134,811 used machines on RESALE, but how to find them? Machine Search
Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
Our product range includes not only new mixer 3-75,000 litre mixing volume, but also machine, which partially or completely be overhauled. In addition we offer transmissions, swing arms, Auger gladly at any time use and Generalüberholten different mixer types (including V-mix, NAUTA - and Vriecomischer) with a comprehensive range of services and spare parts available.
Rühle Tumbler MKR 600, Rühle high-tech polishing machine with vacuum, mixing arm, container size 600 liters, touch PC control, mixing and kneading, stepless arm drive allows up to 25 revolutions per minute, direct cooling by powerful cooling unit, Bayonet arm closure, integrated loading for 200 litres of standard trolley. The machine is available at short notice and can be tested in Koblenz, Rhineland-Palatinate.
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv
The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
1 x Francis Shaw model K2A MK4 Intermix Machine number 11242.8, Year June 1994, NR2 rotors, Working batch volume 27 - 36 litres Drop door with linear actuator, SSA dust seals, Pneumatic hopper, Hansen semi unidrive gearbox, Rating 150kw, 1475/32rpm, With ASEA 152kW, 1510rpm DC variable speed motor and controls.
3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled
Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg
1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.
New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...
1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.
This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request
- MWM Mixture Pipe - Please note! Price per piece! - 12141922 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into our opera ...
- Mixture Pipe Mixture Pipe MWM 12301431 Original - Suitable for several motors - Please note! Price per piece! - 12301431 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting ...
- Mixture pipe MWM 12301623 - Suitable for several motors - Please note! Price per piece! - 12301623 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new t ...
- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ...
Hobart M802 planetary Rührmaschine Machine is running video about test run orderly and quiet, available 4 speeds Automatic boilers raising and lowering Quitschen in the boiler increasing, may replace a belt or bearing Normal signs of wear at the foot of the machine Kneading hooks, beaters and Stainles belong to the machine Machine must be thoroughly cleaned prior to use
- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...
P52 - used approx. 6-10 m³ / 6,000 10,000 litre polyester tank / fibreglass tank, mixing tank, brine tank, aboveground, upright, manufacturer Reich, in good condition. Dimensions: diameter approx. 2.50 m x height 2.50 m Vertically standing polyester tank, mixing tank, with funnel for loading salt or other media, underside completely closed, incl. mixing station. As pictured, could not be examined technically. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de
Gross volume: 300 ltr. Net volume: 220 ltr. 1 x Head Material: mild steel.
Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request
Horizontal Mixer HM 2000 -Max. usable volume: approx. 1400 L -Product features: Pastes and liquids with low viscosity MACHINE DESCRIPTION: -Horizontal cylindrical mixing drum, front side screwed to drum or one side welded -Mixing tools welded to shaft as segment bucket -Bearing of the shaft in flange bearing housings arranged outside the mixer with roller bearings -Shaft sealing by easily replaceable gland packings and air flushing -Feeding via built-in nozzle with flange on fixed part of the lid or via lid opening -Emptying via outlet nozzle on the underside of the mixer, DN 150 -Inspection and cleaning via lid on the top of the mixer -continuous lids almost over the entire length of the mixer -Lid with safety lock -Intrusion protection below the lid with longitudinal bars Materials: -Mixing drum made of stainless steel 1.4306 -Mixer shaft made of stainless steel 1.4 ...
front roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) Unused
Bulk material system for mixing loose flours, powder, ganulate, spices and weighing into smaller batches Manufacturer Daxner GmbH Year of construction 2008 / plant in top condition / in stainless steel The system consists of the following components: 2x Nozzle Filter DFK-14/25/150 2x separation container Dm 1990 mm with vibration floor drain to rotary valve 2x rotary valve type Westinghouse AL 300 3C 2x eddy current screening machine type WM20 with magnetic box for metal separation and 2 sets of screen baskets 4x Horizontal Counterflow Mixer HGM-2000 2x Mixer inlet with folding box 2x Tube screw conveyor RSHN-250 2 x Tubular Auger RSHN-300 2 x Stafsjö Gate Valve (knife gate valve) 4x Transport Dosing Screw, Company Schenck Process GmbH, Type GRMD 42.089.089.0380.44.421.1119 If you want more information, please send us an email to: infobarsso and we will send you all ...
