mixing plant used for sale

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details.

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw  ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

General SKU214X079 MakeCollin LocationBarneveld TypeW110 AP x 350 Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variatorcheck 3-36 rpm With temperature controlcheck 20-270°C Electrical heatingcheck Information No.1130-25-08 Year of construction2008 With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm :Mixing millsIQAP TechnologiesPlastic machinery > Mixing millsBrand > IQAP Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU379X1448 LocationBarneveld MakeCollin TypeTischwalzwerk Main Features Size length210 mm Specified Features - Mixing mill Laboratory presscheck Motor4 kW 380 V Mixing mills MaterialStainless steel Information Mach.No.141 11 86 Year of construction1986 With switchcheck Floorspace1,13 x 0,45 m Total height0,60 m Weight150 kg Extra Specifications2 roller wals, roll dia. 100 mm, roll width 210 mm :Mixing millsCollinPlastic machinery > Mixing millsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: -- Machine ...

General SKU362X851 MakeCOLLIN Type3-Roller Calander: calander type 250 × 600 No.4490-07-06 Year of construction2006 Mounted on framecheck Main Features Motor46 KW Width600 mm Specified Features - Mixing mill MaterialHardened Tool Steel Mixing mills Roll width600 mm (nominal 500 mm) Roll diameter252 mm Rolls can be heated/cooledcheck (roller 2&3) 9 kW: 320 °C With variable speed drivecheck Roll speed± 8,6 rpm Rolls can be adjustedcheck 0—2 mm With hydraulic unitcheck With motorcheck MotorServo motor nominal power 1.4 kW (per roll drive): unwinder 0.24 kW: winder 0.24 kW: hydraulic pump 2.2 kW: oil cooler 0.25 kW: heating 9 kW per heated roller Information LocationBarneveld With switchcheck With switchgearcheck Floorspace3,12 x 1,8 m Total height3,16 m Weight3500 kg CEcheck Extra Specifications Application: finishing/planishing of foil materials up to 2 ...

General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder MaterialStainless steel 1.4000 (410S) Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zonescheck 3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hoppercheck Buss ELS 70 Feeding with metering screwcheck 63 rpm Information TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CMixing extrudersNew arrivalsBussExtruders > Mixing extrudersNew arrivalsBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

IBS G60 is a mobile gravimetric concrete mixing plant capable of producing not only cement mixtures, but also cold asphalt, recycled cold asphalt, soil stabilization mixtures and soil remediation mixtures. The machine is equipped with two separate aggregate hoppers (5 m³ each), a cement hopper (3 m³), and a water tank (1000 L). Additionally, it can be fitted with two tanks for different types of admixtures, as well as an optional emulsion tank. This makes the unit completely autonomous and enables concrete production directly on the construction site, providing significant economic advantages and ensuring high-quality concrete production. The machine is easy to operate and requires only one operator. Mix recipes are defined by entering the desired quantities of each component through the control panel. At the end of the production process, the machine prints a report containing the  ...

Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

660 x 2130 Bolling Dough Mixing Machine

NNP mixing vessel Stainless 500l mixing vessel, jacketed, top mounted motor with agitation and scrape surface, central bottom discharge, 3Ph

Kenplaat mixing tank Stainless 1500l mixing tank, top mounted motor, level detection, side bottom discharge

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Refer to code 1133 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with horizontal conveying screw to on ...

cantilevered mixer 120l when filled with water approx. 100l usable volume with control box with stud work with ball segment valve as outlet 0 operating hours at the end customer

General SKU360W979 LocationBarneveld MakeBüchi No.109900 Year of construction1990 Pressure Working pressure0.4 Bar Vacuum possiblecheck Main Features MaterialGlass Volume25 Ltr. Motor0.35 KW Specified Features - Stirring vessel MaterialBorosilicate Glass 3.3 Closed stirring vesselcheck Capacity25 l Vessel sizesø 300 x 400 mm Dished bottomcheck Outletcheck Max. temperature-50°C/+200°C With propellor stirrercheck Motor0,35 kW (220/380 V 1390 rpm, (Ex)) Speed mixing shaft550 rpm Information Mounted on legscheck wheels With switchcheck Floorspace0,60 x 0,60 m Total height2,0 m Weight120 kg ATEX compatiblecheck Extra Specifications-1bar + 0.4 Bar Double segment stirrer Stirring vesselsBüchiStirring vessels > Stirring vesselsBrand > Büchi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for s ...

