mixing used for sale

Complete Haarup 1150 concrete mixing plant from 1999. The plant has recently been dismantled and are ready to ship. The plant comes with skip hoist, Haarup Mixodatamat 3000 and instruction books. Amexpo Consult Merkurvej 31, 9370 Hals-Denmark. +45 29251017.

Condition: used,Other: Overall width: 1,950 mmTotal depth: 1050 mmTotal height: 1,400 mmHot mixer: approx. 10 litres - 5.5 kWCalter mixer: approx. 25 litres - 2.2 kWFflange closure of the hot mixer may be missing and would have to be replaced on site,Manufacturer: DIOSNA Dierks & Söhne

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Concrete filling station consisting of: - 4 hoppers with a total capacity of 14 m³ - incl. water dosing - incl. mixing area, disc mixer 0.5 m³, 5 mixing arms and 1 scraper, capacity 750 l, vibrates through mixing cycle, with electr. Emptying - incl. compressed air system - incl. cement silo 27.2 m³ 35 t - Incl. concrete conveyor belt - incl. control

Inv. Num. : 9266 Type: DUAL BATCH 40 Producer: Ecoenerg Created: 2022 Parameters: Weight of one batch: 2 x 50 kg One cycle: 4-6 min

Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system., Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce, Volume: 33000 l per tank, Max. pressure: 2 bar, Pump capacity: 28 m³/h, Operating temperature: 40 °C, Length: 2600 mm, Width: 2600 mm, Height: 8500 mm, Weight: 3900 kg, Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool, Material: stainless steel 1.4301, Position: free standing, Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps, Features: 2 zone frame cooling, ...

Mobile Mixing Plant, Fabr. IMER 1. Mixer: 1,200 litre capacity, 800 L net output for compacted concrete 2. Control: Original IMER control type HPS 2100-P 3. Year of manufacture 2021 - In-line feeder 4. Cement silos: 3 pieces each 60 tons or 42.9 m³ capacity 5. Cement augers: 3 pcs, with lengths of 6.0 m & 6.8 m 6. Aggregate bunker: 3 chambers with a total volume of 65 m³ 7. Kübelwagen: with a 1,000 litre bucket

Mixing tanks Manufacturer: Becomix Type M 15 Technical specifications Mixing tank, very good mint condition (was only used for the test run) Total boiler capacity 26 l Net capacity 15 l Mobile table version Product Area Material 1.4404 Boiler room material 1.4541 Usable space: Operating temperature 99 °C Boiler room: Operating temperature 144 °C Pressure 4 bar Can be heated with steam or water Coolable with water Turbo dissolver agitator power 0.75 kW, nominal speed 1,390 rpm, mechanical seal Operating manual available

Kieselgur mixing station comprising two vertical stainless steel mixing tanks, each fitted with a top-entry agitator and a central outlet., Additional title: Kieselgur mixing station comprising two vertical stainless steel mixing tanks, Capacity: 1300 l/vessel, Features: 2 stainles steel vessels with agitator, and podest, incl. fittings

Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve, Additional title: Insulated stainless steel pressure tank for outdoor installation with a cooling , Capacity: 43100 l, Operating pressure: 4 bar, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Additional title: with carbonization, Vessel volume: 500 l, Vessel operating pressure: 1 to -0,15 bar, Vessel operating temperature: 130 °C, Features: flow meter (E+H), blending vessel with stirring unit (5 hl), control panel with push-buttons, carbonization with subsequent calming section, no pressure tanks, no panel

There are 3 attachment mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 2. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 3. Manufacturer: Eirich Year of Make: 1984 Volume: 500l 3 first layer mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of production: 1974 Volume: 500l 2. Manufacturer: Eirich Year of production: 1974 Volume: 500l 3. Manufacturer: Eirich Year of production: 1984 Volume: 500l

Mobile Mixing Plant, Fabr. Blend E 050, with continuous mixer = for concrete with the option of producing cold asphalt = Scope of delivery consisting of: Blender - horizontal mixer 2100 mm length - Telescopic conveyor belt - Bitumen emulsion kit - Separate aggregate container with double belt - Continuous weighing system for 2 aggregates - Quick couplings for hydr. Attachments - Microfiber dosing system - Radio remote control Horizontal silo = - Length: 9,000 mm for loose cement, transportable on a truck or in a container

