mixer vertical used for sale

ALL STAINLESS STEEL Hopper capacity : 300 l Two levels of hopper Two working shafts with paddles Front discharge of ready product in 200 l trolley Programming controller Power – 4 kW Machine dimensions in cm: Width: 95,0 Length: 154,0 Height: 156,0 Weight - 500 kg OPTION :Loading unit 200l trolleys: Column loader dimensions in cm: Width: 110,0 Length: 120,0 Height: 238,0 Column loader power 0,8 kW

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...

Complete plant for the production of tile adhesives.

USED GLATT STAINLESS STEEL 1000 LITRES BICONICAL MIXER REF.: C6525 Bicone mixer made of stainless steel manufactured by GLATT with a total capacity of 1000 liters. General characteristics: Manufactured by GLATT Type Biconical mixers Material Stainless steel Year built 1998 Weight 1030 kg Transport dimensions: Total height: 2200 mm Total length: 2430 mm Total width 1500 mm Bicone dimensions: Body diameter: 1300 mm Body height: 350 mm

USED MORTON FM-130-D 130 LITRES PADDLE BLENDER REF#: C5058 Morton mixer model FM-130 -D manufactured in 316L stainless steel with agitation type plow blades and a choper in the body. An inspection door with flange for product entry and inertization system or option of adding liquids with manual closures. On carbon steel bedplate and electric panel General characteristics: Manufactured by MORTON MACHINES CO Model FM-130-D Year built 1987 Technical characteristics: Capacity 130 L Shovels +

Used Menger / spiral shaft mixer THURINGIA FOOD TECH, type: VM 1000 -Refurbished- - Newly overhauled in 2019 - Equipment also for vacuum with lid - intensive, gentle mixture in a short time - Operation via touch panels (german) - completely made of stainless steel 1.4301 excluding drive elements, seals, controls, etc. - Consisting of stand, mixing trough, drive - Mixing trough is arranged horizontally - the mixing spirals are arranged horizontally against each other, Mixing principle against each other in the interval - Emptying in 200 l wagons according to DIN 9797 - Mixing time infinitely variable via PLC 7 - Interval time infinitely variable via PLC 7 - Speed outer mixing spiral adjustable via PLC 7 - Speed inner mixing spiral adjustable via PLC 7 - Connection: outer spiral 11 kW frequency-controlled, inner spiral 7.5 kW frequency-controlled Specifications: - Hopp ...

Type: S 250 l 2P Complete stainless steel Hopper capacity 250 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 2.2 kW + 2.2 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of the machine in cm: Width: 155 Lenght: 70 Height: 105 Delivery time: after advanced payment, one working day

Type: S 300 l 2P-V Complete stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 4.4 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of machine in cm: Width: 135 Lenght: 84 Height: 142 Delivery time: after advanced payment, one working day

Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Height: 142 Delivery time: after advanced payment, one working day

Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Lenght: 65 Height: 100 Delivery time: after advanced payment, one working day

Double paddle mixer,stainless steel,standing on wheel rack,with control panel.

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

Mixer MBK Volume: 250L Dimensions: 1400 x 900 x 1300 mm Inside diameter: 800 mm Inner height dres: 500 mm Constructed of stainless steel One run Cover with the so-called plexiglass Stock status: 1 piece Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

REF-1923 MEAT KNEADER-MIXER 400L Double-shaft paddle mixer with double rotation Equipped with two 7.5 hp geared motors Tank dimensions: length 80cm, width 80cm, height 60cm. Overall dimensions: length 180cm, width 100cm, height 150cm. Tank capacity: 400 litres

Vakummic Stephan Type: VM 100 for 100liter made of stainless steel analog control with timers Boiler is tiltable excellent for mixing ingredients/ salads/ minced meat on rolls Condition: Good

Batch mixers Previously used for building materials

Agitator RW151000300: 1.5 KW – 1000 rpm. Electric motor: Electric motor Siemens or WEG 1.5 KW, 6-pole, 3 x 230/400 Volt, 1000 RPM, IP55. Weight approx. 30 kg. With motor protection plug. Suitable for frequency converters. Shaft: precision stainless steel shaft D30, length 1000 mm, diameter 30 mm, Material stainless steel 1.4571. With rigid coupling stainless steel 1.4301. Agitator: 4-leaf inclined blade stirrer diameter 300 mm. Material 1.4571. Suitable for larger containers of breweries, dairies etc.

Large capacity mixer. Its condition is of occasion equipment completely revised and reconstructed, in its entirety (re-release) guaranteed. the mixer, mixer, vacuum massager of the Spanish manufacturer Sia, model AM-352-A. Characteristics: they consist of a cylindrical container and hemispherical bottom, inside which and in the middle of an intense vacuum, some blades rotate (in both directions, at will or automatic), which produce a double movement of the paste, in crossing and alternative overlap, which allows kneading, mixing and massaging all kinds of pastes, without pressure, without friction, Bruising or harmful heating, in addition to distributing perfectly and in a minimum of time, all the components of the mixture. These qualities stand out above all the kneaders-mixers-massagers on the market. On the other hand, and as a consequence of the depression created and the extracti ...

