mixing pump used for sale

A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Concrete batching plant Turbine type: Sternanlage (Schrapper) Type: H2 Year of Make: 1993 Mixer: BHS Twin Shaft Compulsory Mixer LEKX2.0 Number of binder silos: 3 pcs. Silo capacity: 2 x 100 t (single chamber), 1 x 100 t (double chamber) Number of augers: 4 pcs. Schrapper Type: Stetter Schrapper SW CRS150 Scraper capacity: 150 cbm/h Cement scale: yes Additive scale: yes Number of admixture tanks: 2 pcs. Control: SIMATIC OP27 RC system: Klärfix SPECIFIC COMMENT - Incl. control and control cabinet - No heating system - Fully functional

Name: Mixing tank Manufacturer : Becomix Type: M 15 Technical specifications : Mixing tank, very good mint condition (was only used for the test run) Total boiler capacity 26 l Net capacity 15 l Mobile table version Product Area Material 1.4404 Boiler room material 1.4541 Usable space: Operating temperature 99 °C Boiler room: Operating temperature 144 °C Pressure 4 bar Can be heated with steam or water Coolable with water Turbo dissolver agitator power 0.75 kW, nominal speed 1,390 rpm, mechanical seal Operating manual available

A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible.

1,216 liter turbo stirrer for spray cream 2 pieces with mixing table Characteristics: Volume container 1 1216 liters Volume container 2 1216 liters material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2700 mm Width 2000 mm length 6000 mm Number of feet 4 Description MJ UNI-HIGH Consists of 3 parts with pedestal Part 1/3 Mixing table Dimension: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/3, 3/3 per container with a capacity of 1,216 liters Dimension: Total height: 2,700 mm Cylinder height: 1,250 mm Inner diameter: 1,150 mm Container description: Topsoil: Lid with 1/3 flap at the front and back with grid Propeller agitator Underbody: Residual drain pipe connected to line 4 fixed feet on each frame

PLC CONTROLLED MIXING, BAG FILLING AND WEIGHING SYSTEM, for plastic granule, customized to the project, including [vertical mixers](.germanplast.eu/it/annunci/4309783-vertical-mixers-from-5-to-3 0-m3), buffers,, pneumatic system with deviators, cyclones, .., with and without loading screws, loading cells, digital display, visual and sound alarms, all managed by a PLC

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

Used mixing plant with 2 mixers consisting of: - Kniele concrete mixer KKM 1500/1000, built in 2004, with elevator - Teka compulsory mixer, year unknown, with elevator - 15 day silos with rotary loading conveyor from above - Control modernization by Sauter Used mixing plant with 2 mixers consisting of: - Kniele concrete mixer KKM 1500/1000, year of construction 2004, with skip - Teka compulsory mixer, year of construction unknown, with skip - 15 daily silos with rotary loading conveyor from above - Control modernisation by Sauter company

Mobile concrete batching plant SUMAB 500: - The basic module is equipped with 2-4 hoppers. - Completely pre-assembled at the factory, which reduces assembly time. - Does not require a special foundation for installing the main unit of the installation (only a solid concrete slab). - Equipped with a sealed cabinet located on the structure and a computer control system. - Includes high-end installation features in a compact size. - The entire assembly (except silos) is transported in one 40-foot container. Basic indicators: - Dosing cycles 0.5 m3. - Turbo concrete mixer FTR 750/500. Equipped with a weighing system for aggregate and concrete. - Equipped with 1-2 units of 2 bunkers with a capacity of 7 m3 each. - Aggregates are dosed using B400 extraction conveyors. - Water dosing device with counter. - Water installation equipped with a 1.1 kW feed pum ...

Mixing tank type D 63 F Properties: Total height 1020 mm Width 400 mm Overall length 620 mm Installed motor power 0.18 kW from Mischtechnik GmbH, Ottobrunn Type V 1

Hook mobile mixing plant with Liebherr ring plate mixer R 0.75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Liebherr, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 45 – 50 kW Operation is via wireless handheld transmitter (1st mixer: on/off; 2. Conveyor belt on/off and open/close mixer).

A&F Butter Carton Packer As spare part machine last years of use, Type; 720-2.25.W4 Item no. 930300A Built in 1994 with garage content behind the A&F machine

Ice water system Langheinz L 130 with ice bank: 30 kg Water connection: 1/2" Weight empty / operating approx.: 65kg / 160kg Energy consumption at 100 litres: 1.5 - 2.5 KWh Connection 220V Used device cleaned with warranty Option: Maintenance contract Delivery Instruction & Commissioning

TECHNICAL SPECIFICATIONS Manufacturer: MICROMIX Description: Concrete filling station Version: Semi-mobile Type: 500 Year of Make: 2017 Plate Mixer Batch: 0.5 cbm Hourly output: 15 cbm Drive power mixer: 15 kW Aggregate silos: 2 x 6 cbm Water storage tank: 120 l Binder silo: 27.5 cbm / 35 t cement Unloading conveyor (length/width): 10,000 mm / 800 mm Discharge height unloading conveyor: 4,000 mm Drive power unloading belt: 4 kW SPECIFIC COMMENT - Control module with magnetic stripe card - Automatic scale (calibratable) - Admixture dosing - Dust bag filter with electromagnetic vibrator and dust collection container - Height adjustment of the belt conveyor/unloading belt

A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Mixer Manufacturer: Haarup Type: HM300 The mixer was completely renovated, primed and painted in 2020. In addition, a new elevator with elevator bucket was installed in 2020. Blender Manufacturer: Haarup Type: HM300 The mixer was completely refurbished, primed, and painted in 2020. In addition, a new skip with elevator bucket was installed in 2020.

