mixer kneter used for sale

Turbomixer: 200 litres, make: Henschel, model: FM200A, stainless steel, engine: 37/43 Kw 2-speed 1500/3000 rpm. Electrical panel.

Turbulent mixer / paddle dryer Manufacturer : Drais Volume : 2500 ltr. Material : wetted areas in stainless steel Drive : 57 / 40 KW Operating pressure : 5 bar Electr. Power supply : 380 V / 50 Hz; --> Machine with extendable mixing unit.

Volume : 2200 ltr. Material : Mild steel --> Batch mixer, mixer shaft speed : 120 rpm

Several used ARI 3 – way control valve with Belimo servomotor 24V DN 80 / PN 6

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Low & Duff (Ladco) Macintyre Type : PG 50_Pre-Blend / Pre-Mix Refiner System Batch : 5000kg Year of made : 2004 Electrical : 400V 50 Hz, 3Ph Enginepower : 30 kW Maindrive engine different : Chocolate Pump : on Top is installed a Mixer with small 2-Roll Refining Unit with re-circulation Pre-Refine the mass prior then to transfer to bulk chocolate refining/conching, to create a cleaner environment, and reducing time & costs to produce high quality chocolate.

Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...

capacity: 30,000 ltr./h 3 component mixer with Bran + Lübbe fine dosing pump

Batch intensive mixer with a maximum batch capacity of 1,250 l. / 3,600 kg, equipped with: Drum drive 22.0 kW (drum speed: 8.4 rpm), mixing star drives 2 x 22.0 kW (mixing star speed: 39 rpm), hydraulics power pack for discharge gate 3.0 kW, lubrication pumps 2 x 0.18 kW. Previous use: Production of ready-mixed concrete.

REGO-Schläger. Nach einer Generalsanierung - voll funktionsfähig. Wir können den Film in privaten Nachrichten verschicken. Bitte kontaktieren Sie mich, wenn Sie interessiert sind.

Type: S 130 l Complete stainless steel Hopper capacity 130 liter Single working shaft with paddles Rotation of shaft in both directions Automatic stopping when cover is open Electric power: 2.2 kW Voltage: 380 V / 50 Hz Installation dimensions of the machine in cm: Width: 100 Length: 60 Height: 100 Delivery time: after advanced payment, one working day

Tweedy 10 high speed mixer Serial: B1102 10Kg high speed bakery mixer, manual tilt discharge,

Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Emulsion mixer Volume : 500 ltr. Material : areas in contact with the product in stainless steel;

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 559 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Drum size: 1300 x 2450 mm Dimensions: 3200 x 1500 x 1950 mm

ROTARY MASSAGER INJECT STAR, MODEL: HS-7 Technical description: Bowl size: 650 x 600 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 800 x 1200 mm

DOUBLE SHAFT PADDLE MIXER, PALMIA (1000 LT) Technical description: Capacity: 1000 l Power supply: 380-440 V / 50-60Hz Dimensions: 2500 x 1400 x 1800 mm

Gas mixer from Honeywell for sale, incl. gas test certificate and original packaging.

VACUUM MASSAGER LUTETIA TYPE 1, WITH BUSCH PUMP TYPE:100-136 Technical description: Drum diameter: ?1000 mm Capacity: 500 liter Vacuum: 2 mbar Busch pump type: 100- 136 (Serial number:176722) Pump dimensions: 700 x 400 x 450 mm Machine dimensions: 2400 x 1300 x 1800 mm

Shuffle-mix 250 mixer / aerator 200-103 Stainless mixer, 250L, mobile frame, 3Ph

LUTETIA VACUUM TUMBLER, TYPE: 4 Technical description: SERIAL NUMBER: 16004 Power supply: 400 V, 60 Hz CAPACITY: 1800 liter, WEIGHT: 1400 kg, WITH LUTETIA STEAM GENERATOR: type: 24 kW, serial number: 12773, year of construction: 2014, capacity: 23 liter, DIMENSIONS: 3800 mm x 2000 mm x 2050 mm. (Including Busch vacuum pump on mobile s/s frame, dimensions: 830 mm x 510 mm x 640 mm)

Shuffle-mix 500 mixer / aerator Serial: 500-115 2007, Stainless mixer aerator, 500L, mobile frame, 3Ph

Planetary Mixer Mixer Hobart NCM30 - Planetary mixer Hobart - 30 litres - with 1 boiler - with 1 dough hook - with 1 stirring blade, whisk - with 1 flat stirrer - 380 -415 V - 1.1 kW - 50 Hz

Volume : 60 ltr. Material : areas in contact with the product in stainless steel

Hobart HSM10 planetary mixer Serial: 970197530 Planetary mixer, tabletop, with whisk attachment, variable speed, 1Ph

Hobart HSM40 Planetary mixer Serial: 970169619 Variable speed, 40l capacity, comes with two bowls and the whisk attachment, timer control, 3Ph

- Eirich RV 19 granulation / mixing plant, mixer, feed hopper, riser plate completely refurbished. Incl. -Steel construction - Screw conveyors - Input silo approx. 30 m3 - Steep conveyor

