mix plant used for sale

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

General SKU226Y116 LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1200 Ltr. Motor35 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity400 l. (580 l.) Vessel sizesø 880 x 1320 mm Dished bottomcheck Dished top sidecheck With jacket45 l. Max. temperature140 °C, Jacket: 180 °C With paddle stirrerHydrolysis stirrer Motor4 kW Speed mixing shaft7—84 rpm With homogeniserConti-TDS Motor22 kW, 300—3600 rpm MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) With jacketcheck General MakeYstral SerialY-PS 638134 TypeYstral Process System Year of construction2009 With switchgear(as is) Floorspace5,40 x 5,00 m Total height3,60 m Weight7000 kg Extra Spe ...

General SKU226Y118 LocationBarneveld Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General MakeGEA Wiegand Serial354320.90-1 Year of construction2015 Floor space3,19 x 1,27 m Total height1,92 m Weight800 Extra information Main components — One sanitary process/buffer tank (524 L, unpressurized, closed design, with cooling jacket, spray ball for CIP, DN200 hand-hole), with magnetic stirrer, 0,55kW, 400V, 369rpm — One closed-loop RO membrane unit, product-contact parts in stainless 1.4404 — Feed pump, 200 µm edge-gap strainer, tube-bundle heat exchanger (loop cooler), one 3838 membrane housing, control and sampling valves, safety/relief valve Flow rates — Feed pump (41P01): max 1,200 L/h (~1.2 m³/h at 55 bar) — Loop pump (01P01): max 15,000 L/h Pressure / te ...

Manufacturer: Scheugenpflug Type of machine: Casting and potting plant line Year of manufacture: Individual components dated 2022 and 2023. Operating history: The system was in operation from approximately August 2022 until the end of 2023 and ran without problems until the line was shut down The line is composed of the following main components. 1. Potting cell with axle system - Type: CNCell - Built in 2022 - Air pressure: 6 bar - Power supply: 400V 3~/N/PE. - Power frequency: 50/60 Hz - Power input: 8.6 kVA - Rated current: 13.8 A - Control voltage: 24 V DC 2. PTS preheating oven - two lanes - Type: FC Curing Oven FC-5Z-57-P-2S-6050-100 - Year of construction: 2022. - Nominal temperature: 100 degrees Celsius - Throughput time can be individually adjusted. 3. Barrel stirring station - Type: Barrel Agitator Station - Built in 2023 - Weight: 800 kg - Air pressure: 6 bar - Power ...

NANOFILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION, WHEY CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

General SKU271Y422 LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4404 (316L) General MakeChrist SerialCWD 73530A TypeUltrastil TW-UF 1005 Osmotron 1000 soft Select Loopo 100 Year of construction2008 Mounted on wheelsOn skid Floor space4,00 x 1,40 m Total height2,60 m Weight2200 kg Extra information Cap. 1000 l/h @ 20°C,  with 2x BBK (volume 140 l) MBS ultra filter (volume 16,76 l) 4x horizontal tube filtration, Inge ultrafilter 4x, Grundfos pumps Bewades UV-unit Siemens touchscreen control (3-doors control cabinet) BWT, test unit, type Testomat 2000, Christ stainless steel water tank, volume 3000 l, PP water filter tank and salt tank Cap. 1.000 Ltr/Hr Fine chemicalsOther chemicalSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoBeveragesMiscellaneous filtersA ...

General SKU330W713 LocationBarneveld MakeDiosna Main Features MaterialStainless steel Volume600 Ltr. Motor38 KW Specified Features - Universal mixer Universal mixercheck Capacity600 L Vessel sizesdia. 1200x750mm With covercheck Inletdia. 125mm Pneumatic operated outletcheck Outletcheck With motor38 kW 400 volt (Ex) Rotor speed60/120 rpm With lump breakercheck With motor7.5 / 9 kW 380 volt Rotor speed1500/3000 rpm MaterialStainless steel 1.4552 General TypeP-600 Mach.No.238-027 Year of construction1993 Mounted on framecheck With switchgear(as is) Floorspace2x1 m Total height1.45 m Weight2650 kgPowdered foodsGeneric medicinesCatalysts & fillersUniversal mixersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicPaints & coatingsDiosnaIndustries > Food & Feed > Pow ...

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified

- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

CAP.: 10 000 L/H

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 (Mix) Plate size: 1200 x 1200 mm Membrane plates: 54 pieces Chamber plates: 55 pieces Membrane pressure: 15 mm Filter pressure: 10 bar Closing pressure: min. 350 bar, max. 380 bar Total filter area: 242 m2 Cake volume totalling: 4320 litres Number of filter presses: 2 pieces

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

1 x Buzuluk 240 litre Internal mixer Model: 14630, year: Dec 2008 (body and hopper), Batch size: 200 kgs, Drilled sides, Self sealing type dust seals, Oil injection, Hydraulic drop door with linear actuator and toggle latch, Stellite faced drop door, Two wing tangential rotors. 20in pneumatic hopper. 3 zone TCU Full unidrive gearbox (Make Skoda), with 630kW, 6000V, 739rpm, 73.5A slip ring motor and Oil filled starter. In very good condition.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

New machine Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)

1 piece NAUTA mixer MBX 28-R -Volume ca. 2.300 litres - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.37 of kW Virgin

1 piece NAUTA mixer MBX 40-R -Volume approx. 3.200 litre - bulk density CA. 0, 7 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

1 piece NAUTA mixer MBX 50-R -Volume approx. 4.000 litre - bulk density CA. 0, 6 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

Mixer for gentle mixing of temperature-sensitive masses with resins, waxes, etc., incl. control cabinet and AZO weighing scale (1,500 l., on 3 measuring cans), without mixing container. Product-contacted parts made of stainless steel.

