mixing line for used for sale

equipped with checker plate landing/roof, 400V mixer, loose auger, Please note! Pick up by appointment Auction-ID: A1-43992-48

equipped with checker plate landing/roof, 400V mixer, loose auger, Please note! Pick up by appointment Auction-ID: A1-43992-49

equipped with checker plate landing/roof, 400V mixer, loose auger, Please note! Pick up by appointment Auction-ID: A1-43992-47

First vessel chamber pressure min./max.: -0.1MPa/0MPa, max. second vessel chamber pressure: 0.4MPa, min. process temperature: 0°C, max. vessel chamber process temperature 1/2: 100°C/152°C, vessel chamber volume 1/2: 241l/27l, vessel chamber test pressure 1/2: 0MPa/0.77MPa. Documentation available. An on-site inspection is possible.

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Water mixing and dosing device Langheinz Aquamix 32 Fully automatic water mixing and dosing unit with three inlets, demand-controlled flow and numerical input keypad Condition: new sealing rings, dirt screen and battery. Maintenance carried out. for connection to the drinking water network Intrinsically safe according to DVGW for mixing and dosing ice, city and hot water with automatically controlled flow that can be switched off Automatic Repeat and Partial Repeat numeric keypad 0-9 Housing material AISI 1,403 with 3 water temperature inlets

Equipment: Agitator,Condition: used,Volume: 30,000,Lower bottom: conical bottom,Design: standing,Standing shape: feet,Number of feet: 3,Diameter outside: 3,000,Cylindrical height: 4,550,Total height: 7,000,Manhole / dome: in the cylinder (approx. 340 x 440 mm), in the top floor (DN 500),Type plate: No,Equipment: Crane eyelets,Outlet: available,Remarks: we cannot guarantee the agitators,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Power: 9.50 kW,Speed: 35 tpm,Agitator: Armature stirrer,Voltage: 400/690,Bottom bearing: Yes,Current interferer: No,Agitator arrangement: on the

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45832-37

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45832-93

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min automatic material discharge, never used Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45834-248

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45834-6

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min automatic material discharge, never used Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45833-248

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45833-6

10x straight connectors 8x corner connectors 4x Angle Connectors 4x Profile Connectors + Remaining stock, craft box Auction-ID: A1-45889-2918

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system., Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce, Volume: 33000 l per tank, Max. pressure: 2 bar, Pump capacity: 28 m³/h, Operating temperature: 40 °C, Length: 2600 mm, Width: 2600 mm, Height: 8500 mm, Weight: 3900 kg, Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool, Material: stainless steel 1.4301, Position: free standing, Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps, Features: 2 zone frame cooling, ...

Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve, Additional title: Insulated stainless steel pressure tank for outdoor installation with a cooling , Capacity: 43100 l, Operating pressure: 4 bar, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Kieselgur mixing station comprising two vertical stainless steel mixing tanks, each fitted with a top-entry agitator and a central outlet., Additional title: Kieselgur mixing station comprising two vertical stainless steel mixing tanks, Capacity: 1300 l/vessel, Features: 2 stainles steel vessels with agitator, and podest, incl. fittings

Additional title: with carbonization, Vessel volume: 500 l, Vessel operating pressure: 1 to -0,15 bar, Vessel operating temperature: 130 °C, Features: flow meter (E+H), blending vessel with stirring unit (5 hl), control panel with push-buttons, carbonization with subsequent calming section, no pressure tanks, no panel

LPG forklift, gas forklift STILL type RX 70-16TSeries No. 517314G00021 Year of construction 2016Nominal load capacity 1600 kgLifting height 4920 mmFork length 1000 mmCarriage width 980 mmOverall height 2160 mmTotal width 1100 mmTotal length without forks 2200 mmNet weight 3040 kg- Triplex mast with full free lift 1550 mm- Hydraulic sideshift- LPG electric drive- 4-cylinder Volkswagen LPG engine with 30 kW- Hydraulic auxiliary steering- Front working lights- Reversing Warning light (blue)