General SKU328W698 LocationBarneveld MakeLoedige TypeMGT-250 Mach.No.16.141 Main Features MaterialStainless steel Volume250 Ltr. Motor22 KW Specified Features - Universal mixer Universal mixercheck Capacity250 l., (210 l.) Vessel sizes⌀ 785 x 500 mm With covercheck Inlet785 mm Pneumatic operated outletcheck Outlet⌀ 200 mm With motor22 kW, 400 V, 1460 rpm, (Ex) Rotor speed30-300 rpm With lump breakercheck With motor4.7 kW, 400 V, 1450 rpm Rotor speed1450 rpm MaterialStainless steel 1.4404 (316L) Information Year of construction2008 CEcheck Floorspace2,50x1,30 m Total height2,36 m Weight1900 kg ATEX compatiblecheck Extra Specificationscheck Suitable for mixing under Nitrogen. Mixing granulator for pharmaceutical products, cosmetics and food. GMP-compliant design. Modular WIP system for the machine and all additional components. : Universal mixersLoed ...

General SKUCX001 LocationBarneveld MakeTartler TypeNodupur VSAR A/B Vakuum No.#2123 Year of construction2012 Pressure Working pressure0.05 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor7.5 KW Specified Features - Hot mixer Hot/Cold mixercheck Hot mixercheck Vessel sizes200 l & 100 l With jacketelectrical traced Max. temperature50°C With motorcheck With variable speed drivecheck MaterialStainless steel 1.4306 (304L) Information Mounted on framecheck Mounted on wheelscheck Total height1,8 m Weight2500 kg CEcheck With switchgearcheck Floorspace1,6 x 1,9 m Extra Specifications- Two component mixing and dosing systems consisting of:  :  : - 200 litre vessel (electrical traced) with stirrer  :  : - 100 litre vessel (electrical traced) with stirrer  :  : - Siemens SPS 7 control system  :  : - 2 lobbe pumps  :  : - static mixer  : : : ...

General SKU293X474 LocationBarneveld MakeATML LifeSciences TypeMM-JTBB360 No.MM-JTBB360-0001 Year of construction2013 Main Features MaterialStainless steel Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable Information Mounted on legscheck and wheels With switchgearcheck Weight250 kg CEcheck Floorspace1,50x1,0 m Total height1,36 m Extra SpecificationsWith disposable mix bags, volume 350 l.Stirring vesselsATMI LifeSciencesStirring vessels > Stirring vesselsBrand > ATMI LifeSciences What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

General SKU293X475 LocationBarneveld MakeATMI LifeSciences TypeMM-JTBB360 No.MM-JTBB360-0002 Year of construction2013 Main Features Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable Information With switchgearcheck Weight250 kg CEcheck Mounted on legscheck and wheels Extra SpecificationsWith disposable mix bags, volume 350 l.Stirring vesselsATMI LifeSciencesStirring vessels > Stirring vesselsBrand > ATMI LifeSciences What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

660 x 1500 Dough Mixing Machine Russian origin 110 kW motor Bearing-supported Flywheel gear system With brake Ready for operation / in working condition

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...

General SKU200W007 MakeWaterleau TypeDiam 1210mm-L=3600mm No.2.11.560 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Specified Features - Miscellaneous mixer MaterialStainless steel 1.4301 (304) Mixercheck Information Floor space5,65x2,65 mtr Total height2,20 m Weight6470 kg CEcheck Extra Specificationsdrum mixer with spraynozzles. -Drum diameter 1210mm. -Lenght 3600mm. - Input and output to belt conveyor. - Input 350x350 mm, output 600x400 mm - R77 Helical gearmotor, speed 1455/104 rpm, 5,5 kW  : Technical specs Extra informationagglomeratorMiscellaneous mixersWaterleauMiscellaneous > Miscellaneous mixersBrand > Waterleau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU309X465 MakeHaagen & Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) Information LocationBarneveld With switchgearcheck ( as is) Floorspace7x2,5 m Total height± 3.8m ...

General SKU279M288 MakeOostendorp apparatenbouw B.V. TypeMixing reactor of 800 liter No.6073 Year of construction2005 Mounted on legscheck Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume800 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactor(1x) Capacity800 Ltr. Vessel sizesdia. 900x1400mm Dished bottomcheck Dished top sidecheck Manhole/handgat dia. 150mm Top connections7x Outletdia. 50mm With jacketcheck Max. temperature150 Degr. C. With propellor stirrercheck Motor0,75 KW, 220/380 Volt (Ex) Information LocationBarneveld Floorspace1,2x1,2 M Total height3,3 M Weight1200 KgCatalysts & fillersSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid ...

