mixing pump used for sale

Inv. Num. : 9266 Type: DUAL BATCH 40 Producer: Ecoenerg Created: 2022 Parameters: Weight of one batch: 2 x 50 kg One cycle: 4-6 min

Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system., Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce, Volume: 33000 l per tank, Max. pressure: 2 bar, Pump capacity: 28 m³/h, Operating temperature: 40 °C, Length: 2600 mm, Width: 2600 mm, Height: 8500 mm, Weight: 3900 kg, Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool, Material: stainless steel 1.4301, Position: free standing, Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps, Features: 2 zone frame cooling, ...

Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve, Additional title: Insulated stainless steel pressure tank for outdoor installation with a cooling , Capacity: 43100 l, Operating pressure: 4 bar, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Mobile Mixing Plant, Fabr. IMER 1. Mixer: 1,200 litre capacity, 800 L net output for compacted concrete 2. Control: Original IMER control type HPS 2100-P 3. Year of manufacture 2021 - In-line feeder 4. Cement silos: 3 pieces each 60 tons or 42.9 m³ capacity 5. Cement augers: 3 pcs, with lengths of 6.0 m & 6.8 m 6. Aggregate bunker: 3 chambers with a total volume of 65 m³ 7. Kübelwagen: with a 1,000 litre bucket

Mixing tanks Manufacturer: Becomix Type M 15 Technical specifications Mixing tank, very good mint condition (was only used for the test run) Total boiler capacity 26 l Net capacity 15 l Mobile table version Product Area Material 1.4404 Boiler room material 1.4541 Usable space: Operating temperature 99 °C Boiler room: Operating temperature 144 °C Pressure 4 bar Can be heated with steam or water Coolable with water Turbo dissolver agitator power 0.75 kW, nominal speed 1,390 rpm, mechanical seal Operating manual available

Kieselgur mixing station comprising two vertical stainless steel mixing tanks, each fitted with a top-entry agitator and a central outlet., Additional title: Kieselgur mixing station comprising two vertical stainless steel mixing tanks, Capacity: 1300 l/vessel, Features: 2 stainles steel vessels with agitator, and podest, incl. fittings

Additional title: with carbonization, Vessel volume: 500 l, Vessel operating pressure: 1 to -0,15 bar, Vessel operating temperature: 130 °C, Features: flow meter (E+H), blending vessel with stirring unit (5 hl), control panel with push-buttons, carbonization with subsequent calming section, no pressure tanks, no panel

There are 3 attachment mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 2. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 3. Manufacturer: Eirich Year of Make: 1984 Volume: 500l 3 first layer mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of production: 1974 Volume: 500l 2. Manufacturer: Eirich Year of production: 1974 Volume: 500l 3. Manufacturer: Eirich Year of production: 1984 Volume: 500l

Mobile Mixing Plant, Fabr. Blend E 050, with continuous mixer = for concrete with the option of producing cold asphalt = Scope of delivery consisting of: Blender - horizontal mixer 2100 mm length - Telescopic conveyor belt - Bitumen emulsion kit - Separate aggregate container with double belt - Continuous weighing system for 2 aggregates - Quick couplings for hydr. Attachments - Microfiber dosing system - Radio remote control Horizontal silo = - Length: 9,000 mm for loose cement, transportable on a truck or in a container

- Type: D3500 - Year of construction: 2007 - Dosing range: 0.1 – 999.9 litres - Mixing temperature range: +1°C – +80 °C - Inlet temperature maximum +80 °C - Dosing accuracy from 5 litres +/- 1% - Temperature accuracy from 5 liters +/- 1 °C - Water connection 3/4" male thread - Pipe supply lines at least 15 mm Ø - Power connection 230 V, 50/60 Hz., 40 VA - Weight with accessories 17 kg net

Mixers, make Haarup, planetary mixers = - Make Haarup, type 2250/1500 (2,250 l mixer) - 75 kW, dead weight 6,600 kg - Condition very well maintained and maintained - Available from the end of August 2026

Manufacturer: Normet Model: Norrunner Type of machine: Concrete spraying machine Year of manufacture: 2017 Power: 425 kW Total weight: 31720 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tourell Gardner 1500L mixing vessel Stainless, 1500L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, bottom discharge with SPX discharge valve, 3Ph

