mixers and vacuum used for sale

Volume : 60 ltr. Material : areas in contact with the product in stainless steel

Hobart HSM10 planetary mixer Serial: 970197530 Planetary mixer, tabletop, with whisk attachment, variable speed, 1Ph

Hobart HSM40 Planetary mixer Serial: 970169619 Variable speed, 40l capacity, comes with two bowls and the whisk attachment, timer control, 3Ph

Carbonization Fabr. Wüma, for approx. 3,000 lt/h, built on VA base frame, with 1 VA tank 275 lt., pump and control cabinet, built in 1992 L: 2,000 mm, W: 1,000 mm, H: 2,200 mm Functionally obsolete

Product number: 2723 Type: MIX80P Serial number: 224635 Year of construction: 2002 Mixer: 80 litres Power: 3 x 400V, 50Hz, 0.75kW Dimensions: 700 x 900 x 1100 mm Tiltable bowl, 1 speed left and right

- Eirich RV 19 granulation / mixing plant, mixer, feed hopper, riser plate completely refurbished. Incl. -Steel construction - Screw conveyors - Input silo approx. 30 m3 - Steep conveyor

Agitator 0.37 KW 910 rpm and 4-leaf folding stirrer 50 / 150 mm for drums With crossbeam made of aluminum profiles 45 45 800 mm. Electric motor, 3 x 230/400 volts, 0.37 kW, IP55, 6 poles 910 rpm, With motor protection plug and shielded supply cable. Placed at an angle on truss. Stainless steel shaft D20, length 800 mm, diameter 20 mm, material 1.4571. With rigid coupling, bare, material stainless steel 1.4571 Impeller: Four-bladed folding stirrer, diameter 150 mm unfolded, 50 mm folded, for drums, material stainless steel 1.4571

Colloid mill Manufacturer: Probst & Class (PUC) Type: N/120/E No.: 84.025 Power: 6.5 kW very good condition LWH: 700 x 400 x 400 mm

Stock# UG6361 Used stainless steel double cone vacuum dryer blender made in China, type SYZG-50. Contact parts made of stainless steel AISI 316L. Total capacity of the chamber is 50 l. Working volume is up to 25 l and the load weight ranges from 10 kg to 25 kg. Drying chamber is designed to operate at a pressure up to -1 bar and is equipped with an internal vacuum pipe. The drum is covered with 2 kW electric heating mats and is insulated with wool and is covered with SS AISI 304 on the outside. Inlet and outlet are equipped with lockable covers. Drum working speed up to 6 rpm. The chamber is mounted on frame made of stainless steel. Device is equipped with an local electric control panel and a vacuum pump with a water ring. Overall dimensions: length 1500 mm, width 1250 mm, height 750 mm, weight 400 kg.

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Bear AR30 planetary mixer 30Kg stainless bowl, variable speed, stainless mesh guard, with beater, dough hook and whisk attachment, 3Ph

Bear AR40 planetary mixer 40Kg stainless bowl, variable speed, stainless mesh guard, with beater, dough hook and whisk attachment, 3Ph

Mixer Make: Skako Type: Apollo 750 Blender

Processing plant Manafacturer: Koruma Type: Disho V160/300 Filling volume: 300 l Batch volume: 240 l Year of construction: 1983 No.: 3143 Power: 18.5 kW with pneumatic vertical lift with pressure gauge & sight glass LWH: 1600 x 850 x 2200 mm

Laboratory processing plant Manafacturer: Stephan Type: UM-12 (universal machine) No.: 714.381.07 Power: 1.5 kW Year of construction: 1989 with various mixing tools and spare parts LWH: 410 x 400 x 600 mm LWH (housing): 950 x 450 x 360 mm

Jetstream mixer (Nameplate missing) Power: 2.2 kW Diameter: 130 mm Speed: 2870 rpm Powder feed possible LWH: 1300 x 500 x 450 mm

