129,501 used machines on RESALE, but how to find them? Machine Search
- Bread slicer bread gate - Manufacturer: Treif Maschinenbau GmbH - Model: Delfin - Year of construction: 2005 - Operating voltage: 230 volts - Rated current of the machine: 2.5 - Nominal power: 0.9 kW - Weight: 175 kg
Key data: 630 mm, 200 mm, 4 kW
gebr. Combined planing machine ALDINGER Type: U63 Built in 1957 Motor power: 4kW Drive via V-belts 2-Knife Shaft Strip Knife Max. planing width: 630 mm Max. planing height: 200 mm Table height adjustment by handwheel 2 feed speeds: 8 / 16 m/min. Table lengths: Dressing length: 200 cm Length thicknesses:110 cm Link feed roller Articulated pressure beams Pull-out roller steel 2 tabletop sliding rollers Adjustment of the dressing fence conveniently by handwheel incl. Gebr. Planer Knife Suction device: 160 mm Weight: approx. 1,200 kg Transport dimensions: LxWxH: 212 x 112 x 110 cm
Bread slicer Treif Varius 400 Bj: 2017 - Manufacturer: Treif Maschinenbau GmbH - Model: Varius 400 - Cutting width adjustable from 4mm to 14mm - Bread halving function for halving loaves of bread - for breads up to 40cm in length - Sickle knife Technical data: - 400 volts - 1.22 kW - Weight: 150kg - Year of construction: 2017 - External dimensions: 90x73.5x112cm WxDxH
Equipment: 1 pliers feed right 4 Carriage Units Working Range: Wire thickness range: 0.5 - 2.0 mm Band width: up to 10.0 mm Length of move; up to 100 mm Output: up to 300 rpm
A used Rego Herlitzius Kobold Bread Gate 9mm is currently for sale and immediately available in stock. Rego Herlizius Kobold 9mm Bread Slicer Bread Gate - Creel machine - on castors - with lubrication - Cutting width 9mm - for max. 42cm loaves of bread Technical data: - Manufacturer: HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61cm Depth: approx. 68cm Height: approx. 120cm
Key data: 2000 KW, 2500 kVA, 10500 V
2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number
L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle ...
Equipment: 1 Carriage Feed Right 1 eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Working Range: Wire thickness range: up to 6.0 mm Strip width: up to 80 mm Feed length: up to 250 mm Power: 10 - 250 rpm
Equipment: 1 piece BIHLER noise protection cabin 1 piece pliers feed right 1 piece eccentric press 70 kN 4 Norma sled units 1 piece narrow sled unit Working Range: Wire thickness range: 0.5 - 3.5 mm Strap width: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm
The machine is in perfect technical condition. Availability : immediately
PND CB8 automatic coring and wedging line for Apples Consisting of tank for apple collecting, automatic feeder, cutting station and waste conveyor Capacity 100-120 fruits / min 60-110mm size Machine dimensions 4450mm x 2100mm x 2530mm Power - 4.74 kw Air - 5 bar Consumption 90 NL / Min Wedges 6,8,10,12,14,16
Item condition: in working order, well maintained Availability: immediately
De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.
Item condition: in working order Availability: immediately Location: Lower Saxony Current type: 3-N-PE Frequency: 50 Hz Operating voltage: 400 V
Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.
Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic
WORKING AREA 3200 x 2100 mm, X and Z axis 200 mm SPEED X and Y AXIS 70 m/min, Z axis 20 m/min ISAC ITALIA CONTROL 21.5-INCH TFT COLOR SCREEN GRID-ENABLED CONTROL WITH ETHERNET AND USB CONNECTION - 9 kW ISO 30 COPDLE - 9-SPINDLE DRILLING UNIT - LAUNCH MANAGEMENT DRILL - 8-POSITION TOOL CHANGE - 2 vacuum pumps (250 m3/h) - 6 vacuum zones - Loading and lifting unit - Final cleaning unit for slabs - Conveyor belt unit for unloading workpieces - Alpha CAM CAD/CAM software - Alpha Software Cam xNesting - Security barriers to protect against unauthorized access
Used automatic sausage portioning and twisting (joining) machine, Vemag type LPG 208. New: 2011. Automatic sausage portioning and twisting (joining) machine, used in meat processing, which precisely twists sausages of various calibres to specific lengths, working with natural, collagen and cellulose casings, achieving very high performance (even over 2000 portions per minute). 400/460 V, 3 Ph, 50/60 Hz, 9 A, 6 kW. Dimensions: 1500 mm x 850 mm x 1300 mm.
Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg
Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.
For aluminium tubes (double seam, triple seam) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube feeding magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 heated hopper with electric heating, 1 single-walled hopper 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor control Connection 400V/50Hz Without transfer belt to the cartoning machine Has worked in lin ...
Used W&P bread roll line, type: MULTIMATIC MUC-5 with Super B Compact - Head machine / dough divider Multimatic MUC-5 - 5 rows - Up to 95g dough weight per dough piece - Proofer Super B Compact - for emperor and sliced rolls - with side discharge - The system was in operation until the end Visits and test runs are possible by arrangement.
