mixers and vacuum used for sale

1 AUTIMAK folding and bagging machine type M-300, year 2011 (machine has never been intensively used and is like new), Compact machine for folding and bagging of textile garments like t-shirts, shirts, scarves, heads, carves, towels, cleaning cloths, etc... Size adjustable from children to adult sizes. It uses standard bags with flap for heat-sealing. Otherwise it can use standard bags with self-adhesive on the flap. Possibility to use cardboard supports. Adjustable folding dimensions and bag size. The bag is heat-sealed with a Teflon protected blade which can seal polypropylene. It has a temperature controller for the heat-sealing blade. Garment counter included. The production is 600 T-shirts per hour with only one worker. It can fold and bag 2 T-shirts at once, doubling production speed. Bag dimensions: 25–30 cm wide x 32-38 cm long.

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Electronic water dosing device with temperature display Your advantages: fast and exact input of the water quantity Clear control panel with large, bright display compact and flour dust-proof stainless steel housing easy connection to an ice water system with Automatic Wiedehol Technical data Dosing volume range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 ltr./min Water connection: 3/4" external thread Power connection: 100 - 240V ; 50hz Dimensions W x H x D: 200 x 300 x 130 mm Visit our Milbrandt Outlet with many bakery machines and appliances!

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

New machine 24-month warranty Benefits: + TOP value for money + Horizontal cutting machine, ideal for hamburger buns / rolls & cake bottoms + also suitable for cutting /halving baguettes, flatbreads, white breads + Products are guided with conveyor belt to the cutting station + comes with 3 cutting knives, double and triple cutting possible + Adjust cutting height in 5 mm increments + Machine on a robust, mobile frame, with locking wheels + equipped with two safety protective grilles + with upper transport/feeding belt + Tape speed can be controlled by rotary knob, for optimal adjustment of cutting results + with cleaning brushes on the conveyor belt + with quick coupling for belt cleaning + with pull-out collecting plate on the output belt + fast spare parts supply within 1-2 business days Technical data: - max product height: 90 mm - Bandwidth: 405 mm - Band spe ...

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

Full automatic video inspection and packaging system for plastic caps. Different sizes. Include elevators, hopper ZALKIN, two camera video inspection COGNEX, packaging system.

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

Complete coffee roasting and packaging line consisting of: coffee bean silos, coffee roaster, coffee mill, vacuum packaging machines (125 gr, 500 gr , 1000 gr) Price new 1.200.000 Euro For sale, price on request

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

Reich cooking kettle Kochmeister K 300 E, 300 liters, directly electric heated, control UNITRONIC MKA 110. You are very welcome to test the machine in Koblenz, Germany.

Pester Straff-banding machine type Pewo mat 450SN Bundle Packers pester PEWO-Pack 450 SN Stretchwrapper -Modified in 2016. -Memorized (max. mm): - Insert length 300, - rack width 540, - rack 250, - seal width 450, - power: 24 cycles/min. -With shrink tunnel PEWO-therm II, passage height 130 mm, machine is with new hardware and software Mitsubishi operation via touch panel and new paint in silver offers. Infeed conveyor with Stacker in the direction of the production flow with 90 ° high thrust

Fully reconditioned can filling machine for soft drinks and beer. Machine housing sandblasted and repainted. All seals and parts subject to wear new. Pneumatics and Electronics new (Siemens S7) Canned format: according to customer wishes upto o, 5 l

Producer: Bizerba Type: S-110 Connection: 230 V Steaker and strip cutter BIZERBA type S-110 -40 round knife -Blade spacing 4 mm Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...

Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

Various air-, oil- and fuel-filters, starter engines and alternators to be sold as package after inspection and price negotiations. Please arrange appointment with Mr Kottowski

Neri/Marchesini/Garvens/Multipack labelling & packing line for round plastic bottles consisting of: Bottle infeed table, Neri SL 400 self-adhesive labelling machine for bottles, etc., suitable for containers with a diameter from 15 to 80 mm, label height from 10 to 120 mm, conveyor width 80 mm, capacity up to 220 bottles per minute, bottle outfeed table used as a buffer, Cognex camera inspection of the print of the variable data (batch no., expiry date, etc.) on the labels, Marchesini MA155 horizontal cartoner, continuous motion, carton size range: A: 25 – 100 mm, B: 15 – 85 mm, H: 65 – 190 mm, capacity up to 140 cartons per minute, GUK leaflet folder from stack, bar code reader for leaflet, carton and presence of leaflet in the carton, Garvens S2 inline checkweigher with reject device and reject container, weighing range up to 300g, Multipack F40 collator & stretch bander for car ...

Performance: 80 packs / min. Dosing range: 100 to 250 g. Products: Butter, margarine, etc. Used, completely overhauled.

