m to 750 m -approx. 1000 ohms to 5000 ohms -Dimensions: 200/90/H265 mm -Weight: 3 kg

Three-phase motor, electric motor -Handover: in the current state as viewed -Holding foot: damage see pictures -Power: 7.2/12 kW -Speed: 750/1500 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Dimensions: 640/310/H370 mm -Weight: 115 kg

Central lubrication, oil circulation system, progressive pump -The central lubrication comes from: an Okuma LB15 -Performance: 0.3 l/min -Quantity: 1 piece available -Dimensions: 260/145/H290 mm -Weight: 8kg

Specifications: -spindle motor power 22 kW -drive motor power 1.5 kW -saw spindle fi 80 mm x 1300 mm -feed speed 3 - 45 m/min -height of the working table 1120 mm -Max. saw blade diameter fi 280 mm -max. milling depth 22 mm with a saw fi 200 -Max. working width 1300mm -max. workpiece width 1490 mm -min. workpiece length 470 mm max. workpiece thickness 70 mm -suction inlets 2 x 200 mm

Product number: 2837 Type: MLS-3020 Serial number: 4Z0185 Chamber: Ø 300 x 670 mm, 48 litres Sterilization temperature: 105 - 121 °C Pressure gauge range: 0 - 0.3 MPa Power: 230VAC, 50Hz, 2kW Dimensions: 440 x 550 x 1050 mm Weight: 69 kg

Used Filling Monoblock GAI for Cans Year 2020 Introduction to the Filling Monoblock GAI The Used Filling Monoblock GAI model MLE6661 CAN 002 stands out as an advanced solution in automated canning technology Manufactured by GAI in 2020 this machine is renowned for its efficiency and technical precision Technical Specifications Designed for beer soft drinks sparkling water and sparkling wine the machine boasts a production capacity of 2 000 cans per hour Professionals in the sector choose the MLE6661 CAN 002 model for its reliability and high quality filling process Rinsing Component The integrated rinser in the Monoblock GAI features 6 grippers Furthermore its single treatment mode ensures effective can cleaning before filling This step is crucial to maintain the integrity of the final product Filling Component Equipped with 6 valves the filler operates using an isobaric system for preci ...

Label dispenser and printer by laser system. Composed by: -.LASER SYSTEM F9000, for fiber laser engraving, for high precision marking with precise thermal control of 8 selectable and programmable pulse widths. The F-9000 DUO MOPA laser is the perfect tool for demanding and high value applications. -. ILABEL MLA5060, for mechanical peel-off label application. It allows a labeling rate of up to 150 p / min. AVAILABLE DOCUMENTATION LASER SYSTEM F-9000

Label dispenser and printer by laser system. Composed by: -.LASER SYSTEM F9000, for fiber laser engraving, for high precision marking with precise thermal control of 8 selectable and programmable pulse widths. The F-9000 DUO MOPA laser is the perfect tool for demanding and high value applications. -. ILABEL MLA5060, for mechanical peel-off label application. It allows a labeling rate of up to 150 p / min. AVAILABLE DOCUMENTATION LASER SYSTEM F-9000

Label dispenser and printer by laser system. Composed by: -.LASER SYSTEM F9000, for fiber laser engraving, for high precision marking with precise thermal control of 8 selectable and programmable pulse widths. The F-9000 DUO MOPA laser is the perfect tool for demanding and high value applications. -. ILABEL MLA5060, for mechanical peel-off label application. It allows a labeling rate of up to 150 p / min. AVAILABLE DOCUMENTATION LASER SYSTEM F-9000

OMAS model ML16 Monobloc fully automatic machine, constructed in 316L grade stainless steel, Four head inline diving head liquid filling station, positive shut off tips can be used if required. Variable speed 100mm wide slat -band conveyor and infeed/out-feed gating control. Star-wheel transfer of filled bottles to the plugging/ insert and cap placement station supplied from two stainless OZAF vibratory feeders located at the rear of the machine. Bottles then progress to the pre-set torque capping station and then back onto the line conveyor. Separate control panel for all machine functions. It is fully guarded with electrical safety interlock devices on all opening panels. Fill range 50 to 500ml: max bottle dia 65mm: max speed 50 bpm: Installed power 4kw: Approx overall dimensions 2.7 x 1.7 x 2.1m high: weight 1,300kg. Standard nozzles to be supplied to suit clients bottles.