Stitching, folding and cutting machine, Theisen Bonitz TB Sprint 808 08, machine number: 303QS2198, year of manufacture: 1998, 2 Hohner stitching heads, front cut, in good condition, available now
General Manufacturer: Monnier & Zahner Type: M651 Year of Make: 2007 Control: Fanuc Series 21i MB Travels: X 80 mm, Z 250 mm, A swivel axis +/-45°, W 250 mm Other axes: C-axis workpiece spindle, V-axis loader Working spindle Speed: 3,000 rpm Dimensions and weight Dimensions: 2,400 mm x 1,410 mm x 2,250 mm Weight: approx. 2,400 kg Condition Condition: Used Functional: Tested and fully functional
Key data: 70 KW, 63 kVA, 400 V
HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315
T type milling machine TIGER TMT 5 RT - CNC SELCA 4045 - head type T30 Index 2,5°, Rotary table capacity 6.000 kg, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1550x1300 mm, Maximum table load: 6.000 Kg, Cross travel x axis: 2000 mm, Vertical travel y axis: 1550 mm, Longitudinal travel w axis: 1050 mm, Working feed x-y-w axes: 0 - 60.000 mm/1, Rapid feed x-y-w axes: 12.000 mm/1, Spindle taper: 50-DIN69871, Spindle speed: 0 - 3000 rpm, Number of spindle speeds: 2, Cnc: SELCA 4045, Weight: 15.000 Kg
: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roll-off container TECHNICAL DATA: External dimensions: 7.28 x 2.46 x H 2.44 m Interior dimensions: 6.94 x 2.31 x H 2.19 m Suitable for garbage collection
This machine is ideal for use in bakeries, restaurants, or grocery stores. It impresses with its robust construction, ease of use, and consistent slicing quality.
Laminator Triplex solventbased Min. material thickness 12 my , Max. material thickness 120 my, Cylinder width 1300 mm, Material width = 1250 mm, Unwinder and rewinder (turnstile) Roll diameter max 1000 mm, Sleeve 152 mm, Speed (mech.) = 350 m/min
Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece ...
Sharpening range: up to 500 N/mm² 22 - 7.0 mm up to 1,000 N/mm² 21 - 8.0 mm over 1,000 N/mm² 20 - 8.0 mm Number of calibers: 10
Porter Lancastrian 5BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Single Skin Stainless Steel 1.5" RJTF Both Top and Bottom Ports Side Manway 2 x Sight Glasses 3 x Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
1000L Vessel Horizontal stainless steel Manufacture: Mueller (NL) Year of Manufacture: 2013 Diameter Approx 1000mm Height Approx 1100mm (including motor) Length Approx 2400mm Stainless Steel Single Skin Bottom Outlet DIN Butterfly Valve Working Pressure 3bar Pressure Gauge Stainless Steel Cradle/Frame with Four Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Cold storage tank 150HL Vertical cylindrical stainless steel vessel. Located out doors with external cladding and insulation finished in riveted stainless steel . Fitted with cooling jackets. Mounted on 4 stainless steel legs with adjustable feet Approx dimensions : Overall height 5000mm Overall diameter 2000mm Legs 800mm Capacity 150HL Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
This sterile tank manufactured by KHS is designed for the safe intermediate storage of beverages in aseptic production processes. The tank originates from an industrial beverage processing line and meets high hygienic and technical standards required in the food and beverage industry. Technical Specifications: Manufacturer: KHS Type: Aseptic Buffer Tank Year of Manufacture: 2007 Storage Medium: Beverages Capacity: approx. 18,000 liters Max pressure: 7 bar Minimum pressure: -1 bar Overpressure: 10.5 bar Temperature range: 20-130 degrees centigrade Material in touch with product: stainless steel 306 Design: Aseptic, food-grade, high-acid compatible Key Features & Benefits: Suitable for aseptic beverage processing High product safety and hygiene standards Robust and durable industrial design Ideal as a buffer or intermediate tank in filling and processing line ...
Key data: 230 mm, 460 mm, 25 U/min
Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...
A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless ...
Transnorm Rising falling Incline with arch and forerun belt conveyor 1000+10700+1000-600-500 RA2459 Technical data: Conveyor length (NL): 12700 mm (1000 mm forerun + 10700 mm incline + 1000 mm arch ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12700 ( 1000 + 10700 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...