Tourell Gardner 1500L mixing vessel Stainless, 1500L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge into a Waukesha lobe pump 4.0Kw, 3Ph

Tourell Gardner 700L mixing vessel Stainless, 700L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge, 3Ph

Tourell Gardner 700L mixing vessel Stainless, 700L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge, 3Ph

CMF 700L mixing vessel 2017, Stainless, 700L capacity, top mounted motor with agitator, 3.0Kw motor, side bottom discharge, with timer, on mobile frame, 3Ph

Stainless steel mixing tank for dressings and sauces, This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors., Agitator speed is set steplessly with the dial on the control cabinet, which houses a frequency inverter., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/parema-mixing-tank-with-agitator/, Type: Mixing tank with agitator, Speed: Stepless (frequency inverter), Tank: Hinged lid, conical bottom with outlet, Construction: Stainless steel, on legs with castors

Mixing kettle that tilts for emptying, This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor., It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/tilting-mixing-kettle/, Type: Tilting mixing kettle, Lid: Pneumatically locked, Discharge: By tilting the kettle, Controls: Separate control cabinet with push buttons and emergency stop, Construction: Stainless steel

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50796-140

With mixer / agitator, Content: 200 litres, Heating: steam, 111 kg/h, Mixing: 10 - 60 RPM, Power: 3 x 400V, 50Hz, 2.2kW, Dimensions: 1550 x 1250 x 1700 mm, Weight: 440 kg

Hook mobile mixing plant with Teka high-performance compulsory mixer (THZ) Ring disc mixer R 75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Teka, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 25 – 30 kW (380V/63A) Operation is via radio one-handed transmitter. Demonstration possible on request.

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min automatic material discharge, never used Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50798-248

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50799-140

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50801-28

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50798-6

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-51178-31

Batch of ceramic and stainless steel mixing pots Auction-ID: A1-50936-126

Grinds 700gr to 30-300mesh at 36000rpm; 2500 Watt Auction-ID: A1-50864-146

Grinds 150gr to 70-300mesh at 28000rpm; 850 Watt Auction-ID: A1-50864-147

For eg. dry mortar or plaster. Mounted in stackable yoke, equipped with hopper bag. As well as the MAI 2 Pump Taurus, mobile mix/pump installation. Complete with remote control and user manual, as well as some loose parts. According to the statement, it was purchased on a trial basis and rarely used. The contents of the big bag are included. This is an unknown amount of mortar. Auction-ID: A1-50663-1561

Stainless steel stirred tank PIERRE Guérin 230L n° P9100370-2. Pressure vessel: Permissible Pmax: 1.5 bar; Proof: 2.25 bar. Agitation by explosion-proof Leroy-Somer 0.75KW geared motor, and explosion-proof LEGRAND ATX control box. Dial thermometer 0 to 120 °C. Useful bowl dimensions: height 75 cm, diameter 65 cm. Auction-ID: A1-51318-3

Industrial mixing machine with bowl capacity 50 liters Auction-ID: A1-50663-1627

Includes: 1x Rako galvanized elevator, type: EV 100A, motor power: 2.5 KW, height approximately: 5500mm x W500 x D1000mm (2016), 1x screw clamp conveyor up to the scissor plough, dimensions: L 4300 x W200 mm, motor power: 2.2 KW. This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-10

Mixing and dosing machine THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-224

2 Hammer mills for grinding grains, maize, animal feed, minerals,... Application: machine that shreds materials by smashing them with rapidly rotating hammers in a grinding chamber. The 2 machines work with a rotor and a sieve, where the sieve perforation determines the final particle size. 1st hammer mill = SEKO 200/S 2nd hammer mill = SEKO 245/S Auction-ID: A3-46114-12605

Drum pump, hygienic ExzenterschneckenpumpeVon of the company GrünpumpenTechnische DatenTyp ds.: LDS 80.1Ser. No.: 0259 Qm³ / h 2,40N1 / min: möglichVerpackung 6,75ZahlungsmodalitätenBarzahlung pick up and transfer in advance and shipping pick up, shipping via forwarding and abroad by prior arrangement all data were listed to the best of our knowledge and belief.Errors are reserved. This auction is aimed only at professionals, dealers, and other legal persons.

