mixer 1500 used for sale

roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1440/1700/H960 mm -Weight: 265 kg

roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.37 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1440/1700/H960 mm -Weight: 217 kg

roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1700/1440/H750 mm -Weight: 240 kg

roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: kW rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1700/1400/H690 mm -Weight: 210 kg

Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Roller conveyor drive motor: 0.18 kW 88 rpm -Drive motor conveyor belt: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1700/1440/H690 mm -Weight: 348 kg

Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Roller conveyor drive motor: 0.18 kW 88 rpm -Drive motor conveyor belt: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1700/1500/H700 mm -Weight: 397 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle turntable steering -Platform: 3000/1500/H545 mm -Load capacity: 3.5 t -Tires: 75x305/400 -Drawbar: reversible, trailer coupling on both sides -Quantity: 1 piece available -Total dimensions: 4730/1500/H545 mm -Weight: 470 kg

Screw compressor, compressor, compressed air unit, compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Manufacturer: JUBA, compressor with dryer -Compressor: Type JB 1500WX4 -Volume flow: 520 l/min -Engine power: 6 kW -Pressure: 7 bar -Tank capacity: 160 l -Dryer: Type JB-10AC 0.5 kW -Drying capacity 1.5 m³/min -Individual components: see photos -Transport dimensions: 1320/820/H830 mm -Total weight: 180 kg

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: 1500/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 235 mm -Transport dimensions: 1500/950/H1120 mm -Weight: 139 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 7000/1500/H735 mm -Load capacity: 15 t -Tires: Solid rubber dual tires, 4 pieces, 425/150-305, see photos -Overall dimensions: 8570/1500/H735 mm -Transport dimensions: 7000/1500/H735 mm -Weight: 1840 kg

Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 2000 kg -Load cell: 4x Tedea-Huntleigh 500 kg -Dimensions: 1500/600/H80 mm -Weight: 80 kg

table length: 1500 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 t

DURENDUS DPS-200 – Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm The machine shown here has already been built and delivered on behalf of a customer. We can remanufacture this machine for you at very short notice. It is a hydraulic gantry straightening press from the manufacturer DURENDUS with a maximum pressing force of 200 t. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm and a stroke of 400 mm, making it ideal for straightening work, press-fit processes as well as applications in steel construction and toolmaking. Technical data + information: Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm General information Manufacturer: DURENDUS Model No.: DPS-200 Type: Gantry press / H-frame Press force: 200 t (adjustable) Total weight: approx. 8,500 kg Dimensions (W × D × H): approx.  ...

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

Height=1.5 m, Overall length= 0.64 m, Overall width= 1.74 m, Net weight= 273 kg,

turning diameter over bed: 1420 mm turning diameter over slide rest: 1000 mm turning length: 15000 mm turning dia. in gap: 2050 mm spindle diameter: 160 mm speed: 1 - 400 U/min faceplate diameter: mm spindle motor: 30 kW total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate - 4 Steady rest - 4-way toolpost - Rapid traverse - tailstock - Taper turning attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

180 Degree Belt Curve Conveyor, Transnorm, TS 1500 -100 – used - Price ex location: only 2.500.-€ (net) dismantled, packed and loaded! Manufacturer: Transnorm Type: TS 1500 -100 Year of Make: 1997 Nominal width: 700mm Inner radius 500mm Conveyor winch: 180 degrees Belt Type: KT 94 Dimensions: Incl. feet For further dimensions see sketch (measured without the engine) Condition: good Available: immediately Location: Frankenberg warehouse site

Key data: 650 mm, 1500 mm

Double Spindle 5-Axis/7-Axis CNC Double Spindle Turning and Milling Center Okuma Multus U3000 1SW 1500 Year of construction 2021 OSP P300SA IGF-D CNC Controller Circumferential diameter over carriage 650 mm Turning diameter max. 1,500 mm Main spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Sub-spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Tool support: Single tool carrier in the work area Tools for turning (L) and milling (M) CAPTO C6 Tool Holder Milling spindle drive power 19/25 kW Milling spindle speeds 50 – 12,000 rpm. Tool magazine and automatic tool changer 80 tool magazine positions Axes/travels: Flat path X 645 mm Perpendicular travel (off-center) 250 mm Longitudinal travel Z 1,600 m ...

: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 € : 504.24 € : 1 : 40 to : 1500 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2000 mm : 950 mm : 1900 mm : 1800 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure power: 10 bar Pressure power: 1.120 l/min. output: 7,5 kw Piston compressor system Renner type RIK 500/1500 incl. additional boiler and accessories for generating compressed air for small to medium-sized operations. Including dismantling and loading. Fixed loading date: 15.06.2026. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1193 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1500 , , https://www.hamofa.com/catalog/product/view/id/281969, , = More information =, , Empty weight: 240.000 kg, Type number: KTTA50-G GENERATOR 1500KVA

General SKU034C093 LocationBarneveld MakeSuperior B.V. Beusichem TypeZM-1500/750/4 No.5483 Main Features MaterialStainless steel Surface1.1 m2 Size length1500 mm Sizes width750 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface1,1 m² Number of sieve decks:3 Sieve sizes1500 x 750mm With covercheck InletDia: 200mm OutletDia: 100 mm (4x) Drive excentercheck Motor2x 1,3 kW, 220/380 Volt MaterialStainless steel 1.4301 (304) Information Year of construction1986 Mounted on stainl. st. framecheck Floor space2,4 x 1,2 m Total height1,7 m Weight650 kg Extra Specificationssieve decks are not included Feed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicPlastic & polymersRubberOther chemicalStarchGeneric medicinesPowdered foodsConsumer wasteVibro sievesSuperi ...