Jetstream Mixer Manufacturer: YTRON Power: 0.45 kW Year of construction: 1998 Diameter: 95 mm Speed: 1430 rpm Powder feed possible LWH: 1100 x 250 x 250 mm

Jetstream Mixer Power: 2.2 kW Diameter: 105 mm Speed: 2810 rpm Powder feed possible LWH: 950 x 250 x 250 mm

Mixer Manufacturer: VEM Gearbox: Stöber speed-controlled LWH: 1200 x 200 x 200 mm

Blade mixer No.: 1914872 Power: 0.25 kW Gearbox: Stöber

Propeller mixer Manafacturer: Lightnin Type: HP-18 ID: W40608 Power: 0.18 kW Gearbox: Brook Crompton Parkinson Motors with claw (for attachment to the vesssel) with start-stop control LWH: 250 x 150 x 950 mm

Dissolver mixer Manufacturer: sem Gearbox: Moteur Asynchronous Power: 0.37 kW with claw Dissolver head diameter: 100 mm LWH: 350 x 350 x 950 mm

Blade mixer Gearbox: Stöber No.: 1914873 LWH: 200 x 150 x 1000 mm

Blade mixer Manufacturer: SEW-EURODRIVE Type: FAF 47 DT7104/1F Power: 0.37 kW Speed: 1380 rpm LWH: 210 x 300 x 1550 mm

Propeller mixer Manufacturer: SCABA Type: 30 VA Power: 0.75 kW in EEx Protection very good condition LWH: 350 x 350 x 2200 mm

Dissolver mixer Manufacturer: Loher GmbH Type: eA132SA-61 Power: 2.6 kW Diameter dissolver disc: 350 mm in EEx Protection Speed: 960 rpm LWH: 400 x 400 x 1700 mm

Propeller mixer Manufacturer: SEW-Eurodrive Type: RF 40 EDT9034 Propeller blade diameter: 250 mm LWH: 320 x 320 x 1550 mm

Propeller mixer Manafacturer: ABB Propeller blade diameter: 250 mm in EEx Protection LWH: 300 x 300 x 800 mm

Propeller mixer Manufacturer: FLUID (Lörrach) Type: SD 40.12A No.: 98.30893.10.1 Power: 1.5 kW Propeller blade diameter: 300 mm Speed: 1410 rpm with on/off button, with plug LWH: 450 x 280 x 1650 mm

Hobart H600 Planetary mixer Planetary mixer, 60L stainless bowl, whisk attachment, variable speed, with timer, 3Ph

Powder dispersing plant (powder mixer) Manafacturer: Frystam Shear Pump: Type: FSPE 3532 D No.: 0574460006 Power: 11-22 kW Centrifugal pump: Type: FZ 20 A Power: 7.5-11 kW complete system on a mobile frame with integrated hopper(diameter: 690 mm); Capacity: approx. 65 l with inlet and outlet with sight glass with control cabinet in EEx protection Condition as good as new, rarely in operation LWH: 1350 x 900 x 1050 mm Weight: approx. 350 kg

Corundum stone mill Manafacturer: Koruma Type: 5-E Item no.: 3046 Year of construction: 1982 Power: 44 kW with screw pump (speed-controlled) overhauled and with new bearings with oulet chute & sight glass with control cabinet mounted on frame LWH: 2000 x 800 x 2000 mm

We sell here a tumbler / vacuum tumbler from the manufacturer Henneken, type C in a very good used and functional condition. Runs on 400 volts, approx. 2500 litres, completely stainless steel, analogue control, loading or emptying from two sides, workshop tested, immediately ready for use, dimensions W/D/H 190/250/200 cm, others on request.

