128,422 used machines on RESALE, but how to find them? Machine Search
ABB Robot IRB6650 Foundry 200/2.75 S4C+ M2000 , Profibus Control: S4C+ M2000 Number of axes: 6 Max. load capacity: 200 kg Max. working range: 2750 mm Year of Make: 2003 : Robot,Control Scope of Delivery,Cables,Teachpanel,Circuit Diagrams Floppy disk drive for data backup. 2 weeks commissioning warranty. No further warranty In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Further questions will be answered by e-mail or phone. The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT.
ABB Robotics IRB 6400R 2.5-150 M99 complete robot ,Profibus Control: S4C M99 Number of axes: 6 Max. load capacity: 150 kg max. working range: approx. 2500 mm Year of construction 2002 Scope of delivery: robot,control,cable,teachpanel,operating instructions,circuit diagrams 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works. Further questions will be answered by e-mail or phone.
Incineration plant for solvents from exhaust air This equipment is connected to a flexographic printing machine and meets the EU standards. Number of reactors = 3 Exhaust air volume maximum 7500 m3/h Exhaust air volume minimum 1750 m3/h The plant's burner was renewed in 2023
A deposit of €3000.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveill ...
Aluminium lifting frame, winch, auger Auction-ID: A1-40137-183
Injector Brand: Setter (Santonja), 2 stations, hydraulic, 2 engines: 7.5 KW (10 HP) each. Total: 15 KW (20 hp) Direct injection to the cut for footwear.
Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor
Key data: 2000 , 678 , 60
Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way
Key data: 3500 , 1212 , 70
Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:
Auction-ID: A1-46501-2068
For sale is a radiator module from JCB with intercooler and engine radiator from 2021, the radiator is unused. Condition: as good as new (only test run in the factory) JCB Part Number: 320/04847 Total Part Number: MN422200-03300B Case Part Number: MN122110-6013 Water Chiller Part Number: MN422135-0410 Intercooler Part Number: MN127100-4310 F4KAKT1845 Intercooler also fits John Deere and Yanmar We have other parts from JCB and Mitsubishi available If you have any further questions, please do not hesitate to contact us!
For sale is a functional, well-preserved Krones Linatronic empty bottle inspector. Specifications: Manufacturer: Krones Model: Linatronic Year of Make: 1997 Quantity: 1 pc. Capacity:- Voltage: 230/400 V Frequency: 50 Hz Length: 250cm scaffolding + 70cm overhang towards filler Width: 110cm Height: 280cm Equipment: Formats see pictures
Unaudited Auction-ID: A7-46327-249
Very good condition Auction-ID: A7-46327-29
Robot KUKA KR10 R1100-2 / SEL KRC4 2 pieces available 1x 135 and 1x 82 operating hours Year of construction: 10/2021 Number of axes: 6 Max. load capacity: 6 kg Max. working range: approx. 1100 mm Scope of delivery: robot, controller, cable, teach panel 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be viewed Freely loaded / ex works. Shipping costs abroad on request. Please enter your country, city and zip code.
Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg
FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...
BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...
Very nice and young complete Ammonia Bitzer screw pump system. The pump system exists out of one Bitzer OSNA8571K screw compressor, a 110 kW WEG E-motor, oil separator, Low pressure separator, economizer, air-cooled oil cooler, air-cooled condenser and a control panel with Siemens PLC. The Bitzer compressor is driven by a 110 kW Vacon inverter. Capacity is 91kW at 60Hz and -35/+40°C (with 50Hz capacity is 75kW). All documentation is available. Also visit our website: used-refrigeration
Transnorm inclined roller conveyor 2355-980-640 - Showroom machine RA2316 Make: Transnorm Roller width (RB): 640 mm Nominal/outer width (NB): 980 mm Length: 2355 mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Conveyor speed: freely adjustable with frequency converter Incl. supports, curent height 800mm Optionally available: Supports, if deviating from the current ones MFE52 Ethernet frequency inverter control unit Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: Construction year: 2017 condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 2355 Nominal / outside width in mm: 980 Roll width in mm: 640 Roll division in mm: 55 Driven: YES Engine type: 2 ...
ABB Robotics IRB 6600 175/2.8 S4C+M2000 Robot Control: S4C+M2000 Number of axes: 6 Max. load capacity: 175 kg max. working range: 2800 mm Year of Make: 2004 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams Used goods – normal signs of wear present, yet fully functional. More details and pictures on request.
KUKA KR 3 robot Control: KRC3 Number of axes: 6 Max. load capacity: 3 kg Max. intervention: 680 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams.
ABB Robotics IRB 140 S4C+M2000 Robot Control: S4C+ M2000 Number of axes: 6 Max. load capacity: 6 kg Max. working range: 810 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams
Robot Yaskawa Motoman YR-SV3-J30 Control: XRC Year of Make: 2001 Load capacity: 3 kg Reach: 677 mm Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams Used goods – normal signs of wear present, yet fully functional. More details and pictures on request.
Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...
Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...
Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN
closing pressure:6600 kN weight of the machine ca.:45,5 t
I offer here 2 pieces of fine indicator throat gauges from Mahr so-called Marameter F 1 x 25-60 mm 1 x 50 - 100 mm in very good condition immediately ready for use and tested for function the two devices are delivered as shown in the pictures
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
Automatic ingredient dosing and weighing with recipe computer Suitable for dusty, crushed, crystalline, granular products such as salt, sugar, baking aids, spices Dimensions: Length: 3760 mm Width: 750 mm Height: 1880 mm 14 containers with a volume of up to 60 litres Stainless steel Discharge type:Vibro-discharge apparatus 0.085 kW Discharge via: Weighing conveyor belt Dosing accuracy: 10 to 15 grams Dosage quantity/component: up to 10 litres Total dosage: up to 20 litres Discharge capacity: 2 - 10 kg/min (depending on the material)
Beckhoff C6220 Industrial Control Cabinet PC for Heinen( Diana Control) Control Jagenberg Diana Pro. Used, tested.
Key data: 2500 kN, 618 g/PS, 60 mm
Krauss Maffei 250-1400CX Injection Molding Machine with Robot and Gas Boost (225) Item number: 225 Availability: In stock Year of Make: 2016 Brand: KRAUSS MAFFEI Specifications Injection weight: 618 g Injection flow: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Spray pressure: 2005 bar Tiebar spacing: 630x630 mm Clamping plate size: 1135x1180 mm Tool installation height min.: 330 mm Plate spacing max: 1150 mm Control: MC6 Language: German Power: 70 kW Hours: 23170 h Weight: 15000 kg Dimensions: 6.5x2.3x2.3 m Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes Heating Ducts: Yes Gas storage: Yes
SIKO IF09C/1 - 0002 Interface converter for CAN bus, Jagenberg Diana Pro. Used, tested. Gateway modules for connecting SIKO sensors and displays to standardized fieldbus systems. There are three bus connections available. SIKO offers a specific transmitter for each connection. Up to 31 subscribers can be connected to the Profibus or CAN bus via the RS485 interface.
screw size:60 mm closing pressure:3500 kN weight of the machine ca.:25,5 t
Test bench for power up to 2.2 KW Speed control Speed Switching Handheld remote control with cable for speed and rotation direction switching Data for converters see nameplate Connection cable CEE 32A Output CEE 16A Space requirement W - 600 x D - 650 x H - 1,750 mm rollable Weight approx. 85 kg
total power requirement:16,5 kW weight of the machine ca.:3,8 t
maximum number of results exceeded
please refine your search
5 € 
