mix silo used for sale

2 X MIXERS - SOLD AS SEEN

Offer 7 paint mixing buckets mixing tank agitator tank Drais 300 l rollable (for e.g. Drais color mixing unit (dissolver) type RN 218) Fig. 1-7 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories for the Drais-Farbmischwerk type RN 218 (sold). Technical data (partly estimated or from reference plants): Manufacturer: Drais Designation: Paint mixing bucket Mixing tank Agitator tank Year of construction: probably 1985 Material: sheet steel Inner diameter: 80 cm Height: 80 cm (overall) Weight: approx. 130 kg Quantity: 7 pieces with paint residues. Also available in parts for 290€/piece. further assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h The centrifuge was part of a wallpaper production plant. After cleaning the tools, it is used to separate the plastisol from the  ...

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Machine name: Vertical Heating Cooling Mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year of construction: 2005 Speed: 104 / 300-1500 rpm Operating hours: Very few operating hours Material: Stainless steel Drive motor: 11 / 45 kW Design: ATEX version / explosion-proof Total capacity: Heating mixer: 210 liters / Cooling mixer: 391 liters Wetted parts: 1.4541 Gearbox: bevel gear motor / motor frequency-controlled Dimensions: L 4605 x W 4225 x H 3550 mm Tech. Documentation: Yes Note: Technikum Betrieb. Wood chips / melanin resin additives Accessories: Stage with stairs, temperature control unit 30 kW, platform scale, control panel, control cabinet, dust filter

Qty 1 x Guix 75 internal mixer, Chamber volume 75L, Tangential rotors, Hydraulic drop door with linear actuator and latch, Motorised lubrication and process oil system, With 250kw A.C. 1470rpm, 400V motor and controls. Rotor speed approx 60rpm. All mounted on a heavy duty steel base. Complete and in very good condition. 

Used spiral dough mixer KEMPER, Type: SPL 75 -fully reconditioned- - for 120 kg dough or 75 kg flour - reconditioning in July 2017 - new v-belts, 2 new timers, reconditioned motors - 2 timer clocks - with flour duster cover - spiral and bowl in stainless steel - special ultrasound cleaning for the bowl - condition: technical and optical very good - ready for operation El. connection: 380 V, 50 Hz, 3ph, 2,5 A All spare parts were fully renewed. Mixing arm and middle stick are in a very good condition. The bowl runs quitly. Inspection and test run possible at every time.

Tumbler IGLU 250 in good used and functional condition. Completely made of stainless steel, 250 litre drum, vacuum, rollable, analog control. Dimensions W/D/H 95/150/180 cm. Operating voltage 400 volts. Workshop-tested, ready for immediate use. More on request.

Planetary mixer Varimixer AR40 The AR series of beaters is the oldest by design and also the most durable series of beaters. The AR series is characterised by the fact that it has a mechanical belt transmission with simultaneous infinitely variable speed control.  The well-known robustness and powerful motor have been retained, and a number of characteristic features of the AR models have been improved without compromising the widely recognised quality. Technical data: Capacity: 40 litres, Net weight: 180 kg, Adjustable speed: 53-294 rpm, Dimensions: 570x912x1210 (W X D X H), VL-1 control panel, Stainless steel mixing bowl, Stainless steel butterfly, Electrical power: 400 V - 1.1 kW. After general refurbishment. Call and arrange a demonstration of the machine!

Planetary mixer Varimixer AR10 The AR series of beaters is the oldest by design and also the most durable series of beaters. The AR series is characterised by the fact that it has a mechanical belt transmission with simultaneous infinitely variable speed control.  The well-known robustness and powerful motor have been retained, and a number of characteristic features of the AR models have been improved without compromising the widely recognised quality. Technical data: Capacity: 10 litres, Adjustable speed: 53-294 rpm, Stainless steel mixing bowl, Stainless steel butterfly, Electrical power: 400 V - 0,37 kW. After general refurbishment. Call and arrange a demonstration of the machine!