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Dimensions (L,W): - mm Weight: - kg adjustable height (yes/no): ja 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 Working height: 2500 mm : 300-800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Knee lever shears for sheet metal Cutting length 15 cm maximum sheet thickness 3 mm Built in 1982 L x W x H: 50 x 40 x 150 cm Weight approx. 50 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

With cup forming station for 15 cups Cup format: 33 mm x 51 mm, height variable depending on the weight Cutting dimension 41 x 59 mm with pull tab Volumetric dosing unit with 15 measuring points for 10 to 30 grams, weight adjustable. Product hopper approx. 50 litres Performance: max. 30000 cups/h depending on the product consistency is suitable for the filling of honey, butter, jam, etc. With carton packer Hassia. Used, complete overhauled.

With tool for 6 cups. Cup sizes: round 45 mm, height variable depending on weight requirements. Die size: round 53 mm, with pull tab. Dosage: volumetric, 6-cups, 10 to 20 g, weight adjustable. Product hopper approx. 50 litres. Capacity: 9,000 cups per hour depending on the consistency of the product.

Year of construction: 1980 Running direction: Left – right Pitch: 95 mm Siemens S7 controller, Danfoss frequency converter With a stainless steel control cabinet. Equipped with 3 sets of parts for the following bottles: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP capable. With electric height adjustment. Modernization and service by arrangement. The machine is in good condition and still in operation. A visit is possible by arrangement Year of construction: 1980 Working direction: Left – right Pitch: 95 mm Siemens S7 control and a Danfoss frequency converter. Installed in a stainless steel switch cabinet. Equipped with 3 bottle guiding parts for: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP able. Height adjustment of the filler bowl and closing machine by electrical gear motor. Reconditioning /  ...

NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-

automatic chamfering and beveling machine Development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle - automatic switch-off in case of repeatable chamfer lengths - Colour touchscreen control panel - max. spindle speed 3,000 rpm - Rod diameter 8-80 mm - hydraulic 3-jaw chuck - Cutting head suitable for all material sizes - quickly replaceable ISO inserts - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - 4 kW motor - High-precision Mitsubishi servo drive - Ball screw with high thrust capacity - Large machine door - Internal, powerful LED work light - Shavings collection container with external shavings basket - Lifting points for pallet trucks - Weight 500 kg - Dimensions L/W/H 1000x600x1200 mm CE - certified

Used KRUMBEIN TKSM vertical slicing machine. Year of manufacture 2017. Length 1500 mm Width 1390 mm Height 1940 mm Weight 275 kg Max. product size 600 x 600 mm Electricity 230/400 V 50 Hz 3 Ph Power consumption 0.8 kW Voltage 24V DC Description: Within each program, we can freely set a number of parameters such as product diameter and height, slicing speed (in the initial, middle and final phases separately), knife exit speed from the product, knife temperature, slicing depth (complete cut or shallow cut only), knife cleaning frequency. The change of the working system from slicing round to lengthwise products is done manually Performance depends on the type of products to be sliced, their structure and temperature, and the number of portions. Double blade system for gentle and precise cutting. Heated blade. Quick return on investment due to minimal human labo ...

Used weighing and packaging machine used for packing granules by TÉCNICAS MECÁNICAS ILERDENSES SL. model ILERSAC LBSD. New 2013. TECHNICAL DATA: PRODUCT CHARACTERISTICS: - Product BLACK COAL IN PROSPECT. - Density 340 / 645.16 kg/m3 - Fluidised Yes - Granulometry 30 µm - Sack type PAPER - OPEN BAGS - Bag weight 12 kg - Dimensions of bag 740x500x160mm - Dimensions of CP1 pallet 1200x1000x150 - Maximum pallet height 1800 mm Maximum production of 90 bags/hour CONNECTIONS: - Electrical connection 380V III+N+T 50 Hz - Installed power 12 kW - Control voltage 24 V - Air pressure 6 bar - Air consumption 150 NL/min. - Aspiration 1900 m3/h - 21 m/s Main features: - Programming of reading stability conditions. - Programming of weighing cycle and autocorrection parameters. - Zero variation detection range. - Precision: 5000 homologated divisions. - 50 operating reci ...

REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050  ...

P134 - used approx. 40 m³ / 40,000 L polyester tank, GRP tank, lying on steel bases, good condition. Technical details: Capacity: approx. 40 m³ / 40,000 litres Material: Polyester / GRP Manufacturer: Reich-Tank Dimensions: approx. Ø 3.00 m × L 6.50 m / H incl. base 3.70 m Miscellaneous: Used polyester tank, professionally cleaned and in good condition. Above-ground tank on 2 steel bases, dome and all connections on top of the tank body. Pictures from the inside will follow. Only the pure tank is sold, without attachments such as pipes, fittings and accessories. The tank can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price on request. Transportation can be arranged at a reasonable price. It is not possible to update all our  ...

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YO ...

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. Bof7x8gtdey The price quoted is net plus 19% VAT. OUR USED EQUIPMENT S ...