Holy V-mix, Nautamix, Vrieco-, NAUTA mixer, cone mixing N.M. Holy b.v. V-mix 25,000 PLR New machine of the mixer is on your products (E.g., particle size, bulk density) and environment (E.g. ATEX zoning) adapted. -Capacity: 25,000 litres water filling -Usable volume: approx. 22,500 litres depending on the product properties -Container, lid, swing arm, mixing screw, spout housing made of V2A -Traverse normal steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified

This mixer is used but has been cleaned and tested This HL662-1STD is ideal for commercial kitchens thanks to its 60 qt. bowl, stainless steel bowl guard, and dough hook. With an ergonomic design and superior functionality, you can make repeat recipes consistently and create new ones with ease and efficiency. This unit requires a 200/240V electrical connection for operation. Ergonomic Swing-Out Bowl Featuring an ergonomic swing-out bowl, this mixer makes it easy to load and unload ingredients. With a single point bowl installation, you can easy mount or remove the bowl as needed. Plus, the bowl interlock ensures that the mixer bowl is properly in place before the mixer will operate for added safety. Dough Hook This mixer comes with a (1) "ED" dough hook so you can mix up to 90 lb. of dough at once. The 2.7hp motor, gear transmission, and safety mechanism system provide plenty  ...

Newmix Atmi life sciences Double jacketed paddle mixer Serial: 15883-005 2011, Stainless pharmaceutical mixer with 500L double jacketed mobile holding vessel, touch screen controls, Min - Max temp 0-90' degrees, jacket volume 6L, 1Ph

Material : Stainless steel Dimensions: L 4.40 m x W 3.50 m x H 5.00 m --> Complete mixing tower in stainless steel version: --> with plough charmer : Manufacturer: MINOX Type: PSM 2000 / 3 MK Volume: 2000 ltr. Material : Stainless steel 3 x knife heads Main drive: 37 KW.

Mixer meat 70 liter, NEW Capacity: 35kg Dimensions: 78x61x74cm Power: 2.2kW

Meat mixer Sind 120 liter, NEW Dimensions: 860x510x1100 cm Power: 1,5 KW

Almost unused 6-ribbon industrial mixer made by MLYNPOL, model MP-3000 . Designed for food and industrial applications. Key technical specifications: · Capacity: 3,000 L · Main motor: 22 kW · Mixing time: 4–5 minutes · Discharge time: 30–60 seconds · Discharge accuracy: 99.5% · Grinder speed: 920 RPM · Operating temperature: –5°C to +45°C · Dimensions: 5,100 × 1,340 × 1,950 mm (L × W × H) Features and Equipment: · Main agitator + 2 high-speed side grinders · Top loading, central bottom discharge · Frequency converter and electrically controlled discharge gate · Robust construction ensuring a long service life Applications: The mixer is ideally suited for mixing, among other things, sugar, starch, coffee, salt, powdered concentrates, powdered sugar, tea, grains, dried fruit, powdered milk, chemical and pharmaceutical powders, and ...

Unused carbon steel double ribbon mixer, 5500 L volume. Chamber dimensions: 4000x1600x1000 mm. Working volume 2500-3000 L. 3 triggers closed pneumatically or manually (pneumatic elements not fitted) 70 mm shaft. Engines used 9 and 11 kW. New gears. Rotation speed approx. 30x / min.

Double shaft paddle mixer, volume: 850 liter, dimensions: 1300 mm x 2300 mm x 1550 mm.

Mobile ring trough mixer with 2 exchangeable mixing blades and 1 exchangeable side scraper for mixing smaller quantities of concrete.

It is a new V MIX 100 planetary stirring machine (max. 100 liters) for sale. specifications: - Continuous speed change - inverter control - Programming 20 mix recipes - Programming the mixing time - Automatic lifting of the bowl - incl. 3 x tools - incl. 1 x boiler (100 liters) - 12-month warranty A video can be sent on request. Price on request.

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery

ALL STAINLESS STEEL Hopper capacity : 300 l Two levels of hopper Two working shafts with paddles Front discharge of ready product in 200 l trolley Programming controller Power – 4 kW Machine dimensions in cm: Width: 95,0 Length: 154,0 Height: 156,0 Weight - 500 kg OPTION :Loading unit 200l trolleys: Column loader dimensions in cm: Width: 110,0 Length: 120,0 Height: 238,0 Column loader power 0,8 kW

Type: S 300 l 2P-V Complete stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 4.4 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of machine in cm: Width: 135 Lenght: 84 Height: 142 Delivery time: after advanced payment, one working day

Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Height: 142 Delivery time: after advanced payment, one working day

Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Lenght: 65 Height: 100 Delivery time: after advanced payment, one working day

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

Debotec A-50 mixer Serial: 1215 Stainless 50Kg mixer, tipping bowl to discharge,

Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg

Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...