rear roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) unused
Used Ruehle tumbler. Model MKR 600. Last service in 2021. RUEHLE MKR600 The RUEHLE drum tumbler-mixer combines many technical functionalities in the field of plasticizing technology. It is used, among others, in: - massaging - mixing - pickling - dry salting The RUEHLE tumbler model MRK600 is equipped with a highly efficient cooling unit and a very high-performance vacuum pump. In the computer software, we can determine the degree of product cooling. The band available to the user ranges from -15 ° C to + 15 ° C. The mass input determines the vacuum level, which can be changed at any time. The possibilities of plastic processing are just one of the advantages of the machine. It has also been equipped with a mixing function - thanks to which the raw material processing time is shortened to 10 minutes. Despite the typical massaging or mixing functions, the device ...
NFM L200IV 200L universal mixer Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. The ...
REITZ RW40300400 agitator for tank containers 4.0 KW / 300 rpm and inclined blade stirrer Worm gear motor IE3: Three-phase motor Moll 3 x 230/400 Volt, 4.0kW, IP55, n1 = 1440 rpm, n2 = 300 rpm, worm gear, i = 1:5, plug-in shaft as output shaft D = 28 mm. 5 m cable and motor protection plug. Shaft: Precision stainless steel shaft D30, length 2000 mm, diameter 30 mm, Material: stainless steel. With 2 x 1000 mm pitch and additional rigid coupling. Coupling: 2 pieces rigid coupling, 1x 28/30, 1x 30/30 mm, material stainless steel Agitator: 2 pieces of double-bladed oblique blade stirrers, diameter 400 mm, material stainless steel 1.4571, welded version. Truss: With 1 piece mounting frame approx. 400 mm x 2600 mm Each longitudinal strut 2600 mm consists of 2 mounting rails 41 x 82 mm profile. With diagonal struts and angles for fixation on tank frames. Frequenc ...
Tonelli 600 stainless bowls stainless bowls for Tonelli 600 model mixer … 28 in stock
Stock #U2450-1 Used foaming mixer by Kinematica AG (CH) type MEGATRON FM 19-120/2 LR-P. Machine has working output in range from 40-200 l/h, depending on product. Maximal viscosity of product up to 10000 mPas. Foaming head is equipped with heating/cooling jacket and can work at pressure up to 23 bar and temperature up to 90C. Rotor works with adjustable rotation - in range from 375 up to 750 rpm. Main drive power consumption - 11 kW. Contact parts with product designed in stainless steel AISI 316L. Mixer is equipped with integrated lobe pump by Tri-Clover/Tri-Clamp, driven by el. motor with power 0.75 kW. Working pressure up to 23 bar. Maximal rotation of lobes - up to 370 rpm. Gase feeding system - dosing air/N2 - at pressure up to 25 bar, temperature up 20C, flow range - 0.5 to 15 ln/min. Machine is mounted on mobile stainless steel frame with local control panel. Last time used in fo ...
Spiralkneter KEMPER, type: ECO 125 AE - for approx. 200 kg dough, 125 kg of flour - machine in the bakery - year of manufacture: 10/99 - State: goods - incl. 2 piece stainless steel boiler -El. Supply: 400 V, 50 Hz, 3Ph, 50 A Inspection and test run are possible by arrangement like.