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

Mixing plant/fresh concrete, with PEMAT mixer, winterproof with heating Sauter/gas, capacity 45-50 m³/h - Binder: 2x60 t (30x30)t & complete silo technology & cement screws - Aggregates: Bucket elevator via revesier belt in chambers (chimneys new about 3 years ago) Boxes/volume = 5 chambers (40,40,30,70,30)t, incl.: moisture measurement, incl.: mixer feed = weighing container (3000 kg) to the inclined belt (cleats) in mixer - Additives: incl. storage/volume: Second-chamber scale 25/5 kg - incl. spirit level: container scale 300 kg - Mixer : PEMAT - Partial mixer 1.25 m³ with 2 mech. Whirling

Stock# U2473-1 Used system for inline mixing powder with liquid. System consist of: - conical stainless steel AISI 321 feeding hopper with total volume about 4000 l, and working volume about 3800 l. Tank has top side wall feeding inlet with dimensions L 700 mm x H 350 mm, equipped with stainless steel lid closed on clamps. Tank has on conical side wall mounted vibrating device. Includes working platform with stairs. - inline liquid-powder mixer. Powder inlet connection 3". Mixing chamber has internal diameter 180 mm. Rotor is driven directly by el. motor 6.8 kW, 1455 rpm, 400/690 V, 50 Hz, in Ex design (Ex-IIC Exe IIC T3G6). Mounted on mobile stainless steel frame. - Stainless steel bag type dust filter by WAM in Ex design - Connection stainless steel pipes and valves.

Equipment: Agitator,Condition: used,Volume: 43,000,Design: upright,Base: feet,Number of feet: 6,Diameter outside: 3,000,Cylindrical height: 6,000,Total height: 8,000,Manhole / dome: in cylinder,Nameplate: No,Equipment: crane eyelets,Outlet: available,Outlet : 65 / 80,last use: foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Power: 5,Speed: 36,Agitator: Inclined blade stirrer,Voltage: 400,Bottom bearing: Yes,Current interferer: No,Agitator arrangement: eccentric in the topsoil,agitator arrangement: on the side of the cylinder,speed: 18,bottom bearing: no,power:

Equipment: heatable/coolable, insulation, agitator,condition: used,volume: 16,000,design: upright,base shape: feet,number of feet: 4,heating/cooling (filter bar): available,temperature control cylinder: double jacket,temperature control underbody: double jacket,insulation: available,insulating jacket: hermetically welded,material insulating jacket: stainless steel,diameter inside: 2,400,cylindrical height: 3,550,total height: 6,000,manhole / dome: in the upper floor,nameplate: no,equipment: Venting, crane eyelets,Outlet: available,Outlet : 50,Remarks: Double jacket with trickle ring - only for non-pressurized

Equipment: Insulation, Agitator, Overpressure,Manufacturer: Bertsch,Condition: used,Volume: 118,000,Max. overpressure: 1.0,Max. permissible Operating temperature : 100,Design: upright,Stand shape: feet,Number of feet: 4,Insulation: available,Insulating sheath: riveted,Insulation thickness: 90,Diameter inside: 4,000,Cylindrical height: 8,400,Total height: 13,100,Wall thickness underbody: 12,Wall thickness cylinder: 5,Wall thickness upper floor: 6,Technical documents: Drawing, acceptance certificate,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet : 100,Note: light

Mixing troughs plastic white 3 pcs. plastic shelf approx. 80x160 cm, turquoise, small parts lying in this room

A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.

Mischturm, Fabr. Liebherr, type Betomat 235 Aggregate silo size 290 m³ / chambers Cement silo: 3 silos (2x60 to + 1 divided with 2 x 30 tons) Forced Action Mixer: BHS Twin Shaft Trough Mixer = Type: DKX 1,67 / refurbished - 1 x Control: BENNINGHOVEN (latest version) Year of construction 89', the system was completely overhauled 5 years ago with control electrical conveyor belt - 1 x Kroll oil heater for winter operation The price of 65,000 euros is intended as a basis for negotiation, as the customer needs the space.