General SKU079G384 MakeItalvacuum Borgaro Torino TypeCriox RB-1500 No.3336 Year of construction1996 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume1500 Ltr. Specified Features - Tumbler dryer Double cone tumbler dryer(1x) Capacity1500 Ltr, Useful capacity 600 Ltr Inlet/man hole dia. 450mm Outletdia. 350mm With jacketcheck Max. temperature95 Degr. C. Motor1,5 KW, 230/400 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information Floorspace4,0x2,3 M Total height2,4 M Weight4000 KG ATEX compatiblecheck Extra Specifications- Cone equipped with 2 flanges which can be used to install choppers DiscountTumbler dryersItalvacuumDiscountDryers > Tumbler dryersBrand > Italvacuum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

Machine name: Sludge Dewatering Centrifuge used Manufacturer: Huber Type: RoD 1500 Year of Make: 2005 Drive motor: 18.5 kW Throughput m³/h: 12 m3/h Permissible. Sediment density: 1.2 kg/dm³ Max. drum speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless Steel Dimensions: L 2800 x W 1000 x H 1100 mm Curb weight: 3000 kg Tech. Documentation: Yes Remark: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulic B/C 7,5 -16 Z HP Accessories: Control cabinet and hydraulic system Condition: Used Price: On request

This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details.

CONTROLS   PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 1500 mm TRANSPORTATION BELT   speed min.: 0.3 m/min   speed max.: 5 m/min ELECTRICAL SPECIFICATIONS   mains power supply: 28 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 4000 kg

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Recommended as a line with PT 8, TCAP 47, Packer TCBP 70. Originally developed for 1.5 liters, this machine with this volume produces 6000 packs per hour. The V100 development stage and the special feature of the final sealer system, which requires one star, make the machine special. Smooth running and durability with consistent quality are the hallmarks of every TBA 8. After the extensive service check in our workshop, we pay particular attention to the correct settings of the system for reuse. It is particularly important to us to adjust mechanical and electronic systems flawlessly in order to avoid later malfunctions. The pneumatics and hydraulics of the system must be carefully checked and maintained. Many of our customers have already been able to convince themselves of this during the work. Even after many years, these systems are ready for further use after our overhaul. A cost-ef ...

Transnorm conveyor belt GF 1500-600-500 RA2070 Technical data: Conveyor length (NL): 1500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit  ...

Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 15000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Consisting of a TBA 8 V100 LSC 1500 ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 LSC 1000ml filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Screw Cap TCAP 47 and a Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

: neu : ca. 4 Monate ab Auftragse : 1530 mm : 16 mm : 12 mm : 7 1/min : 3 ° : 8 : 500 mm : 22.5 kW : 250 l : 950 mm : 2350 mm : 1400 mm : 2000 mm : 5200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:670 mm turning length:1540 mm control:F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover:700 mm Travel turret No.1 (milling spindle) x/y/z:495 / ± 150 / 1562(+164) mm Rotation B-axis:-30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/40 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:20,2/18,8 kW Torque of milling spindle:120 / 44 Nm tool taper milling spindle:Coromant Capto C6 Tool magazine for milling spindle (turret 1):76 Tool change time tool/tool, milling spindle:1,25 s Spindle 1 RPM:3000 1/min Spindle 1 Power:36 / 30 / 25 kW C-axis spindle 1:0,001 ° Bar capacity spindle 1:102 mm Spindle 2 RPM:4000 1/min Spindle 2 power:26 / 22 / 15 kW C-axis spindle 2:0,001 ° Bar capacity spindle 2:80 mm dimensions of the machine ca.:7,8 x 3,6 x 2,9 m Linear scales on axis:X, Y programmable steady:KLU-A530 & SLU-X3.2 Spindle 1 ...

turning diameter over bed:2600 mm turning diameter over slide rest:2200 mm turning length:5000 mm faceplate:2050 mm number of spindle speeds:0,7 - 70 rpm total power requirement:ca. 22 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm

stations:24 weight of the machine ca.:3,5 t ·Precise serial production of part families and demanding workpieces ·Table index repeatability of ± 2.5 µm ·24 stations with up to 44 machining units for very high output rates ·Ideal for high volume production with fast cycle times

turning diameter:500 mm turning length:1500 mm Technical Specifications: ·Turning diameter over cross slide: 290 mm ·Spindle bore: 71 mm ·Speed range: 3?2,800 rpm ·Rapid traverse speed: 10 / 5 m/min ·Feed rate: 1?2,000 mm/min ·Total power requirement: 22 kW ·Machine weight: approx. 3.2 t ·Space requirement: approx. 3.0 × 1.6 × 2.0 m

turning diameter:500 mm turning length:1500 mm turning diameter over bed slide:290 spindle bore:71 mm turning speed range:3 - 2800 U/min rapid speed:10 / 5 m/min feed speeds:1 - 2000 mm/min total power requirement:22 kW weight of the machine ca.:3,2 t dimensions of the machine ca.:3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment

CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...