Agitator 0.37 KW 910 rpm and 4-leaf folding stirrer 50 / 150 mm for drums With crossbeam made of aluminum profiles 45 45 800 mm. Electric motor, 3 x 230/400 volts, 0.37 kW, IP55, 6 poles 910 rpm, With motor protection plug and shielded supply cable. Placed at an angle on truss. Stainless steel shaft D20, length 800 mm, diameter 20 mm, material 1.4571. With rigid coupling, bare, material stainless steel 1.4571 Impeller: Four-bladed folding stirrer, diameter 150 mm unfolded, 50 mm folded, for drums, material stainless steel 1.4571

Colloid mill Manufacturer: Probst & Class (PUC) Type: N/120/E No.: 84.025 Power: 6.5 kW very good condition LWH: 700 x 400 x 400 mm

Turbomixer: 1.000 L. Brand: Papenmeier, 2-speed engine: 150/190 Kw. at 1500 and 3000 rpm

Bear AR30 planetary mixer 30Kg stainless bowl, variable speed, stainless mesh guard, with beater, dough hook and whisk attachment, 3Ph

Bear AR40 planetary mixer 40Kg stainless bowl, variable speed, stainless mesh guard, with beater, dough hook and whisk attachment, 3Ph

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Powder dispersing plant (powder mixer) Manafacturer: Frystam Shear Pump: Type: FSPE 3532 D No.: 0574460006 Power: 11-22 kW Centrifugal pump: Type: FZ 20 A Power: 7.5-11 kW complete system on a mobile frame with integrated hopper(diameter: 690 mm); Capacity: approx. 65 l with inlet and outlet with sight glass with control cabinet in EEx protection Condition as good as new, rarely in operation LWH: 1350 x 900 x 1050 mm Weight: approx. 350 kg

Corundum stone mill Manafacturer: Koruma Type: 5-E Item no.: 3046 Year of construction: 1982 Power: 44 kW with screw pump (speed-controlled) overhauled and with new bearings with oulet chute & sight glass with control cabinet mounted on frame LWH: 2000 x 800 x 2000 mm

Processing plant Manafacturer: Koruma Type: Disho V160/300 Filling volume: 300 l Batch volume: 240 l Year of construction: 1983 No.: 3143 Power: 18.5 kW with pneumatic vertical lift with pressure gauge & sight glass LWH: 1600 x 850 x 2200 mm

Processing plant Manafacturer: Koruma (Nameplate missing) Type: Disho V160/400 Filling volume: 400 l Batch volume: 320 l no vacuum no double jacket with control cabinet, recirculation line & three-way valve LWH: 1500 x 1050 x 1550 mm

Laboratory processing plant Manafacturer: Stephan Type: UM-12 (universal machine) No.: 714.381.07 Power: 1.5 kW Year of construction: 1989 with various mixing tools and spare parts LWH: 410 x 400 x 600 mm LWH (housing): 950 x 450 x 360 mm

Processing plant Manafacturer: Fryma Type: Disho VK-300 (Nameplate missing) for cold production, without double jacket new control system, with Siemens touch panel with wiring diagram on request: with vacuum pump good condition LWH: 1650 x 800 x 2500 mm Weight: approx. 800 kg

Jetstream mixer (Nameplate missing) Power: 2.2 kW Diameter: 130 mm Speed: 2870 rpm Powder feed possible LWH: 1300 x 500 x 450 mm

Jetstream Mixer Manufacturer: YTRON Power: 0.45 kW Year of construction: 1998 Diameter: 95 mm Speed: 1430 rpm Powder feed possible LWH: 1100 x 250 x 250 mm

Jetstream Mixer Power: 2.2 kW Diameter: 105 mm Speed: 2810 rpm Powder feed possible LWH: 950 x 250 x 250 mm

Mixer Manufacturer: VEM Gearbox: Stöber speed-controlled LWH: 1200 x 200 x 200 mm

Blade mixer No.: 1914872 Power: 0.25 kW Gearbox: Stöber

Propeller mixer Manafacturer: Lightnin Type: HP-18 ID: W40608 Power: 0.18 kW Gearbox: Brook Crompton Parkinson Motors with claw (for attachment to the vesssel) with start-stop control LWH: 250 x 150 x 950 mm

Dissolver mixer Manufacturer: sem Gearbox: Moteur Asynchronous Power: 0.37 kW with claw Dissolver head diameter: 100 mm LWH: 350 x 350 x 950 mm

Blade mixer Gearbox: Stöber No.: 1914873 LWH: 200 x 150 x 1000 mm

Blade mixer Manufacturer: SEW-EURODRIVE Type: FAF 47 DT7104/1F Power: 0.37 kW Speed: 1380 rpm LWH: 210 x 300 x 1550 mm

Propeller mixer Manufacturer: SCABA Type: 30 VA Power: 0.75 kW in EEx Protection very good condition LWH: 350 x 350 x 2200 mm

Dissolver mixer Manufacturer: Loher GmbH Type: eA132SA-61 Power: 2.6 kW Diameter dissolver disc: 350 mm in EEx Protection Speed: 960 rpm LWH: 400 x 400 x 1700 mm