136,440 used machines on RESALE, but how to find them? Machine Search
used
GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSlide 1Longitudina ...
Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)
used
General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmMain drive 1Drive power (100% DC)40 kWDrive power (40% DC)52 kWSpeed range- 2500 rpmTorque (100% DC)1700 NmMax. torque (40% DC)2200 NmC-Axis Speed2500 rpmTorque of C-Axis (holding torque)1700 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 698 ...
This 4-axis SPINNER TC800 110MCY was manufactured in 2016. It features a Siemens control system, operating at a voltage of 400 V and a frequency of 50/60 Hz. The machine has a full-load current of 63 A and a nominal current of 80 A. If you are looking to get high-quality turn-milling capabilities, consider the SPINNER TC800 110MCY machine we have for sale. Contact us for further details.
This 4-axis Hurco TMX8MYS was manufactured in 2014. It features a tool turret and includes a main spindle chuck, sub-spindle chuck, and parts catcher. With a robust design, this turn-mill centre is ideal for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the Hurco TMX8MYS turn-mill centre we have for sale. Contact us for further details.
This 3-axis DYE RHE -3000 Bed Type Milling Machine was manufactured in 2009. It features a substantial table surface of 1000 × 3000 mm, with longitudinal travel of 3000 mm and transverse travel of 1500 mm. The machine is equipped with a grinding wheel diameter of 450 × 80 mm and a spindle speed of 1450 rpm. If you are looking to get high-quality milling capabilities, consider the DYE RHE -3000 machine we have for sale. Contact us for further details.
Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rigid angle table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications - Mount: SK40 - Speed range (infinitely variable): 40 - 2550 rpm - Travel X/Y/Z: 400 / 320 / 400 mm - Feed X/Y/Z: 0 - 2000 mm/min - Quill stroke vertical: 60 mm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1500 kg
Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg
x-travel: 1400 mm y-travel: 630 mm z-travel: 600 mm Control: Heidenhain total power requirement: 15 kW weight of the machine ca.: 5,85 t dimensions of the machine ca.: 1800x630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg
milling machine, year 1997, CNC 426. Used machine. More info & price on IndustrialBuyer.
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning ...
Ex-Cell-O XG620, Excello XG 620, Siemens CNC overhauled 2011, docs available, ball groove milling for CV constant velocity joints - homokinetic joints, This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)
Surface reference plates, roughness measures MASSI end milling machines TGL 4763 Rz 6.3 μm - Rz 80 μm in wooden box used, tested ! Dimensions: 345 x 125 x 35 mm
Used and unchecked; viewing desired Auction-ID: A1-50737-88
Key data: 600 mm, 525 mm, 200 mm
Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect
Key data: 600 mm, 525 mm, 500 mm
Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled
Key data: 600 mm, 525 mm, 500 mm
Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled
Key data: 710 mm, 520 mm, 520 mm
TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm
Milling machine, water slot milling machine, window production machine PERTICI UNIVER ML142 year: 1995 x, y, z- travel: 100 mm milling depth: 0 - 50 mm Operating voltage: 380 V Power: 0.50 mmbr /br / 6 kW - pneumatic workpiece voltage - manual feeds used, tested ! Dimensions: 1600 x 1000 x 1300 mm
Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible.