Used Mobile Concrete Batching Plant / Concrete Filling Station Manufacturer: PROMEKON GmbH Model: QUASIMIX 1000S Availability: Immediately Location: Northern Germany Year of construction 2022 Previous production: ca. 400m3 Technical Specifications Aggregate Storage • 1 double hopper: 2 × 2.4 m³ • Incl. 2 separate dosing belts Mixer • Pan mixer: 1 m³ • Output: approx. 25 m³/h • Incl. automatic mixer scale (calibratable) Dosing System • Aggregates via dosing belts at the hopper • Cement dosing • Water dosing via water meter Cement Silo • 1 × 27.3 m³ Control System • Fully automatic process and system control • Designed for self-service operation Terms of Sale • Offer is net ex works • Subject to prior sale • Errors and/or misstatements excepted • Sold without warranty or guarantee • Condition: as seen, lying and/or ...

Stainless steel vacuum vessel with EKATO FLUID Mixer TYPE FGL-25D (mixer new 2005) vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Scraper plant Type: SW CRS 150 Year of Make: 1993 Theoretical flow rate: 150 cbm/h Current: 115 A Voltage: 220/380 V Cabin weight: 4,400 kg

TECHNICAL SPECIFICATIONS Manufacturer: ELBA Description: Radial Scraper Machine Type: Stationary Type: RSA 70D Year of Make: 1996 Boom length: 20 m Connected load: 65 kW Operating voltage 380V Weight: approx. 5,000 kg

A Bohle container mixer is available. Mixing load: 900kg, Container volume: approx. 800l, Usable filling degree: 85%, Mixer speed: 6rpm, Container diameter: 1100mm, Machine height: 2800mm. An on-site inspection is possible.

Equipment: heatable/coolable, insulation, agitator,Manufacturer: Mühlfellner Tankbau,Condition: used,Volume: 11,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Heating/cooling (filter bar): available,Temperature control cylinder: half pipe coil,Temperature control underbody: half pipe coil,Insulation: present,Insulating jacket: hermetically welded,Material insulation jacket: stainless steel,Diameter inside: 1,880,Cylindrical height: 4,600,Total height: 5,660,Manhole / dome: in cylinder,nameplate: yes,equipment: crane eyelets,outlet: available,outlet : 50,last purpose:

Equipment: Agitator,Condition: used,Volume: 30.000,Design: upright,Base: feet,Number of feet: 3,Diameter outside: 3.200,Cylindrical height: 4.100,Total height: 6.400,Manhole / dome: in the cylinder, in the topbody,Type plate: No,Equipment: crane eyelets,Outlet: available,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Power: 2.2 / 4.4,Speed: 15 / 31,Agitator: Inclined blade stirrer,Voltage: 400,Bottom bearing: Yes,Current interferer: No, Agitator arrangement: eccentric in the topsoil,Bottom bearing: No,Current interferer: No

Equipment: Agitator,Condition: used,Volume: 40,000,Design: horizontal,Base: feet,Number of feet: 6,Diameter outside: 3,000,Cylindrical length: 5700,Total height: 4,500,Total length: 6,300,Nameplate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Outlet: pipe end approx. 65mm,Last use: Foodstuffs,Surface outside: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Manufacturer agitator: Stelzer,Power: 1.1 / 4,Speed: 480 / 980,Agitator: Propeller,Voltage: 380,Bottom bearing: No,Current interferer: No,Agitator arrangement: on the container,Manufacturer agitator:

Equipment: Insulation, Agitator,Manufacturer: Alfa Laval,Condition: used,Volume: 40,000,Design: upright,Standing form: Standing frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: Cork,Material insulating jacket: Stainless steel,Diameter outside: 3,050,Cylindrical height: 6,000,Total height: 8,300,Wall thickness underbody: 3,Wall thickness cylinder: 2.5,Wall thickness upper floor: 4.5,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets, Spout: available,Spout : 100,Remarks: Stand frame reinforced with concrete (see pictures),last use:

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The dynamic in-line flow mixer type RM offers performance, precision and hygiene for the food, chemical and plastics processing industries and for numerous other process mixing processes.The performance spectrum of the dynamic flow mixer RM includes stirring, mixing, gentle mixing and blending, reacting, diluting, coloring, homogenizing and much more. Drive with tubular housing and mixing shaft running therein. Welded mixing elements. Mechanical seal. Vertical design with foot flange. It is a dynamic flow mixer that is suitable for CIP (Cleaning in Place). Capacity: up to 4.000 ltr/h. Lenght of the rotor: 425 mm. Inside diameter of the house 130 mm. Connections in / out: DN65. Motor: ± 3 kW (not visible on nametag) - 400 V - 50 Hz., Type of Machine: Inline mixer, Capacity: up to 4.000 ltr/h, Length of rotor: 425 mm, Inside diameter of the house: 130 mm, Motor: ± 3 kW (not visible on na ...

SALES MANDATE Brunetti Professional Blender Food mixing equipment Professional kitchen use Robust construction Condition: unused Not tested gray Auction-ID: A7-44748-43

SALES MANDATE Brunetti Professional Blender Food mixing equipment Professional kitchen use Robust construction Condition: unused Not tested gray Auction-ID: A7-44748-42