mixing pump used for sale

Gardner Denver/Rietschle Claw vacuum pump VLR 500 with 9.0 KW AC-motor, 500 m3/h, final pressure: - 750 mbar, completely overhauled with all wearing parts, 1 year warranty

Rotary vane compressor manufacturer: Becker Type: VT4. 25 Voltage: 400V/50 Hz Warranty: 12 months Status: Rebuilt and new painted Pressure capacity: 25 m ³/h Discharge pressure: Max + 1 bar (rel) Accessories: owner's manual; ready for operation

Becker rotary vane vacuum pump VTLF 2.250/0-79 with 5.5 KW DS motor, 250 m3/h, final pressure: - 800 mbar, completely overhauled with all wearing parts, 1 year warranty

Drehschiebervakuumpumpe-dry running Manufacturer: Becker Type: KVT 3.140 Engine: 400V/50 Hz Suction capacity: 140 m ³/h Discharge pressure: 100mbar (ABS) corresponds to 90% vacuum Status: Rebuilt Accessories: vacuum filter installed; Operating instructions Further details or technical assistance like via request; ready for operation

Oerlikon/Leybold roots vacuum pump WA/WAU 501 with 2.2 KW AC-motor, 500 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

Oerlikon/Leybold roots vacuum pump WAU 1001 complete with 4.0 KW AC-motor, 1000 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty

Rotary vane vacuum pump 2 Stage State: Absolutely new indoors and outdoors, General ueberholt and repainted Performance: 12 months Manufacturer: Pfeiffer Type: DUO 120 engine: 400V DS equipment: mineraloel Inclusive: user manual oel mist separator optional delivery time: on request photo is available at night.

Rotary vane vacuum pump 2 Stufig state indoor and outdoor absolute condition, Rebuilt and repainted Warranty: 12 months Manufacturer: Pfeiffer Type: DUO 120 Motor: 400V DS resources: petroleum Includes: User manual oil mist eliminator optional Delivery time: on request photo is adjusted retrospectively.; ready for operation

Was installed in a Husky injection moulding machine

Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use

Rotary vane vacuum pump Status: Generalueberholt; As capacity: 12 months Yield time: from stock Manufacturer: Busch Type: R5 RA 255D Engine: 400V Equipment: Mineraloile Nominal suction digesters: 250m3/h Final pressure: 0.5 mbar (abs.) Zubehoer: User Manual; Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you.

Was installed in a Husky injection moulding machine

No.: 469543 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Comm.: 63006828 Y.O.m.: 2012 Capacity: 8m3/h at 372 rpm 1.2m3/h at 63 rpm LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Bosch stainless steel dosing pumps, 12 mm (21 pcs. available)

Lowara pump FHS 100-200/300 ELP 120-310m ³/h 47m - 22, 6m, P2 30KW, incl. non-return valve and line reducing valve

Type: 2NL20A Year: 1979 Capacity: 205 l /min Motor: 0,75 kW Working pressure: 19 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1530 mm Width: 420 mm Height: 1050 mm

Vacuum pump Manufacturer: Pfeiffer Type: DUO 2.5 (PK D41 602A) Built: 2003 Pw: 0.13 kW For further data see also type plate photo All information without guarantee

Capacity: 56 l/min Motor: 1,5 kW Working pressure: 6 bar - Input with threaded supports DN 40, DN 50 - Output with threaded supports DN 50 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1700 mm Width: 550 mm Height: 1030 mm Weight: kg

Year: 1979 Capacity: 25 l /min Motor: 0,75 kW Working pressure: 13 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1400 mm Width: 410 mm Height: 1020 mm Weight: kg

Year: 1979 Capacity: 20 l /min Motor: 0,75 kW Working pressure: 19 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1400 mm Width: 410 mm Height: 1020 mm Weight: kg

Capacity: 150 l/min Motor: 1,5 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg

Capacity: Motor: 1,6 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg

new Aerzen vacuum pump GM 2000 CM - Y 11 KW for frequency inverter operation Built in 2010 New, original packed 2800 m3 / h Price is unit price net, plus 19% VAT 6 pieces available