MMG MLL-1 filling machine 2019, built entirely in 316 stainless, doses all kinds of fluids both viscous and dense, you can adjust the volume of the dosing by means of a screen and work with auto activation, being able to regulate the rate or frequency of dosing. Product reception jacketed hopper which can be used to heat or cool the product, electric panel with PLC and anti drip system. Doses from 100g - 1000Kg. Piston works with a servo-motor. Hopper also has agitation for faster filling

Stock number: 3876 WELDING TURNTABLE Manufacturer: ESAB, Type: MLA 500 Machine NO.: 414767 Specifications: Large workpiece weight 500 kg Infinitely variable table rotations. pr/min Horizontal / Vertical Length: 1200 mm, Height: 800 mm, Width: 800 mm, Weight: 500 kg

Description: Longitudinal travel of upright X 10,000 ,mm Spindle head vertical travel Y 3,300 mm RAM transverse travel Z 1,100 mm Spindle quill travel W (boring bar) 800 mm Translating travel C 2,000 mm Turntable plate positions B 360,000 n Turntable size 2,700 x 2,700 mm Drilling unit vertical travel V 2,700 mm Drilling unit transversal travel U 500 mm SELCA S4045PD control Serial number 02-021.021 Dig depth 2000 mm z-motion: 1,200 mm, table surface area l x w : 2700 x 2700 mm, control: SELCA 4045PD, power capacity - spindle: 50 kW, weight approx.: 160,000 kg, Approx. Onsite Dimension. (l x w x h): 19,000 x 10,000 x 6,000 mm

Description: control: SIEMENS Simatic OP37  , total power: 38 kW rated current: 52 A  , cleaning machine 1: manufacturer: KRAINTEK type: RM YOM: 2018 power: 3 kW  , cleaning machine 2: manufacturer: KRAINTEK type: RM YOM: 2018 power: 3kW total power requirement: 38 kW, Approx. Onsite Dimension. (l x w x h): 5,500 x 8,000 x 4,000 mm, weight approx.: 15,000 kg

Automatyczna maszyna do zamykania butelek w zakresie pojemności od 250 ml do 6000 ml dla każdego rodzaju nakrętek wykonanych z aluminium lub tworzywa sztucznego. W chwili obecnej maszyna jest przystosowana do zakręcania butelek PET z popularną nakrętką 38 mm, a po dopasowaniu gwiazd do konkretnego pojemnika, maszyna może zakręcać dowolne butelki z gwintem 38 mm (popularne soki, napoje lub produkty mleczne). Po zmianie głowic zakręcających może być używana przy zakręcaniu nakrętek w dowolnych butelkach z dowolnym rodzajem gwintu. Wydajność dla mniejszych formatów wynosi: od 1000 do 9.000 but/h Maszyna posiada płynną bezstopniową regulację szybkości i wydajności. Min./max. średnica butelki: fi 30 mm / fi 150 mm Min./max. wysokość butelki: 100 mm / 360 mm Ilość głowic magnetycznych: 6 szt Rok produkcji: 2010 Moc całkowita: 3,37 kW Wymiary masz ...

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

BLISTER MACHINE FOR AMPOULES FARCON FC320 WITH VISION SYSTEM SEA VISION For thermoforming trays for ampoules, vials. Manufacturer: Farcon (MARCHESINI GROUP) Model: FC320 Year: 2002 Automomatic ampoules feeder on trays Pick and place system to pick up trays and place them on a conveyor Two-way conveyor Maximum forming depth: 42 mm Speed: 45 cycles/min Maximum forming area: Film width 254 mm; Film pitch 220 mm Maximum cutting area: Film width 248 mm; Film pitch 210 mm Maximum production: 63000 ampoules (1 ml)/h Hydraulic network: - Pressure : 1.5 to 2 bars - Connection : Ø 1/2" Gas - Temperature : 11°C to 15°C - Average consumption : 200 l/h Pneumatic network: - Pressure: 6 to 8 bar - Connection: Ø 3/4" - Consumption: 500 Nl/min Power supply: 400V 3-phase, 50Hz, 3A Power: 6kVA CARTONER CAM MODEL HV2 FOR AMPOULES Model: HV2 ...