- Type: D3500 - Year of construction: 2007 - Dosing range: 0.1 – 999.9 litres - Mixing temperature range: +1°C – +80 °C - Inlet temperature maximum +80 °C - Dosing accuracy from 5 litres +/- 1% - Temperature accuracy from 5 liters +/- 1 °C - Water connection 3/4" male thread - Pipe supply lines at least 15 mm Ø - Power connection 230 V, 50/60 Hz., 40 VA - Weight with accessories 17 kg net

Mixers, make Haarup, planetary mixers = - Make Haarup, type 2250/1500 (2,250 l mixer) - 75 kW, dead weight 6,600 kg - Condition very well maintained and maintained - Available from the end of August 2026

Manufacturer: Normet Model: Norrunner Type of machine: Concrete spraying machine Year of manufacture: 2017 Power: 425 kW Total weight: 31720 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tourell Gardner 1500L mixing vessel Stainless, 1500L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, bottom discharge with SPX discharge valve, 3Ph

Tourell Gardner 1500L mixing vessel Stainless, 1500L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge into a Waukesha lobe pump 4.0Kw, 3Ph

Tourell Gardner 700L mixing vessel Stainless, 700L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge, 3Ph

Tourell Gardner 700L mixing vessel Stainless, 700L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge, 3Ph

CMF 700L mixing vessel 2017, Stainless, 700L capacity, top mounted motor with agitator, 3.0Kw motor, side bottom discharge, with timer, on mobile frame, 3Ph

Stainless steel mixing tank for dressings and sauces, This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors., Agitator speed is set steplessly with the dial on the control cabinet, which houses a frequency inverter., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/parema-mixing-tank-with-agitator/, Type: Mixing tank with agitator, Speed: Stepless (frequency inverter), Tank: Hinged lid, conical bottom with outlet, Construction: Stainless steel, on legs with castors

Mixing kettle that tilts for emptying, This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor., It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/tilting-mixing-kettle/, Type: Tilting mixing kettle, Lid: Pneumatically locked, Discharge: By tilting the kettle, Controls: Separate control cabinet with push buttons and emergency stop, Construction: Stainless steel

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50796-140

With mixer / agitator, Content: 200 litres, Heating: steam, 111 kg/h, Mixing: 10 - 60 RPM, Power: 3 x 400V, 50Hz, 2.2kW, Dimensions: 1550 x 1250 x 1700 mm, Weight: 440 kg

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min automatic material discharge, never used Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50798-248

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50799-140

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50801-28

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50798-6

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-51178-31

Batch of ceramic and stainless steel mixing pots Auction-ID: A1-50936-126

Stainless steel 316 Forklift available for loading Auction-ID: A3-46142-13412

Grinds 700gr to 30-300mesh at 36000rpm; 2500 Watt Auction-ID: A1-50864-146

Grinds 150gr to 70-300mesh at 28000rpm; 850 Watt Auction-ID: A1-50864-147

For eg. dry mortar or plaster. Mounted in stackable yoke, equipped with hopper bag. As well as the MAI 2 Pump Taurus, mobile mix/pump installation. Complete with remote control and user manual, as well as some loose parts. According to the statement, it was purchased on a trial basis and rarely used. The contents of the big bag are included. This is an unknown amount of mortar. Auction-ID: A1-50663-1561

Hook mobile mixing plant with Teka high-performance compulsory mixer (THZ) Ring disc mixer R 75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Teka, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 25 – 30 kW (380V/63A) Operation is via radio one-handed transmitter. Demonstration possible on request.

Stainless steel stirred tank PIERRE Guérin 230L n° P9100370-2. Pressure vessel: Permissible Pmax: 1.5 bar; Proof: 2.25 bar. Agitation by explosion-proof Leroy-Somer 0.75KW geared motor, and explosion-proof LEGRAND ATX control box. Dial thermometer 0 to 120 °C. Useful bowl dimensions: height 75 cm, diameter 65 cm. Auction-ID: A1-51318-3

Industrial mixing machine with bowl capacity 50 liters Auction-ID: A1-50663-1627

Includes: 1x Rako galvanized elevator, type: EV 100A, motor power: 2.5 KW, height approximately: 5500mm x W500 x D1000mm (2016), 1x screw clamp conveyor up to the scissor plough, dimensions: L 4300 x W200 mm, motor power: 2.2 KW. This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-10

Mixing and dosing machine THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-224

2 Hammer mills for grinding grains, maize, animal feed, minerals,... Application: machine that shreds materials by smashing them with rapidly rotating hammers in a grinding chamber. The 2 machines work with a rotor and a sieve, where the sieve perforation determines the final particle size. 1st hammer mill = SEKO 200/S 2nd hammer mill = SEKO 245/S Auction-ID: A3-46114-12605