Connection: 1 x DN 25, DN 40 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 1,5 kW Capacity: 150 l/min. Pressure: 2 bar Measurements and Weight: Length: 1330 mm Width: 520 mm Height: 860 mm

various dosing pumps new & used

Rexroth double pump for Battenfeld injection moulding machine R900737658 SYDFE1-20/100R R900737659 SYDFE1-20/071R

Connection: 1 x DN 25, DN 50 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 11 kW Capacity: 20m3/h Pressure: 8 bar Measurements and Weight: Length: 930 mm Width: 580 mm Height: 1030 mm

overhauled Rexroth double pump for Krauss Maffei SGM machines

Connection: 1 x DN 40 , DN 40 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 3,0 kW Capacity: 170l/min Pressure: 2 bar Measurements and Weight: Length: 1000 mm Width: 370 mm Height: 700 mm

Rexroth double pump for Battenfeld injection moulding machine SY2DFE1-2X/100-100 MNR: R901016480

For transfer of liquids, must, de-stalked grapes, yeast Technical data: Thread connection 2 x DN 65 Type: AM 112 NZ4/2 3 ~ Mo. No. 43604117 ?/ YY 380V 7,8/8,8 A 3,2/ 4,0 kW 1430/ 2870 1/ min 50 Hz VDE 0530/72 B/IP 44 Measurements and Weight: Total Height: 1000 mm Width: 700 mm Length: 1018 mm Weight approx. kg

For transfer of liquids, must, de-stalked grapes, yeast Technical data: Connections: 2 x DN 50 1 x DN 65 Type: AM 132 SU 4/2 ?/ YY 380 V 11/13,5 A 5,2/6,5 kW Cos 0,82 / 0,88 / 1450/2910 U/min 50 Hz Measurements and Weight: Total Height: 1100 mm Width: 780 mm Length: 1200 mm Weight approx. kg

Vacuum pump Rietschle CLFE 61V (02) Suction capacity 60 m3 / h Final pressure 10 bar Motor 2,2 kW Year of construction 1989 L x W x H: 80 x 50 x 40 cm Weight approx. 50 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Leybold E250 locking valve vacuum pump is after the general overhaul: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Leybold E250 Rotary Piston Pump pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

The Trivac D65B rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold Trivac D65B Rotary Vane Pump wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Our Ruvac RA7001 roller piston vacuum pump is after the general overhaul: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold RUVAC RA7001 Roots-blower pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Our Sogevac SV300 rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Our Leybold Sogevac SV300 Rotary Vane Pump wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

our Ruvac WAU1001 roots vacuum pump is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty After refurbishing, our LEYBOLD RUVAC WAU1001 roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

Eccentric spiral pump NETZSCH NE80A 15-20 to/h used - in very good condition! UNI-ALTD Capacity: approx. 15-20 t/h Year: 1984 Type: NE80A Flange: 1 x DN 120 1 x DN 150 Comment: the pump is tested, 100% functions guarantee! Measurements: Length: 2030 mm Width: 600 mm Height: 1300 mm

Rotary vane pressure/vacuum pump from Gardner Denver/Rietschle KTA 80/5 complete with 4.0 KW AC-motor, 50 m3/h, + 1.0 bar pressure, - 0.6 bar vacuum, Heidelberg version with Heidelberg plug, completely overhauled with all wearing parts, 1 year warranty

food piston pump, Ex version: Costruzione Macchine Enologiche model: 1760 GL year: 1997 9 kW Ex

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 1 Model: NB 100-200/181 A-F-A-GQQE Built: 2008 Rated flow current: 284.3 m3/h Nominal head: 33.4 m Speed: 2950 rpm Pressure: 16 bar Temperature range: 0-90 °C Power: 37 kW The pumps never went into operation after installation and therefore virtually unused. Technical specifications and data sheets are available and will be sent on request.

Eccentric screw pump with funnel Power: approx. 15-20m3 per hour Infinitely adjustable with adjustable motor Dimensions and weight: Length: 3100 mm Width: 820 mm Height: 1300 mm Engine data s. Photos

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Available on stock immediately Available single and double versions in Recon and Used