miwe shop in used for sale

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Total dimensions: 55/54/H42 mm -Total weight: 0,8 kg

Refer to code 1011 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1012 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Pokomat P16/320 Injector Stainless, 16 needle injector, capacity 800Kgs/h, with two sets of needles, belt dimensions 1300mm x 300mm, 3Ph

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/77/H53 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 84/75/H60 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 79/60/H40 mm -Total weight: 0.8 kg

Refer to code 1013 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 65/54/H42 mm -Total weight: 0.6 kg

Refer to code 1015 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 16 mm -Dimensions: see photo technical drawing -Overall dimensions: 56/48/H40 mm - Total weight: 0.5 kg

Refer to code 1017 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Kitzinger crate dishwasher / instantaneous dishwasher - Type: Contino 400NDB1 - Year of construction: 2007 - Bandwidth approx. 70cm - Height entrance: 53cm - Total length: 685cm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm -Total dimensions: 63/55/H46 mm -Total weight: 0.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaw -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 18 mm -Total dimensions: 65/72/H63 mm -Total weight: 1,6 kg

Refer to code 1018 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

HOT AIR GENERATOR model FABBRI F240 second hand machine with n.01 additional fan for fumes expulsion with piping for hot air conveyance CE marks: Yes volt. 380 / 50 APPROXIMATE SURFACE TO HEAT UP: m² 1.000 main fan electrical motor power Hp 4 additional smoke expulsion fan motor power Hp 0,75 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law. Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by on ...

Refer to code 1001 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 52/55/H42 mm -Total weight: 0.6 kg

Injection mortar, two-component adhesive, chemical anchors -Manufacturer:BeA, industrial staples staples type HIT-HY 200-A -Quantity: 12 pieces of injection mortar available -Price: per piece -Transport dimensions: 270/100/H60 mm -Weight: 0.8 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 24 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/73/H68 mm -Total weight: 2,4 kg

Refer to code 1019 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 8 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer

1 of used beer bottling line, make Moravek, new 2007. Consists of Moravek BF sterile filtration unit with Parker DH filter housings for 1.00 and 0.45 micron filter elements, bottle loading table, Harlands Proteus full wraparound self adhesive labeller, ink jet coder, Moravek BC15 beer process control unit with inbuilt carbonator processor and filling machine pressure control system coupled to a Moravek 12/12/1 counter-pressure rinser/filler/crowner with double pre-evacuation, Mapex Flo level detector with faulty bottle rejector, Cheops Termopak tray/pad shrinkpacker and inter-connecting conveyors. Moravek 5SA portable menu-fed CIP set, swing bend plate and associated pipework. Line originally ran at 2.300 bph of 500 m (D 75 x H 225 mm, 26 mm crown-corks), packed as 4x2 and 4x3 on tray/pad + shrinkwrap film. Last used for 330 ml LongNeck bottles (D 60 x H 227 mm).

We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 9 / 19 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/67/H58 mm -Total weight: 1.9 kg

Inner diameter: 150 mm Grinding depth: 200 mm Table lift: 425 mm large oscillating circuit diameter: 250 / 420 mm Bore: 80 mm Table speed -infinitely-0.5 - 10 m/min Workpiece speeds: 125/176/246/350 rpm Spindle speed: 17000 rpm Total power requirement: 2.2 / 0.5 / 0.9 kW Machine weight ca. 2 t Space requirement approx. 2.40 x 1.20 x 1.45 m Control: conventional

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 80/66/H54 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 94/120/H76 mm -Total weight: 3,2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 131/102/H80 mm -Total weight: 5,4 kg

Refer to code 1016 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/64/H60 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H53 mm -Total weight: 1.6 kg

Refer to code 1052 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

For sale : 1000ml SLIM conversion kit for A3flex machine. I send photos by email.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg

Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1 TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 130/100/H80 mm -Total weight: 5.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 80/63/H67 mm -Total weight: 2,1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 51/60/H40 mm -Total weight: 0,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 28 mm -Dimensions: see photo technical. drawing -Total dimensions: 104/110/H83 mm -Total weight: 5.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 15 mm -Dimensions: see photo technical. drawing -Total dimensions: 55/45/H42 mm -Total weight: 0.5 kg

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.