Electric forklift JUNGHEINRICH type EFG 216Serial No. FN413671 year of construction 2011Load capacity 1600 kgLifting height 4800 mmFork length 1220 mmFork carriage width 980 mmOverall height 2120 mmOperating voltage 48 volt- Triplex mast with full free lift 1550 mm- Hydraulic sideshifter- 2 travel speeds- Battery from year of construction 2015, Type 06 EPZS C750 SC (48 Volt, 750 Ah)- Automatic charger, 48 Volt- 3-wheel solid rubber - Front tires 18 x 7-8, rear 140/55-9- according to the operating hour meter 14725 operating hours read-

Diesel - Forklift, Compact Forklift MORA Type M80CSFabr. No. 20087 Year of construction 2006Nominal load capacity 8 ton. Lifting height 3800 mmFork length 1800 mmFork carriage width 1460 mmOverall height 3030 mmTotal width 1460 mmTotal length without forks 3350 mmWeight 12740 kg- Duplex mast with 1950 mm free lift- 4 cylinders PERKINS diesel engine- Fully enclosed cab with heating- Electro-hydraulic tilting device for the cab- Hydraulic auxiliary steering- 2 front work lights, 1 piece

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 52.33 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1162

Battery from former Still Service Comes from Still RX60-30 with only 5,300 operating hours. With REMA 320A connector and Aquamatic water filling 1030x700x780mm Idle voltage measured uncharged with good performance of 85.03 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1050

Battery from former Linde service very good performance measured at 52.25V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1146

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.31 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1010

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 50.98 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1095

Battery from former Linde Service 1030x1000x800mm Voltage in idle mode uncharged 84.54 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1144

Battery from former Linde Service 1020x1000x800mm Voltage at rest uncharged measured with good performance of 83.39 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1056

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45450-3541

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.90 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1123

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.23 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1134

Light Freight Auction-ID: A3-43368-2146

Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as

Kistler 9041A Piezoelectric Force Sensor, Fz 90 kN Force Load Ring Item Condition: Used R12A5K2-5-PD (BOR) You can find more sensors - new and used - in our shop! International shipping costs on request!

• Ford Transit E-Transit electric panel van • Year of manufacture 2022 / Registration date: 29.12.2022 • 100% electric – no diesel, no petrol • Power 135 kW (184 hp) • Automatic transmission • Rear-wheel drive • Mileage approx. 60,800 km • Vehicle class N2 (3,900 kg gross vehicle weight) • Colour: Yellow (typical commercial vehicle) • 3 seats • 5 doors (incl. rear doors) • Large cargo space volume – ideal for commercial / transport / trade • Modern infotainment system with large display • Navigation system available • Electric windows • Central locking • Ready to drive Condition / Defects • Rear bumper (slight scratches) • Rear door handle is missing (rear!) • Interior with signs of wear • Seat cushion damaged (crack / wear) Contact: Julia Lorz– Surplex E-mail: j.lorz@tbauctions.com Phone: +49  ...

For lithium batteries from 82-410Ah REMA Battery Connector 400V plug Auction-ID: A1-45450-3587

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3683

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/F_cbkyU1IrY - Former Linde full-service device - Next service due in 878 operating hours - UVV valid until /2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Full cabin with heater and windshield wipers - StVZO lighting with turn signals for road approval - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-216

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/ES_siuCTPRE Former Linde full-service machine next service due in 498 hours next UVV not due until 02/2027 - Full cabin with heater and windshield wipers - 3rd + 4th valve; Fork adjuster with sideshift Auction-ID: A1-45450-203

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/K35-GDAbbRY - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 10/2019 80V 4PzS 500Ah, very good performance measured with 83.0V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Semi-cab with windshield wipers - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-45450-150

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/JivPa0CGnEU - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 02/2021 48V 5PzS 775Ah, very good performance measured with 50.3V - Triplex mast with full free lift - 3rd valve, sideshift - Side fall-out protection (can be easily dismantled) - LED front work light - Warning light orange - Safety light at the rear - Comfort seat Auction-ID: A1-45450-211

Charger 48V 130Ah with REMA battery plug and 16A wall plug Loading onto trucks no problem Auction-ID: A1-45450-3678