Volume: 5 ltr. Material: Stainless steel Drive: 2.7 KW Weight: 200 kg
Stock# U2453 Used stainless steel contact parts ribbon mixer by Yanagiya (JP). Mixing chamber has internal dimensions: L 598 mm x W 500 mm x D 550 mm. Total volume of mixing chamber 145 l. Working volume approx 100 l. Side walls have welded atmospheric stainless steel jacket, which has bottom discharge outlet with valve. Mixer has mixing shaft with bolted stainless steel ribbon, belt driven by el motor 1.5 kW, 1420 rpm, 380 V, 50 Hz. Discharge of chamber by tilt, via manually operated wheel. Mixer is mounted on mobile carbon steel base and is equipped with local control panel. Shipping dimensions: L 145 cm x W 95 cm x H 160 cm x weight about 800 kg.
Grieser VPL 3,0 L laboratory vacuum planetary mixer suitable for mixing powdery solids, liquids and pastes as well as for the incorporation of fillers, jacketed for heating/cooling, total volume mixing container 3.0 liters, useful volume mixing container 0.3 to 2.1 liters, operating pressure mixing container -1/+1.3 bar, operating pressure jacket max. 3 bar, flow temperature 100ºC, mixing container can be raised and lowered, speed mixing tool 18-393 RPM, speed planet/scrapper 13-176 RPM, material of product contacting parts 1.4404, material dynamic seals PTFE, material static seals EPDM/Silikon, electrics 400V AC/50Hz, total power 3 kW, Siemens SIMATIC S7-1500, machine weight (without container) approx. 300 kg, includes Single Temperiertechnik type CH-6-6-W heating/cooling system (temperature of the circulating medium (water) 0-90ºC, max. operating pressure 17 bar, test pressure 21 bar ...
Drive: 300 KW Capacity: 90 ltr. Weight: 11500 kg Volume: 63 ltr. Blade speeds: 45.5 / 41.2 1/min. Engine speed: 1500 1 / min. specific stamp: 1-7 bar, adjustable Cylinder high-pressure: 420 mm Air consumption: 140 m³/h (at 3bar; 15-20 ° C) Type of current: Main drive 380 V / 50 Hz Secondary drives 380 /220 V / 50 Hz Voltage 220 V / 50 Hz Weight of the transmission: approx. 2950 kg. -> Hydraulic push-in device.
Machine Type: Core Sand Mixer Manufacturer: Baumberg Type: AMF60 Year of Make: 2010 Condition: used / in working order Offer will only be sent if a complete imprint is provided Price 1.750 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference M-BAU-0425 DESCRIPTION We offer you a used core sand mixer from the manufacturer Baumberg. Weight 480kg Flow rate 1.44 m3/h Timer would have to be renewed. But it also works that way. Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
55,000 litre milk tank/ agitator tank made of V2A Cat No.: 25-0151EUBA Condition: Used Volume 55000 L Material V2A (AISI 304) 1.4301 Overall height 8400 mm Cylinder height 6000 mm Diameter 3400 mm Number of feet 3 Surface marbled on the outside Surface inside 2B=IIIC ground Agitator Erwin Stelzer Warburg Agitator Technology Topsoil: Clapper bottom Level measurement with sleeve 3/4" Side stick agitator mixer with 2 propeller stages Dome with manhole Ø DN 300 Tank cylinder: Manhole Subsoil: Clapper bottom Sensor for level measurement 3 half-shell feet with base plate Fixed Technical data stick mixer: Manufacturer: Erwin Stelzer Warburg Rührwerktechnik Engine type: DRK 7.127 6.0 kW 8.0 hp 390/660 volts 18.2/10.5 Amp. 0.68cosφ 450 r.p.m. 50 Per. Operating Mode: S1 Agitator shaft: 6,870 Propeller: 2 x 500
Used spiral mixer DIOSNA, type: SP 160 D - In repainted the bakery State - 2 time watches - new dust cover - Bowl for 160 kg dough or flour-100 kg - spiral stainless - stainless steel boiler - - 2 speeds - 1 reverse - emergency off switch of the mixer is in good condition and is ready for use immediately. Inspection and testing according to arrangement.
maximum number of results exceeded
please refine your search