Inject Star ES-1100 Vacuum Tumbler-Ref.8491D Brand: Inject Star Model: ES1100 Manufacture year: 2005 Volts (v): 3 220 / 380 V / 50 Hz Power : 2,2 kW Width: 1540 mm Height: 1800 mm Length: 2150 mm Weight: 750 Kg This machine is designed for massaging meat with and without bones, using a special baffle. The product is moved across the special baffle to provide efficient protein activation, and massaging in a rotating, sliding, and slipping movement. Drum volume: 1100 l Optimal loading: 500-700 kg Drum rotating speed: 1-11 turnovers per minute The system is driven by a frequency controlled motor via friction rollers. The container is emptied by rotating it to the left. Equipped with computer. Up to 99 production programs can be created and stored. The programmable parameters are: massaging speed, massaging duration, direction of rotation, processing time,  ...

Product number: 1163 Mixer: 2AM1000L-92-08624 Speed: 2 speeds, 20/40RPM Power: 3 x 380V, 50Hz, 13kW Dimensions: 2400 x 1300 x 2950 mm Including lifter for 200L bins Meat pomp: 250-120V1700 Diameter screw: 250 mm Hopper: 1700 litres Dimensions: 1400 x 2500 x 2600 mm Including Baktec-matic water dosing Grinder: 300 mm hole plates Dimensions: 1200 x 800 x 2300 mm

Fluid mixer for tempered mixing with double sheath, 350 l. content (usable volume: 100 l. - 280 l.), outlet sideways, pressure-resistant up to 10 bar, product-contacted parts made of V2A 1.4541; without tools.

Stock# U2403-1 Used stainless steel homogenizing mixer by Brogtec (CH) model MH-8. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor  ...

Fluid mixer for tempered mixing with double jacket, 350 l. capacity (net capacity: 100 l. - 280 l.), lateral oulet, pressure proof up to 10 bar, product touched parts in V2A 1.4541; without mixing tools.

Type Grinders / Mincers Height 1580 Width 980 mm Length 1100 mm Voltage Electrical: 400V 50Hz 3N Installed Power 4 kw Main material Stainlees Steel Time of realisation 2-3 weeks Throat Diameter mm Grinder Type Feeding System Hooper

Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

ROTARY MASSAGER INJECT STAR, MODEL: HS-7 Technical description: Bowl size: 650 x 600 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 800 x 1200 mm

NEW! 400 L capacity all stainless steel with stirring system conical bottom with centrifugal pump with water meter power : 1,5 kW dimensions (l x w x h) : 1.200 x 700 x 1.500 mm

Process tank 450 l · vertical tank · pressure tank up to 2 bar · main tank made of stainless steel AISI 316Ti · tank insulated with mineral wool with a thickness of 50 mm in the cylindrical part and on the bottom end outer jacket made of stainless steel AISI 316Ti, thickness 2mm · bottom and top bottom pressed DIN 28011 · heating jacket for glycol · circulation pump · heating medium temperature sensor · expansion vessel of the heating system electric heaters - 5 pcs. 4.5kW/400V · control box: controlled by the heating system and the operation of the stirrer · heating medium supply connector DN33.7 · connector for receiving the heating medium DN33.7 Equipment: · manhole DN300 (2 bar) with a safety sensor drain connection (heated) filling connector (heated) · filling level sensor connector · PT-100 temperature level connector · safety valve · Redox + e ...

Type: UC 80 for Max: 80kg flour for maximum: 120kg dough

Mixing plant EKATO (for anhydrite screed, milk of lime and other media) Stainless steel mixer in 6 m container. , 80-122 RPM. Control Schoregge GmbH complete Control, balance, etc. Mass of the mixer: diameter: 1, 60 m, height: 0, 80m, volume: 1,600 l

Mixing soft / empty suction valve Input / output diameter: 38mm

Mixing soft / empty suction valve with holder and magnetic valve Diameter input and output: 38 mm

Mixing soft / empty suction valve from aluminium with plexiglass disc Diameter input / output: 38mm

Manufacturer: BARTEC Type: 250 year: 2004

Used dough spiral mixer DIOSNA, Type: SP 120 D -in Bakery condition- - for 120 kg dough or 75 kg flour - mixing arm in stainless steel - bowl in stainless steel - 2 timers - 2 speeds - 1 backward gear - emergency switch off - bowl diameter: 750 mm - dimension: W 800 x D 1.270 x H 1.300 mm - total weight netto: approx. 330 kg - el. connection: 380 V, 50 Hz, 3/N~, 16 A - condition: very good The mixer is checked and testet. It is in a very nice condition and ready for operation. Inspection and test run are possible at every time.