Processing plant Manafacturer: Koruma (Nameplate missing) Type: Disho V160/400 Filling volume: 400 l Batch volume: 320 l no vacuum no double jacket with control cabinet, recirculation line & three-way valve LWH: 1500 x 1050 x 1550 mm

Processing plant Manafacturer: Fryma Type: Disho VK-300 (Nameplate missing) for cold production, without double jacket new control system, with Siemens touch panel with wiring diagram on request: with vacuum pump good condition LWH: 1650 x 800 x 2500 mm Weight: approx. 800 kg

Free-fall mixer Stainless steel drum Angle adjustments of the drum and emptying possible via lateral adjusting wheel Volume: approx. 140 litres Voltage: 230V Weight: approx. 96kg The machine comes from a mill in which it was used to mix flour. Accordingly, residues are still present and the machine must be thoroughly cleaned before use The lid does not close 100% tightly and the sprocket has already been repaired

Used dissolver Kofama MD600. New 1980.

Stock# UG6367 Used stainless steel contact parts planetary mixer by Tonelli, Universal Model P300 (IT). Machine has two agitators and is equipped with three mobile stainless steel mixing pans, each with volume 300 l. Last time used in food industry.

Planetary stirrer / stop machine VODSCHOW, type: Varimixer BÄR R 60 -in bakery condition- - for 60 liter bowls - Incl. 2 stainless steel kettles - Incl. 2 tools made of stainless steel (dough hook, whisk) - Dimensions: 90 x 50 x 135 cm -El. Connection: 3x 380 V, 50 Hz, 4.0 A - Engine power: 2.25 hp Inspection and test run possible. Price on request.

Manafacture: Eirich Type: R7 Dimensions: 1300 x 1400 x 1900 mm Weight: ~ 1200 kg Year of construction: 1979 Condition: renovated Industrial mixer for mixing powder, suitable for continuous operation. Mixing: Drum and paddle mixing Inner container size: 690 x 370 mm Usable volume: 30-75 l Electrical data: 15+3 kW; 25A; 50 Hz

Powder disperser Manafacturer: Ystral Type: C18.500 S EXD / Conti-TDS-3 in Ex version Year: 2003 Power: 18.5 kW Engine number: 426634001H on a mobile frame Condition: as good as new with two powder inlets LWH: 1500 x 600 x 1100

Batch Mixer Dinnissen, with two paddle shaft, 10.000L

The versatile mixer from RUHLE allows products to be blended or marinated in a short time. This universal blender with removable blender arm is ideal for meat, poultry, fish, vegetables, fruits, nuts, and other foods. It is equipped with a built-in vacuum pump. TECHNICAL: - Manufacturer: RUHLE - Type: MTR 130 - Year: 2003 - Capacity: 130L - Manually tiltable - Voltage: 400 V (3+N, 50 Hz) - Power: 1.1 kW - Amperage: 16 A - Weight: 200 kg - Manual failover - Machine dimensions in mm (D x W x H): 750 x 1000 x 1300 mm

Propeller mixer Manufacturer: EKATO FLUID (Lörrach) Type: SM 31 Item no.: 99.38466.10 completely in EEx protection Power: 2.6 kW flexibly swiveling speed-controlled, continously variable with control cabinet condition as good as new height pneumatically adjustable on wheeled castors LBH: 1100 x 650 x 1900 mm

Bär Varimixer Planetary Mixer Specifications: Type: Varimixer Built in 1999 max. 100l 2 stainless steel kettles with wheelchairs with whisk with agitator blade 1x Timer Very robust and stable Height: 150cm Width: 70cm Depth: 100cm

Used dissolver made by Kofama, model MD500, 500 liters.

Glass VSM150 Mixer Serial: 2941 150Kg glass mixer, tilting for discharge, stainless lid and sight hole. For marinating and massaging the meat and mixing of liquid, semi-solid and powdery products, with easytouch interval switch for 10 programmes with timer and rest settings, with ,manual, mobile, 3Ph

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished "scotch brite" type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressu ...

Volume : 1250 ltr. Material : areas in contact with the product in stainless steel Top condition !