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished "scotch brite" type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressu ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Minimix stand alone lab mixer machine. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Nauta Minimix is a gentle conical screw mixer, specially developed for R&D work ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Cyclomix lab mixer. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Mini Cyclomix lab mixer is a stand-alone, high shear batch mixer with exchangeable product bowls,  ...

Spiral mixer Kemper SP 150 AL completely overhauledDescriptionA completely overhauled spiral mixer Kemper SP 150 AL with 2 extendable stainless steel bowls.The machine is completely overhauled and repainted. The machine's entire electronics including control cabinet, timers, buttons and wiring have been renewed. Manufacturer: Emil Kemper GmbHType: SP 150 ALProduction: completely overhauledMaterial: Kettle and spiral made of stainless steelThe spiral mixer is completely overhauledAll electronics (relays, timers and buttons, etc.) are newAll V-belts are newThe electrical box is newAll ball bearings are newWith automatic boiler locking2 timers automatic2 speedsFor max. 150 kg flour / max. 240 kg doughTub capacity: 350 litresWith flour dust CoverWith 2 kettles optionally also with several boilers

Rapid mixer,stainless steel,with timer and safety switch,spray function.

Graco Alligator Drum Stirrer, Agitator pneumatic Very good ready-to-use condition, directly from production!

Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Thrust and Shear mixer Mod DT / 350 Viani Complete with sturdy AISI 304 stainless steel frame, electrical panel, Frame for machinery support in square tube 100x100x4, rectangular tube 100x50x4 and flat iron thickness 15 complete with six feet and six anti-vibration with dimensions of mm. 2150x1800hx1250

Device: Double-cone mixer, Producer: COS.MEC ITALY Type: MB250, Year of production: 2001 Total capacity of the tank: 250L Speed control: 5-13 rpm

USED DISPERMIX

BETOMIX PADDLE MIXER Concrete/BETON Mixer. Two Engines Two Gearboxes

Fork kneader/mixer with cast iron bottom 120cm capacity 50kg. Revised in 2022. Fully functional. Standard safety circuit.

Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

ROTARY VACUUM MASSAGER-DEFROSTER, ELDON Technical description: Power supply: 380-440V/50-60 Hz Dimensions: 1700 x 1250 mm

Explosion-proof Turboplaner 600 (Zanelli s.r.l. brand). Year: 1995 - tank 600 liters - rated power 33Kw - notched impeller type. Price negotiable

Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request

Stock # U2436 Used stainless steel lab size double cone powder mixer by ACH-MECH (PL). Total volume of mixing chamber 25 l. Working volume about 12-15 l, with maximal weight of batch up to 16 kg. Contact parts designed in stainless steel AISI 316L. Feeding inlet has diameter 200 mm and is closed with stainless steel lid. Discharge outlet has diameter 80 mm and has manually operated buttlerfly valve. Distance from discharge outlet to bottom support plate 730 mm. Mixer has also manually rised, plexiglass cover, equipped with safety switch. Machine is driven by el motor 1.1 kW, 1415 rpm, 230 /400 V , 50 hz. Working rotation adjustable in range from 4-18 rpm. Machine has local control panel, and is mounted on mobile pedestal, designed in stainless steel AISI 304. Includes technical documentation and CE certificate.

Homogenizer Tetra Pak Description Homogenizer Tetra-Pak Production 27.000 l/h available documentation and CE mark. Features Model: SHL 40 A 200 BAR Year: 1995 Weight: 6.000 Kg Width: 1´75 M Height: 2´20 M Large: 2´40 M

Wolfking 600L TSM Twin shaft paddle mixer Stainless paddle mixer with continuous ribbon, 600L capacity, pneumatic side doors open to discharge product, 3Ph

Completely renovated lift With new axle and bushings New electrical connection New packing box for gearbox 2 speeds Approx: 40 amps

Mondomix A-05 Lab size mixer aerator Stainless lab size mixer with tank, pump and cooler all mounted on stainless mobile frame

Herbort 159D Homogeniser Stainless homogeniser, 150l stainless hopper, 3Ph

Homogenizer Manufacturer Pro C Ept Model 4M8 Made in 2006.

Used carbon steel 100 litre (26 gallon) capacity sigma blade double arm mixer made by Nagema (Germany) type DMK100. Stainless steel vessel inside measures 600mm long X 500mm wide X 400mm deep. Carbon steel blades are driven through gear box and belts with pulley by EL. motor 3PH/400V/50HZ/7,5kW. Tilt type of discharge. Control panel is included. Transport dimension: 2400 X 1150mm, high: 1600mm

Ferrari dispersion mixer from 2010 These were purchased but never installed/used . Some dust to remove only. Available: 2x 7.5kw variable speed dispersion mixer 4x 500L mixing tanks Brand: Ferrari Power: 7.5kw Speed: variable