mixer used for sale

Spiral mixer Diosna SP 160 D Capacity in dough: 160 Kg  Capacity in flour: 100 kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Kemper SPL 75 Capacity in dough: 120 kg Flour capacity: 75 kg Automatic timer with two clocks Two speed settings Wheel clockwise/counterclockwise rotation Mobile with brake

Spiral mixer Diosna W 240 A Condition: cleaned, serviced and checked Dough capacity: 240 kg Flour capacity: 150 kg Bowl capacity: 370 l Gentle dough kneading at a lower temperature Suitable for all types of dough Scraper with temperature sensor PT100 Digital control Incl. 2 vat wagons

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Used Schroder massing machine type MAX 600. Year of manufacture 2002. Acid-resistant design.

Voltage 380 V, power 6 kW, capacity up to 120 kg, incl. 2x mobile boilers with diameter 800 mm (overall dimensions 920x840x810 mm) Auction-ID: A7-45702-1

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...

30978-0181. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-26

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-147

S/N:PM20VPB913258. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-41

Missing front wheels Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-146

BOLDT BFMA double-shaft paddle mixer – 220 L – stainless steel – year of manufacture 2007, Industrial double-shaft mixer with 2 rotation directions and front discharge, ---------------------------------------------------------------, Machine description, For sale is a BOLDT BFMA double-shaft paddle mixer from the year of construction 2007 in Stainless steel version., The machine is ideally suited for homogeneous mixing of:, - powder, - Granules, - spice blends, - Paste products, - Food and non-food products, The counter-rotating mixing shafts achieve a particularly even and gentle mixing., ---------------------------------------------------------------, ⚙️ Technical Data, - Manufacturer: BOLDT, - Type: BFMA, - Year of manufacture: 2007, - Gross content: 220 liters, - Net weight: 170 liters, - Material: completely stainless steel, - Discharge: 2 Frontentleerungsventile, - Mixin ...

NiroTech RX200 Twin shaft paddle mixer Serial: 3052022 2022, Stainless, twin shaft paddle mixer, variable speed, forward and reverse, guarded lid, manual discharge door, 3Ph

ATIKA concrete mixer, details n. known, nameplate n. legible

2-Shaft Mixer; with tilt function; Lining and kneading wings are made of stainless steel, 2-Z-shaped kneading blades; Length 2.90 m, width 1.30 m, height 2.10 m, trough size 64 x 69 x 55 mm Engine type ZG4 KMR 132 S4; Motor power: 7.5 kW; Motor voltage: 380/ 660 V; Rated speed motor: 1435 ... 1480 rpm; Output speed (gearbox): 160 rpm. The plant was shut down in 2024. more photos on request

Equipped with 2 vertical mixing augers; each mortar equipped with 7 knives; 3 dosing slides; weighing device; Auction-ID: A1-40135-236

Range of mixer taps + waste fittings Hansa, 18 mixer taps, cardboard box with connector + rosettes, waste fittings + plugs Auction-ID: A7-45960-32

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Additional title: in various designs

Carnitech double shaft paddle mixer-grinder, type: 3224, number: 2391900, year of construction: 2004, 400 V, 3 Ph, plate diameter: 210 mm, total dimensions: 2700 mm x 2260 mm x 2200 mm. Including s/s trolley with knives and plates, dimensions: 1010 mm x 700 mm x 1000 mm.

ID3780 STS Scheltzke MS2-700 E-A-AUT year/Baujahr 2021 approx. 900 hours/hours Fully automatic mixing station, continuous twin-batch mixing plant, total batch capacity (mixers 1+2): 36 m³/h, total power consumption: approx. 30 kW Fully automatic mixing station, continuous double-batch mixing plant, total batch output (mixer 1+2): 36 cbm/h, total power consumption: approx. 30 KW

Nowicki Vakuum tumbler -Typ: MA-G-5400 -Kapazität: 5400 l -Max. Beladung: 2700 kg -Mit Kühlung -Antriebsleistung: 8,2 kW -Gewicht: 2900 kg -Abmessungen: 4150 x 1900 x 2350 mm -Stromversorgung: 3 x 400 V -Aus Edelstahl -Einsatz mit Band- oder mechanischer Beladung -Verfügbar: 2 Stück -Zustand: Gebraucht, sehr gut, generalüberholt, sofort einsatzbereit

Tumbler Henneken -Capacity: 2000L -Dimensions: 2400 x 1500 x 2100 mm -Busch vacuum pump -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work

Tumbler Lutetia -Type: 1 -Power: 4 kW -Capacity: 950 L -With documentation -Weight: 800 kg -Working capacity: approx. 400 kg -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Drum diameter: 970 mm -Dimensions: 2180 x 1200 x 1820 mm -Condition: Used in very good condition, overhauled, ready to work

Equipped with: feed mixer RX 9.15 M – 12 m³, tyre size 445/65R22.5, year of construction 2012, CE marking, year of construction: 2012, tank capacity: approx. 15 m³, own weight: approx. 5,300 kg, gross permissible weight (GVW): approx. 10,800 kg, axle load: 12,000 kg, support load: 2,200 kg, PTO speed: 540 rpm, hydraulic pressure: 150 bar, single axle, hydraulic support leg, weighing device, hydraulic discharge conveyor front, serrated cutting blades on auger, front left discharge, Double vertical mixing augers, hydraulically operated unloading conveyor / cross discharge, electronic weighing installation (display available). Auction-ID: A1-40136-183

Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork J ...