mixers and vacuum used for sale

Spectrophotometer KONICA MINOLTA CM-2500c CT and CM-700d, S/N 11010825

Consisting of a TBA 19 V100 200ml Base Filling Machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Straw Applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

4x various fall protection including 2x A/2 and 2x A Complete with some accessories lying in 2x PVC tool box and PVC fork box Auction-ID: A1-45866-31

Consisting of a TTB 19 250 ml base filling machine with a Tetra Pak CBP32 V400 Cardboard Packer and a Tetra Pak Straw Applicator SA 30. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of Paslode battery nail gun type Impulse IM65A S16 lithium, + 6x cardboard with nails length 63-80 mm with corresponding gas tubes, bucket with nails Auction-ID: A1-45866-90

Consisting of a TBA 8 LSC 1000ml filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Screw Cap TCAP 47 and a Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Planing and moulding machine with splitting unit Weinig Hydromat 1000 Spindle Assembly No. 002 Electronic feed 6-60 m/min. Technical data Working width (for tool flight circle 140 mm) 80-150 mm Working height (with tool flight circle 163 mm) 23-65 mm Finished slat widths4-15 mm Max. number of slats 16 pieces Slat lengths 400-4000 mm 6 spindles Auction-ID: A7-45928-2

Consisting of a TBA 19 200V 125 ml Slim filling machine with a Tetra Pak straw applicator TSA 21 Tetra Pak TrayPacker TCBP 70 Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Size per roll 1200x4100 mm, on pallet, + batch of insulation boards various thicknesses Auction-ID: A1-45866-15

Consisting of a REX TR/27 500ml and 1000ml filling machine with a Tetra Pak Cardboard Packer TCBP32. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of 2x level length 80+150 cm, +3x digital angle meter Nedo+Stabila Auction-ID: A1-45866-74

Batch of various addressed insulation in various sizes, some insulation boards including dimensions width 75 and 55 cm, length 250 cm Auction-ID: A1-45866-71

Key data: 63 KW, 73 kVA, 400 V

senergino Gas Generator (CHP) SBG 50EL 4.12 TI. E Gas electricity and heat generators from 2011 with unknown operating hours, closed unit with control. 63 KWel x 1,500 rpm, 400 V/50 Hz. Leroy Somer LSA 43.2L8 C674, 73 KVA Manufacturer: senergino Model: SBG 50EL 4.12 TI. E Type: Natural Gas Electricity and Heat Generator Serial Number: D2N002416 Power [KWel]: 63 Voltage [V]: 400 Current [A]: 105 Frequency [Hz]: 50 Year of Make: 2011 Operating hours: unknown Weight unit [kg]: 1,940 Dimensions LxWxH [m]: 2.95 x 1.00 x 2.20

Key data: 360 KW, 360 kVA, 400 V

2G agenitor 408 Complete Container CHP Fuel: Natural gas Commissioning: November 2022 Hours: 4328

Auction-ID: A1-45977-314

Auction-ID: A1-45977-318

Inner diameter: 220 mm Inner belt width: 200 mm Year of construction 02/90 Load capacity per reel is 150 kg, whereby the reel must be screwed to the ground. Weight approx. 450 kg Incl. wiring diagram Auction-ID: A1-45977-9

Mobile workbench with contents and attachment of Objekt-Systemfloor, contents including Makita cordless screwdriver, paint spray cans, fan heaters, banknote detectors, built-in cylinders, spacer blocks, Bosch cordless screwdrivers, clamping lamps, small parts, power distributors, paint spray cans Auction-ID: A7-45960-27

Lightly used, fully functional paving stone production equipment Year of manufacture: 2019 Power source: 400 V AC / 50 Hz / 3 PH Main breaker: 400 A Hydraulic pressure: 170 bar / 2465.65 PSI Pneumatic pressure: 6 bar / 87.02 PSI Power: 160 kW Highest manufacturable product height: 250 mm Required installation area (base area): approx. 32 × 18 m Required ceiling height: 8 m Capacity, Production per cycle: approx. 1.2 m² paving stone approx. 2.1 m² rustic stone (semi-finished) Production rate: approx. 1800 cycles per 8-hour shift 5 colors can be dispensed can be viewed under power for disassembly the manufacturer can give a quote For viewing or further questions Contact:  Email: gabor.racz@surplex.com Mobile:+36304509673 Auction-ID: A7-45970-1

Shelf contents of Geberit + VISA + Helios Sanitary and installation material, shelves, ventilation grilles, urinals, pipe insulation and connectors Auction-ID: A7-45960-4

Unchecked Auction-ID: A1-45973-56

as good as new current new price: 12,000 EUR at Heidenhain Auction-ID: A1-45977-20