CNC Ball Valve Grinding Machine Saporiti PV 500 Year of construction 2014 Siemens Sinumerik 840D Ball/sphere diameter: max. 500 mm Travels: X-axis 510 mm Z-axis 950 mm Y-axis +/- 1.5 mm Workpiece diameter x length: max. Ø 600 x 1,100 mm Workpiece weight: max. 1,000 kg Headstock speed: max. 200 rpm. Grinding wheels speed: max. 6,000 rpm. Water filter: 2,000 l Machine dimensions: L x W x H 3,300 x 2,500 x 3,000 mm Required footprint: L x W x H 7,700 x 6,000 x 3,100 mm Machine weight: approx. 15,000 kg Accessories: RENISHAW measuring system with Saporiti-specific software for easy centering of the tool to the ball A Saporiti PV-1000 from 2014 is also available. Condition: Is said to be excellent Offer number V-7140
CNC Ball Valve Grinding Machine Saporiti PV 1000 Year of construction 2014 Siemens Sinumerik 840D Ball/sphere diameter: max. 1,100 mm Travels: X-axis 1,150 mm Z-axis 1,350 mm Y Axis +/- 2 mm Workpiece diameter x length: max. Ø 700 x 1,100 mm Workpiece weight: : max. 6,000 kg Headstock speed: max. 200 rpm Grinding wheels speed: max. 1,200 rpm Water filter: 3,000 l Machine dimensions: L x W x H 8,000 x 4,100 x 3,500 mm Required footprint: L x W x H 9,100 x 8,200 x 3,600 mm Machine weight: approx. 36,000 kg Accessories: RENISHAW measuring system with Saporiti-specific software for easy centering of the tool to the ball Hydraulic system Coolant coolers Engine Radiator Coolant filter A Saporiti PV-500 from 2014 is also available. Condition: Is said to be excellent. Offer numb ...
A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.
turning diameter over bed: 1100 mm turning diameter over slide rest: 740 mm turning length: 6000 mm spindle bore: 110 mm turning speeds: 16-1600 U/min digital readout: faceplate: mm 3-jaw chuck: steady: total power requirement: 22 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Year of manufacture 1999 Control: Siemens 840D Turning length (mm) 6000 Max. turning diameter (mm) 1100 Max. turning diameter over slide (mm) 740 Spindle diameter (mm) 105 Speed 16 - 1800 (18x) kW 22 Voltage 380V Hz 50 3-jaw chuck ø (mm) ¦ 4-jaw chuck ø (mm) ¦ Fixed steady rest ø (mm) 2x Through-spindle cooling ¦ Multifix tool post The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, ...
turning diameter over bed: 630 mm turning diameter over slide rest: . mm turning length: 3150 mm hollow: mm Number:: 16304188/ turning diameter: mm weight: 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer you the following machines as a package. All machines are functional. Dismantling and loading must be carried out by the buyer. 1. Bag lifting system Manufacturer: Schmalz Year of Make: 2020 2. Bagging and packaging line consisting of: Palletizer Manufacturer: Europack Type: Winner 400 Year of Make: 2014 Load capacity: 25 kg, Static load: 1800 kg, Connected load: 400 V, 50 Hz, 3 Ph, Power: 7 kW Metal Detector Manufacturer: CEIA Type: T/MS21 Model No.: T/M: S21-550350031 Dimensions: 550 x 350 mm Bagging machine Manufacturer: VAI Type: V5/10S (special version) Year of Make: 2014 Connected loads: 400 V, 50 Hz, Power: 8 kW, Line weight: 2800 kg 3. Bagging machine Manufacturer: VAI Model: V5/10 Year of Make: 2009 Connected loads: 400 V, 50 Hz, power: 12 kW, system weight: 2800 kg 4. Bagging machine with metal detector Manufacturer: Chronos Ric ...
Key data: 20 KW, 400 V
Vaillant Gas Generator (CHP) Eco Power 20.0 Gas electricity and heat generators from 2016 with 52,214 operating hours, closed unit. 20 KWel x 1,540 rpm, 400 V/50 Hz. CHP Vaillant Eco Power 20.0 Manufacturer: Vaillant Model: Eco Power 20.0 Type: Gas CHP Serial Number: 21161100100186070936000041N6 Power [KWel]: 10 – 20 Power (50/30°C) [KWth]: 29 – 44 Year of Make: 2016 Hours: 52,214 Weight unit [kg]: 867 Dimensions LxWxH [m]: 1.90 x 1.05 x 2.00
Key data: 20 KW, 400 V
Remeha Gas Generator ELW 20-43 Gas electricity and heat generator from 2014 with 51,151 operating hours. Closed unit with control. 20 KWel x 1,527 rpm, 400 V/50 Hz. Model No.: ELW 20-43 R0048 Type: Gas Electricity and Heat Generator Serial number: SK0714A-ETWD-020136 AC generator (asynchronous): Weier DASGM 225/45 AC Generator Speed [1/min] 1,527 Engine: Toyota Power [KWel]: 10-20 Power [KWth]: 29-46 Voltage [V]: 400 Current [A]: 37.5 Frequency [Hz]: 50 Year of Make: 2014 Hours: 51,151 Weight unit [kg]: 880 Dimensions LxWxH [cm]: 165 x 105 x 200
1000 Litre Stainless Steel Second Hand Tank Capacity: 1000L / 220 Gallons / 6 Barrels Vertical Stainless Steel Vessel, with dished top and dished base Free standing on 3-off stainless steel legs with adjustable feet Working pressure 1 Bar Empty weight: 100kg approx. Fittings: 1 x DN40 Top Inlet 1 x 120mm Diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Keg Washer/Filler - Second Hand 2 head keg washer filler complete with beer carbonator manufactured by NT Teknik Type NM Keg 1-1 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
maximum number of results exceeded
please refine your search