: neu : ca. 4 Monate ab Auftragse : 1530 mm : 12 mm : 9 mm : 8 1/min : 3 ° : 8 : 500 mm : 15 kW : 180 l : 950 mm : 2200 mm : 1200 mm : 1800 mm : 3400 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt spiral mixer for powder and granules with hydraulic mast - 950mm diameter - Pneumatic outlet flap - approx. 120 litres filling volume - made of stainless steel - Drive power: 2.2 kW - 52 shaft revolutions per minute - Adjustable shaft speed - With hydraulic mast (0.55 kW)

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

FOR SALE .. WESTFALIA GEA BILGE MASTER 1500 COMPLATE SYSTEM YOB 2007 AT TURKEY ... HAVE A GDY SIR; WE VE COMPLETE SYSTEM WESTFALIA GEA BILGE MASTER 1500 AT STOCK. PLS FIND DETAILS OF SYSTEM. — BILGE MASTER 1500 YOB 2007 SER NO 9017-909 IMO CERTIFICATE 330 238 / MEPC 107 (49) — BILGE WATER CENTRIFUGE GEA WSD8 01 037 YOB 2007 S No 9039 654 —OIL MONITOR OMD 2005 —COMPLETE WESTFALIA CONTROL PANEL --GEA FILTER AF 300 YOB 2006 -- FEED PUMP IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Storage Tanks / Pressure Tanks / Beer Tanks in V2A with cooling jacket Test pressure: 2,86 bar, Operating pressure: 2 bar Volume: 1500 Litres -NEW- Measurment and Weight: Total Height: 2609 mm Cyl. Height: 1500 mm Diameter: 1100 mm Weight: 290 kg Material: V2A (AISI 304) 1.4301 Upper bottom: • with manhole Ø 400 mm with 4 x screw • with 2 eyelets • with ventilation system DN 50 • with CIP-cleaning • with downward drawn filling pipe DN 32 with fermentation connector with overpressure valve, with manometer (on extra charge) Tank cylinder: • with ladder hook up • with cooling jacket h=1000 mm • with sample valve DN 15 (on extra charge, with spiral in stainless steel also available) • with immersion socket for temperature indicator and temperature indicator (on extra charge) • on the back of the t ...

Surface disinfectant ready-to-use solution (ethanol- / isoporpanol-based) in 5L canisters for surfaces - Eliminates 99.9% of bacteria, fungi, germs and special viruses (H1N1,H5N1, Grippale Infections, Influenza, COVID-19 and Diarrhea) Technical data: Container: 5L canister Pieces: 300 Origin: Germany Smell: alcoholic (without addition of fragrances and dyes) Colour: clear-transparent Density at 20 degrees: 0.90 g/cm3 Water solubility: easily soluble Ph value: 7-8 UN number: UN1993 Active ingredient content per 100g product: 55g ethanol & 16g 2-propanol Registered and approved quality product from Germany. Opinion on the efficacy of the disinfectant in Sars-CoV-2 infections: Based on the VAH publication of 12.03.2020 "Notes on the efficacy and manufacture of disinfectants from 2-propanol and ethanol based on the general decree of BAUA against the background of the ...

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY Machine number: 321637 Year of construction: 2001 Power: 90-1500 l / h Speed: 24-400 rpm. Pressure: 0-16 BAR Motor: 1,5 kW, 400 V North, Connection suction side: DN 70 Port side: DN 70 Length: 1700 mm Condition: used, ready

Simatic S7-1500, inkl. Memory card, 6ES7 515-2UM01-0AB0, Siemens, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Simatic S7-1500, 6ES7 515-2UM01-0AB0, Siemens, - incl. wall bracket - incl. Simatic S7 memory card, 256Mb, 6ES7954-8LL03-0AA0, Siemens, new price € 397 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions  ...

approx. 1500 m2 steel construction stage 1-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

Two (2) Overhauled Solar Mars 100 Version 15000SAN – 10 Mw, 13,800v. 60 Hz (each) ISO - Natural Gas Turbine Generator. DOM – 2011 – warranty expired – sold as is – where is - These two units have been dismantled. SCOPE of SUPPLY: Complete Gas Turbines including: Gas turbine (axial compressor, combustion chamber, and power turbine), Intake volute, inlet silencers, Exhaust volute, exhaust silencers, Lubricating oil system, oil tank, heater, main and auxiliary oil pumps (main mechanical, AC electric pre/post, DC electric backup), filter, 120V DC starter, pressure and temperature regulator, oil mist separator, ventilation flame arrester, Starter motor, Oil pressure regulation system, Thermostat valve, Duplex filter holder with its 6-way valve, CO2 piping system, fire detection, and fire extinguishing system CO2, Instrumentation associated with the turbine (pressure transmitters, ...