Auction-ID: A1-45977-15

Pallet WC and bathroom accessories VIGOUR, shower heads, spouts VA, toilet seats, rosettes, soap holders and others Auction-ID: A7-45960-13

with nuts. and screw feed The workpieces, max. 100 kg or 25dm³, are stored in the automatic filing machine and sorted in the correct position. At the end of the sorting process, the workpieces are buffered on a linear conveyor rail and sent for separation. Behind the separation is mounted a corresponding transport hose and a blowing air nozzle. Only one workpiece is transported through the transport hose at a time. The electrical interface can be HAN plugs, BUS modules and valve terminals. Workpieces : Press-fit bolt M6 x 15 Max. feeding capacity: 15 screws/minute (1-lane) Maximum filling weight: 100 kg Maximum filling volume: 25 dm³ Voltage: 230 V Max. power consumption: 100 VA Auction-ID: A1-45977-10

Conference phone KONFTEL 200W, S/N 61214 R2B and JABRA 7510-409, external speakers, HDMI cable, webcam LOGI HD 1080p

Plaques Hameln and Goslar, width each approx. 55 cm

Euro coins various countries and years in total approx. 4.35 Euro

Circulation coins Hesse-Kassel I and II Heller, monogram Wilhelm VIII

Medals John Paul II and Benedict XVI Silver Plated

Coin Album Whole World German Empire Bohemia and Moravia Europe approximate 103 pieces

USSR 2x 1991 Moscow and St. Petersburg st, 1 Kopeka - 1 Rouble

Cleaning kit for lenses and mirrors, case

Stamps and badges Dom-Weihe Mainz 1928, 7x further badges partly foreign

Tokens Game Coins and Unknown Coins approx. 12 pieces

HYDRAULIC PUNCHING PRESS Inv. No. 13.190P1 Make GEKA Model HYDRACROP 50SD Mach.no. 8229 Capacity 50 Ton Punching Ø 28 in 13 mm Round cutting 40 mm Square cutting 40 mm Angle bar 120 x 120 x 10 mm Flat bar 200 x 20 mm Motor power 5 KW Weight 1110 Kg Auction-ID: A1-45737-180

Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coa ...

Heat Exchanger – Technical Specifications Tube side (RS): Volume: 60 L Temperature range: -10 to 165 °C Pressure: approx. 16 bar Shell side (MS): Volume: 65 L Temperature range: -10 to 110 °C Pressure: approx. 10 bar Expansion joint: Maximum pressure: 0.9 MPa (approx. 9 bar) Movement: ±6.5 mm Description: Industrial heat exchanger designed for operation under medium to high pressure and temperature conditions. The unit features separate tube and shell circuits with defined thermal and pressure limits, as well as an expansion joint to accommodate thermal expansion and mechanical stress during operation. Auction-ID: A7-46032-7

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1000 mm   grinding width: 600 mm   vertical travel: 350 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1360 mm   table surface (front-back): 550 mm   workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1000 /min   spindle revolutions (max): 6500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 500 mm   borehole: diameter: 203 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 91 kW   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (GRINDING)   coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast,  ...

Heat Exchanger – Technical Specifications General data: Total volume: approx. 300 L Nominal diameter: approx. DN250 Tube side (RS): Volume: 60 L Temperature range: -10 to 165 °C Pressure: approx. 16 bar Shell side (MS): Volume: 65 L Temperature range: -10 to 110 °C Pressure: approx. 10 bar Expansion joint: Maximum pressure: 0.9 MPa (approx. 9 bar) Movement: ±6.5 mm Description: Industrial heat exchanger designed for operation under medium to high pressure and temperature conditions. The unit features separate tube and shell circuits with defined thermal and pressure limits, as well as an expansion joint to compensate for thermal expansion and mechanical stress during operation. Auction-ID: A7-46032-8

A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible.

- electr. grooving and perforating machine - with the existing accessoies

cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N  compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area  with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment  - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Working width: 410 mm; Planing shaft: spiral shaft ; Number of knives: 66; dressing table length: 2020 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Display of planing strength: mechanical digital display; Feed speed: 5.5 / 10 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 5.3 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2020 mm; Machine width: 882 mm; Weight: 480kg;

Working width: 510 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2250 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: mechanical counter; Feed speed: 8 / 16 m/min; Feed roller: steel; Pull-out roller: steel; Pressure beams: link pressure bars; Motor power: 7 kW; Engine brake: yes, automatic; Suction port: 150mm; Machine length: 2200 mm; Machine width: 1050 mm; Weight: 900kg;

Working width: 410 mm; Planing shaft: spiral shaft ; Number of knives: 66; dressing table length: 2020 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: electric; Planing thickness display: Digital display; Feed speed: 5.5 / 10 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 5.3 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2020 mm; Machine width: 882 mm; Weight: 480kg;