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

welding power: 30 - 290 A (stufenlos) welding power: ED 60% 175 A Wire thickness: 0,6 - 1,2 Stahl mm Wire thickness: 1,0 - 1,2 ALU mm voltage: 400 V weight: 67 kg LORCH authorized trader - other models on request Description: Automatic setting With the help of the automatic adjustment of the wire feed speed The Lorch M 304 supports you with the selected voltage level Finding the perfect working point. Quality wire feeder The Lorch M 304 comes with a 4-roller wire feed as standard Robust housing due to its compact and robust You can easily place your Lorch M 304 under the housing with sturdy wheels Stow away the workbench or use the top of the machine as a storage area. Double gas bottle lock For optimal safety, the Lorch M series has a double Gas bottle lock. So you can move your power source safely. Furnishing: - Integrated 4-roll wire feed - ML2500 burner, 4m - Workpiece lead 25 mm²  ...

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48" (1219.2 mm) Pan mouth diameter: 19" (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75" (1917.2 mm) Floor space: 61" x 50" (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible a ...

4 chain pulleys make YALE type VSMB 5Year of construction 1998Capacity: 5 tLifting height: 3 mLoad chain size: 30 x 10 mmNumber of chain strands: 2With- Trolley 5 t, flange width 98-180 / 180-300 mmxa0xa0 with manual feed chainvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The CEA ATM 18/18 was conceived to be introduced in the modern Pharmaceutical production line. It is placed after the filling and sterilization line, before the labeling and packaging line. The ampoules and/or vials are loaded manually on the loading plane of the ATM machine 18/18 by trays. The output of the rejected and approved ampoules and/or vials are respectively collected in separate trays. Formats: 1-2-5 ml Technical characteristics: • Dimension ampoules and bottles: Diameter Ø from 9 to 18 mm total height up to 100 mm • Mechanical speed: 18,000 vials/hour max. for 1 – 2 ml ampoule • Rotation speed: continuously adjustable from 500 to 3000 rpm • Power supply: 230V ± 10% 50/60 Hz 1Ph • The Client must guarantee a voltage fluctuation of no more than 10% • Absorbed power: 5 Kw • Loading/unloading plane height: 900 mm (adjustable ± 25 mm) • Dimens ...

The RFC-8 is a high-speed automatic filling and closing machine designed to perform in-line dosing, filling and capping operations of round plastic bottles and vials. Technical data: Weight Kg 800 Dosage max. ml 25 Power kW 12 Frequency Hz 50 Voltage Volt 380 Air pressure bar 6 Production max. pieces/hour 18000 Monobloc machine with continuous movement built in AISI 304 stainless steel for filling and closing bottles complete with cap elevator and circular cap vibrator. The machine fills with 12 syringes made in stainless steel and teflon and with a capacity of 25 ml each. The syringes are fully adjustable in dosage and are connected to needles by means of special tubes to supply the dosed product. The capping group is made up of 8 roller-beading closing heads. All the most important operational functions are continuously monitored through a series of sensors. T ...

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5697825Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The ML 652 is a machine with versatile modular construction for liquid filling. The unit is suitable for the treatment of various kinds of products and is designed to handle a wide range of containers and closures. The technological solutions, the quality of materials and ease of use are the elements that ensure the operational reliability. The monoblock ML 652 is an automatic machine capable of performing three operations simultaneously: a volumetric filling with syringes and two capping stations. The second capping station applies the dosing cap or aluminium cap depending on the setup. Dimensions mm: 3240 x 1750 x 1920 Weight kg: 1500 Frequency Hz: 50 Voltage Volt: 380 Power absorption kw: 6 The unit is equipped with 3 vibrating feeders for the screw caps, dosing caps and aluminium caps. Two series of syringes are supplied with the machine: one already installed with prod ...

Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5546885Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

This unit is a filling and closing machine for metallic, aluminium tubes. The construction principles, materials used and innovative concepts guarantee maximum productivity, user friendliness and quality, making this machine an ideal solution for the pharmaceutical and the cosmetic market. Special consideration was given to a rapid change over to different tube sizes and consistency of filling product. The in-built flexibility makes it the ideal machine for use in research and development. Easy to use machine with excellent access for cleaning and maintenance. Technical data: Length mm 1825 Width mm 1115 Height mm 2150 Net weight Kg 2200 Production characteristics: Tube diam. min-max 10-52 mm Tube length min-max 52-250 mm Dosage min-max 2,5-500 ml Production capacity 40-120 tubes/min Automatic tube filling machine equipped with heated funnel, agitated hopper and 14 ...