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Manufacturer: Nagema Type: planetary mixer volume: ca. 80 liter dimensions: 1200x800x1800mm electrical: 400 V wight: 574 kg different: electronic speed control 100 .- 400 1/min We offer this machine in as-is where it is condition Stückpreis / price per pice: Euro 2.750,00 Net (excluded Vat), ex Warehouse Hess. Lichtenau, (EXW)unpacked

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Thank you for your interest on our machines, we like this may offer you: Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Keripar Type: Mixer with air supply via built-in air compressor for the aeration of Masses Volume: 40 l dimensions: 600 x 800 x 1050 mm (BxTxH) electrical: 380V different: floor machine with 40 liter stainless steel boiler 2 whisk, sturdy construction Machine is roughly cleaned and checked for function I offer this machine in as-is where it is condition ex warehouse Hess. Lichtenau, unpacked

Batch mixer with quick discharge bomb bay door 15° the length of the drum. Painted mild steel Steel blade (ploughshare) mixing tools Large feed chute with free shaft end without drive unit (suitable for 50-80 rpm with 55-132 kW) 3 inspection openings on the front of the drum Machine will get complete service

new ! all stainless steel 2 speeds (30 and 60 rpm) 2 mixing directions 2,4 kW safety lid CE-approved overall dimensions (l x w x h) : 1.720 x 840 x 1.390 mm (open lid: H: 1.890 mm)

The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

all stainless steel capacity 300 L. (= ± 10CF) Double Ribbon mixing arm Dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved 2 speeds: 16 en 32 rpm 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: herbs, ingredients, powders,…

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...

Volume: 600 ltr. Material: Stainless steel

Volume: 400 ltr. Material: Stainless steel; --> Mixer equipped with a heating jacket.

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 12 kw pneumatic lid inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 2.210 x 1.130 x 1.770 mm (open lid : ± 2.630 mm) infeed height : ± 1.600 mm outfeed height : ± 720 + 20 mm + Loader for eurobins

Used Zanelli paddle mixer total volume 1700 liters. YOM 1993. Engine speed regulated by 6-11 kW inverter. Internal dimensions: diameter 1.2 m, length 1.5 m. Weight about 3000 kg. Made in stainless steel. No technical documentation

Used Loedige laboratory high shear mixer model MGTL 10. Rok budowy 2015. Equipped in interchangeable vessel 10 L volume. Min. batch volume 0,3 L, max. batch volume 0,8 L. Impeller drive 1,1kW (variable speed). Chopper drive 0,4 kW (variable speed. max 6000 rpm). 1 interlocking magnet switch per vessel. Product contact parts: AISI 316 L/ polished Ra < 8?m Outside parts: AISI 304 Seals: silicone, PTFE Filter bag: stainless steel filter cartrige Control cabinet: painted steel housing Dimensions: wxdxh 1000x500x742 mm Weight: approx 150 kg Weight of 10 L vessel: approx. 15kg.

Volume: 5 ltr. Material: Stainless steel Drive: 0.37 KW;

Used Menger / spiral shaft mixer THURINGIA FOOD TECH, type: VM 1000 -Refurbished- - Newly overhauled in 2019 - Equipment also for vacuum with lid - intensive, gentle mixture in a short time - Operation via touch panels (german) - completely made of stainless steel 1.4301 excluding drive elements, seals, controls, etc. - Consisting of stand, mixing trough, drive - Mixing trough is arranged horizontally - the mixing spirals are arranged horizontally against each other, Mixing principle against each other in the interval - Emptying in 200 l wagons according to DIN 9797 - Mixing time infinitely variable via PLC 7 - Interval time infinitely variable via PLC 7 - Speed outer mixing spiral adjustable via PLC 7 - Speed inner mixing spiral adjustable via PLC 7 - Connection: outer spiral 11 kW frequency-controlled, inner spiral 7.5 kW frequency-controlled Specifications: - Hopp ...

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Volume: 600 l NORMAL STEEL Drive: 5.5 kW, with pneumatic complete discharge check valve and 2 mounting Sockets Dimensions: 1,700 X 1.400 X 1.300 mm (L X W X H)

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

Hobart ME800 80L planetary mixer variable speed, stainless bowl with beater and dough hook attachments, 3Ph

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.