about 19500 meters Auction-ID: A1-50513-86
Surface comparison plate set, roughness measures MASSI Planing, face milling, turning TGL 4763 Planing: Rz 6,Rz 3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm
Milling head PAGUS Outer Ø thread: 41.8 mm square 10 x 10 mm used, tested ! Dimensions: 250 x 200 x 400 mm
Digital Display for Vertical Milling Machines ACU-RITE MillMate Dimensions: 280 x 175 x 160 mm
Milling cutter, H, schl. Zahnst. Group milling cutter FETTE K HSS E ( KHSSE ) Module 0.8 EW 20° DIN 3972 BP I
Car is in great condition and has all the documentation. Hardtop included Auction-ID: A3-46098-20752
End mills GEFRA u.a. HSS end mills 12 to 40 mm 43 pieces used, tested ! Dimensions: 400 x 200 x 100 mm
Angle milling cutters, indexable insert milling cutters WIDAX, HEINLEIN, WIDIA 01-000546-002-2 274.274.06.119.00 diameter: Ø 242 mm 6 cutting edges with 6 holders each for inserts bore: Ø 31 mm (milling cutter side) / Ø 21 mm / Ø 40 mm (rear) flange (rear) Ø 90 mm groove width (rear) 16 mm, Depth 10 mm New ! Dimensions: 250 x 250 x 90 mm
Milling cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm
Festo UP cross-section milling machine Clamping length / length milling profile: 200mm 7.5 KW
Cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm
Key data: 2500 mm, 1600 mm, 1000 mm
Stock number: 3949 CNC BED MILLING MACHINE Manufacturer: SORALUSE, Type: TL-25 Machine NO.: 101016, Year of manufacture: 1998 Specifications: Table size 2860 x 1000 mm Large table load 7500 kg Longitudinal movement (X) 2500 mm Transverse movement (Z) 1000 mm Vertical movement (Y) 1600 mm Spindle Taper 50 ISO Stepless spindle speeds 20-3000 rpm Spindle motor power 22 Kw Total power 38 kW Tool changer 30 stations Control Heidenhain TNC 426/430 CB Fabr. Controlled vertical head 2.5 degrees Spindle Hours 12272 Hours Rapid traverse 15 m/min Accessories: Cooling by spindle Chip conveyance. Cooling water system. Electronic handwheel Line measuring system Various accessories. Length: 9500 mm, Height: 3820 mm, Width: , Weight: Approx 25.000 kg
Milling cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm
Key data: 200 mm, 500 mm
Rolling mill in very good condition. Used. Without CE.
1994 Hacoba USK S1000 KSER Cone Warping machine Model: USK S1000 KSER YOC 11-1994 Condition: ready for use Working range up to 1800 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 1200 mm, 600 mm, 500 mm
Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.
OPS 550 from the company OPS INGERSOLL Funkenerosion, built in 2008. the machine includes adjustable feet and 3 chucks. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Good working condition Auction-ID: A1-47365-122
Stock number: 3951 PROCESSING Manufacturer: Haas, Type: VF-6B/40HE Machines NO.: 29222, Year of manufacture: 2002 Specifications: Table size 1626x711 mm Longitudinal movement (X) 1650 mm Transverse movement (Y) 800 mm Vertical movement (Z) 762 mm Spindle cone ISO 40 Spindle speeds 10000 rpm Controlled in axes 3 Operating hours spindle 17652 hours Accessories: Cooling by spindle Chip conveyance. Tool Measuring Length: 4000mm, Height: 3150mm, Width: 3000mm, Weight: 9800 kg
GOMAD FG-2 TOP SPINDLE MILLING MACHINE – year 2016 SPINDLE ROTATION 6000 - 18000 RPM. VERTICAL TRAVEL OF SPINDLE 125 MM VERTICAL TRAVEL OF TABLE 150 MM DISTANCE OF SPINDLE AXIS FROM THE BODY 760 MM HEAD TURNING ANGLE +45° -45° TABLE DIMENSIONS 1180 X 700 MM ELECTRO-SPINDLE SOCKET ER 32 BUSHING RACK COLLET FOR BURRS 01 -020 ELECTRO-SPINDLE 5.6 KW REQUIRED AIR PRESSURE 0.6 MPA DIAMETER OF SAWDUST EXTRACTION NOZZLE 80 MM SAWDUST AIR VELOCITY 25 M/S COOK 750 KG Find more here - .ucymachines/ Contact us at - sales@ucymachines
maximum number of results exceeded
please refine your search
100 € 