Electric chain hoist make DEMAG type PK 1 NFFabr. -No: 1471196 built in 1970Capacity: 250 kgLifting height: 3.0 mLifting speed: 8.0 / 4.0 m / min.Fine lifting speed: 2.0 / 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-strandedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine with painted aluminum structure, equipped with Lexan protections complete with micro safety. Easy to clean and accessible. Technical data: Length mm 3750 Width mm 2700 Height mm 2080 Sliding surface height mm 700 – 1000 Weight Kg 1600 Voltage Volt 400 Frequency Hz 50 / 60 Current A 11 Mechanical speed carton / min 200 Production characteristics: Case length mm 75 – 350 Case width mm 140 – 450 Case height mm 120 – 350 Equipped with: one input product feeding belt; pneumatic product elevation group; stainless steel AISI 304S stacked product collection hopper with independent motorization; product introduction group with own motorization complete with encoder. The machine is also equipped with inclined carton magazine with a capacity of about 50 cartons; carton picking unit, with suction cup arm with independent motor complete with encoder; carton tr ...

Continuous capping machine equipped with one turret and 9 closing heads, suitable for capping plastic and glass bottles, with small footprint and high flexibility. Machine main characteristics are great flexibility, dosing accuracy, compact layout and high performances. This series is designed for the pharmaceutical sector and complies with strict GMP rules. This unit works with sterilised bottles. The bottle is conveyed inside the capping machine by the infeed belt. The carousel conveys the bottle under the capping head where it receives a cap from a mechanical vibrator and capping is carried out through a pressure system. After capping the bottle is stored in a collection box. The machine frame encloses the transmission gears, it is made of stainless steel and it is completely separated from the working area. The through tabletop conveyor, for the bottle inlet and outlet, is made ...

Electric cable factory TPS type SH 512/525Fabr. -No: 9913456 Year 1999Load capacity: 250 kgLifting height: 10 mLifting speed: 5.0 m / min.Rope diameter: 3.0 mmPower: 530 WPower connection: 220 V / 50 HzWith- Trolley Yale for double T-barsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The machine for closing bottles in modified atmosphere and under vacuum has been designed and built according to the most modern and advanced technologies. All the solutions adopted are the result of research and design aimed at the construction of safe, reliable machines capable of guaranteeing high quality and production standards. The machine was built with high quality components to ensure low maintenance and a long operating life. The pipes, fittings, valves, materials, installed instrumentation comply with the F.D.A. All the machine parts, the smooth surfaces, the rounded corners have been specially designed for facilitate cleaning and sanitization. Length mm 4550 Width mm 2310 Net weight Kg 5000 Frequency Hz 50 Voltage Volt 380 Production 9000 Bottles / h (100 ml) Size Used bottles 50 / 100 ml Material bottles used: glass Steam consumption 300 Kg / hour Water  ...

The automatic Blistering machine Partena CAM mod. M90 is a machine specially designed to face the problems of packaging of pharmaceutical products such as: vials, bottles, phialoids, capsules and tablets. The machine is pneumatically operated, the working cycle is obtained by the following workstations: preheating station, forming station, product loading plan, cutting station, covering station. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. The Blistering machine is equipped with a stainless steel elevator mainly used for elevating and loading products onto the receiving tray. The products are collected from the tray elevated, pre-sorted and fed to the top towards further feeding unit until they reach their des ...

Helical flanged train Fabr. CLOUD TYPE TRALIFTFabr. -No: 107681 Year 1995Load capacity: 1.0 tChain length: 23 mLifting height: 22 mused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The unit is suitable to pack blisters in PVC + Aluminum, Aluminum + Aluminum, Polypropylene, PET and PVC, Aclar, COC. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very easy to clean. This machine is equipped with various safety devices to protect the operator. Product parameters can be recalled from a PC, for a quick and easy format change. Reel unwinder driven by a Brushless motor, with automatic machine stop at reel end. Film splicing table equipped with integrated cutter, and automatic vacuum. Forming station entirely managed by Brushless motors. Self-aligning pre-heating plates, independently motorized. Film positioning driven by Brushless motor. Automatic Pitch adjustment directly from the display. Loader trolley MS170 with a maximum load of 300 kg. Dedicated product feeder and relevant enclosure easily remov ...