General SKU051G200 MakeWerkhuizen Schepens N.V. Dendermonde TypeMixing drum No.70-776-397 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor11 KW Inlet diameter1200 mm Specified Features - Miscellaneous mixer Coating installationContinuous drum coater (1x) Pan diameter1200mm Cylindrical width6000mm, Adjustable inclination In-/OutletInlet 340x340mm, Outlet 400x600mm Motor11,0 KW, 380-415/660-720 Volt With spraying arm(nozzles are missing) Miscellaneous mixers MaterialStainless steel 1.4306 (304L) Information LocationBarneveld With switchgearcheck Floorspace9,0x2,6 M Total height2,1 M Weight8500 KG Extra SpecificationsMixing drum non perforatedDiscountMiscellaneous mixersSchepensDiscountMiscellaneous > Miscellaneous mixersBrand > Schepens What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

General SKU041H133 MakeTK Fielder Ltd Eastleigh, Hampshire TypePMA-800/2G Pharma Matrix Mach.No.2486 Year of construction1985 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume800 Ltr. Motor48 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Universal mixercheck Capacity800 Ltr Vessel sizesdia. 1300x600mm With covercheck InletDia. 220mm Pneumatic operated outletdia. 200mm Outlet180x320mm With jacketcheck With motor37,0 kW (400 V) With lump breakercheck With motor11,0 kW (400 V) Rotor speed2915 Rpm Information LocationBarneveld Floorspace3,0x1,6 m Total height2,5 mDiscountUniversal mixersTK FielderDiscountMixers > Universal mixersBrand > TK Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

3 roles standing mixer with control panel and mixer Manufacturer: King & Günther GmbH Type: Rexoplast Serial No.: 6306075 Year of construction: 1973 Mixer is equipped with Munkadur coating inside! In good condition!

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

On 4 castors-standing stainless steel mixing tank with propeller agitator Material: V2A (1.4301) Container has a hinged lid and a spout at the bottom with a valve DN 25 drawn forward. In very good condition!

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter

Dossys Tetra Pak Dosys System for Fruit Dosing before filling in Yoghurt Cups

Tetra Pak Hoyer Model : FF 2000 Used for : Ice cream Fruit Feeder Y.o.m : 2003 Condition : Very Good

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - / Contact us at -

1,216 liter turbo stirrer for spray cream 2 pieces with mixing table Characteristics: Volume container 1 1216 liters Volume container 2 1216 liters material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2700 mm Width 2000 mm length 6000 mm Number of feet 4 Description MJ UNI-HIGH Consists of 3 parts with pedestal Part 1/3 Mixing table Dimension: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/3, 3/3 per container with a capacity of 1,216 liters Dimension: Total height: 2,700 mm Cylinder height: 1,250 mm Inner diameter: 1,150 mm Container description: Topsoil: Lid with 1/3 flap at the front and back with grid Propeller agitator Underbody: Residual drain pipe connected to line 4 fixed feet on each frame

Stock# U2473-1 Used system for inline mixing powder with liquid. System consist of: - conical stainless steel AISI 321 feeding hopper with total volume about 4000 l, and working volume about 3800 l. Tank has top side wall feeding inlet with dimensions L 700 mm x H 350 mm, equipped with stainless steel lid closed on clamps. Tank has on conical side wall mounted vibrating device. Includes working platform with stairs. - inline liquid-powder mixer. Powder inlet connection 3". Mixing chamber has internal diameter 180 mm. Rotor is driven directly by el. motor 6.8 kW, 1455 rpm, 400/690 V, 50 Hz, in Ex design (Ex-IIC Exe IIC T3G6). Mounted on mobile stainless steel frame. - Stainless steel bag type dust filter by WAM in Ex design - Connection stainless steel pipes and valves.

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The dynamic in-line flow mixer type RM offers performance, precision and hygiene for the food, chemical and plastics processing industries and for numerous other process mixing processes.The performance spectrum of the dynamic flow mixer RM includes stirring, mixing, gentle mixing and blending, reacting, diluting, coloring, homogenizing and much more. Drive with tubular housing and mixing shaft running therein. Welded mixing elements. Mechanical seal. Vertical design with foot flange. It is a dynamic flow mixer that is suitable for CIP (Cleaning in Place). Capacity: up to 4.000 ltr/h. Lenght of the rotor: 425 mm. Inside diameter of the house 130 mm. Connections in / out: DN65. Motor: ± 3 kW (not visible on nametag) - 400 V - 50 Hz., Type of Machine: Inline mixer, Capacity: up to 4.000 ltr/h, Length of rotor: 425 mm, Inside diameter of the house: 130 mm, Motor: ± 3 kW (not visible on na ...

Plant Details - Plant manufacturer: Stetter - Year of construction: 1980 Main Components - 2 mixers, each 1.5 m3 capacity, model Teka THZ2250A (one fitted with Kniele rotor) - Control system: Simma CMS Control 8 - Scrapper: Elba RSA70, built in 1997 - Auxiliary heater: Certuss Junior 850 - Recycling plant: Klarfix KSW60, built in 1989 - 4 binder silos, each 100 tonnes capacity (2 of which are shared) Find more here - / Contact us at -