; ready for operation

Waelzpistongeblaese Manufacturer: Leybold Typ: RUVAC WAU 1001 Cat No.: 11741 Suction plugs: approx. 1000m3/h Status: Generalueberholt Gewagewgewgewgewgewgew: 12 months Delivery time: from stock; ready for use

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 1000 suction moulds: approx. 1000 m3/h Status: As new in original packaging Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list Further accessories by arrangement; ready for use

Waelzpistongeblaese Manufacturer: Leybold Type: RUVAC WSU 2001 Cat No.: 11741 Suction moulds: approx. 2000m3/h Status: Generalueberholt Gewastperformance: 12 months (similar); ready for use

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132Fabr. No. 173082 - 3101 Year of manufacture: approx. 1995Volume flow: approx. 50 m3/hNegative pressure: 0.5 mbar (indicated on the nameplate)Negative pressure: - 0.9 bar (determined during test run)Engine power: 3 kWMotor speed: 1420 rpm. Mains connection: 400 volts, 50 Hz- Oil-lubricated rotary vane pumpDimensions L x W x H: 700 x 420 x 310 mmWeight: 78 kgGood condition; used

Hilger & Kern P80 Pump Basic version P80 Barrel size 80l Gear ratio (drive) 56:1 Flow rate (with 20 double lifts) l/min 0.61 Material Viscosity (ball valve pump/scoop piston pump) 2.5 million Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum container height mm 750 Maximum container size 80 Maximum container Ø outside mm 440 A single pump is included Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

The Netzsch NL progressing cavity pump (also known as a mono or screw pump), engineered for the continuous and gentle transfer of challenging media. This pump operates on the well-proven progressing cavity principle, consisting of two primary components: a precision-machined helical rotor and a resilient elastomer stator. The rotor features a single-helix design with a large pitch, deep thread profile, and small core diameter. As the rotor rotates eccentrically within the stator, sealed cavities are formed that convey the product continuously and pulsation-free from inlet to outlet. This pump is previously used in a dairy factory. Motor: 1,1 kW - 220/240 - 380/415 V - 50 Hz - 1.410/1.700 rpm - 4,5/2,4 A. Connections on the inlet/outlet: DN 50. Estimated capacity (based on motor power, gear reduction unknown): +/- 1.000 ltr/h., Key Advantages:, - Valve-free design with stable, proportiona ...

- Manufacturer: Putzmeister - Machine Type: Rotor Concrete Pump - Presumed pump type: Putzmeister R 65 - Flow rate: up to approx. 40 m³/h - Max. delivery pressure: approx. 25 bar - Rotor delivery hose: approx. Ø 125 mm - Drive: electric - Motor power: approx. 45 kW - Voltage / frequency: 400 V / 50 Hz - Hydraulic tank: approx. 100 litres - During inspection, the hydraulic tank appeared to be about half full. - Before commissioning, a service including inspection or renewal of the hydraulic oil is recommended. - Operating hours: Approximately 750 operating hours are noted on a service/maintenance sticker from 2022. - The current operating hours are not known. Since 2022, further operating hours may have been added. - According to the seller, the machine was originally purchased for a project, but not used. - Accessories: The hoses recognizable in the pictures are part of  ...

Set of 3 Industrial Centrifugal Pump / Slurry Pump Assembly with Gearbox. One is fully refurbished and ready for use; the other two are used, but will be dismantled and loaded free of charge. Auction-ID: A1-51282-157

Kat-No 08-1514 in very good condition - checked! Pump diagnostics: Pressure test: 4 bar Suction capacity up to -1.5 bar: -0.5 Conveyor pressure: 3 bar Power: 23,500 liters/h Ampere min/max: 3.8 Other pump types or our complete range (tanks, pumps, filters, beverage technology) on request! For questions call 09353 909050 or 0171 651 8248 Fax: 09353 9090522 All prices are ex works, plus Vat Intermediate sale reserved. Freight cost share: by scope of delivery Sightseeing is also possible on weekends or evenings by appointment.

Kat-No 08-1632 in very good condition HxLxW: 56x78x30 cm For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 All prices are ex works plus law VAT Intermediate sale reserved Freight cost share: by scope of delivery Delivery time: immediately from stock Sightseeing is also possible in the evening or on weekends by appointment.