miwe shop in used for sale

MIWE rack oven Roll-In e+ RI 1-0711-TL -in mint condition- - with gas burner - Connected load: 2.6 kW - For trolley sizes 60 x 100 cm or 60 x 80 cm - Incl. 2 rack trolleys made of stainless steel, 8 cushions 80 x 100 cm - Incl. 4 stainless steel rack trolleys, 15 cushions 80 x 60 cm - Condition: Very good, as good as new - Ready for immediate use The stove is in very good condition. It was hardly used and is being sold due to closure. More pictures and information on request.

Deck Oven Miwe Condo C-3-1208 Miwe Condo Model: Type: CO.3.1208 Bottom heat and top heat can be controlled individually Chassis mobile with brake Connection 400V, 3 x 16A-CEE plugs Water connection 3/4 inch, water drain DN 40 Dimensions: 1500 x 1300 x 1950 mm, WxDxH Used oven

Manufacturer: Miwe Miwe Condo deck oven with 2 double chambers, 4 floors, proofing cabinet plus vapor condenser 4 floors Tray dimension: 60x80cm Digital control Dimensions:210x90x120cm Power: 400 / 230V / 50Hz Voltage: 20.9kW

Miwe Electric Oven CO 1.0806 Electric oven 4 floors and fermentation chamber Stainless steel Easy to clean Tray dimension: 80 x 60cm Voltage: 400 / 230V / 50HZ / 3/N/PE Power of 1 deck: 5.9kW

Manufacturer: Miwe Miwe Condo deck oven with 2 double chambers, 4 floors, proofing cabinet plus vapor condenser 4 floors Tray dimension: 60x80cm Digital control Dimensions:210x90x120cm Power: 400 / 230V / 50Hz Voltage: 9.8

Miwe - Deck oven CO 4.0806 2D Deck oven with 4 decks and proofing cabinet Manufacturer: Miwe Model: Condo CO 4.0806 2D With 4 shelves each 80x60cm max. temperature: 320°C Shelf entrance height:13cm With proofer With exhaust air bonnet and steam condenser Year of construction 2013 Power: 18.9kW Voltage: 400V / 50Hz External dimensions: 110x115x210cm

used confectionery oven Miwe Condo CO 4.1208, overhauled, 4 floors, with hood, steam condenser and cooking chamber, shelves 120 x 80 cm, electric, 4 solenoid valves renewed, 4 servo motors renewed, water pot renewed, steam cleaned, Ser. no. 703 774, 33.8 kW, 400/230 V, 50 Hz

A Miwe deck oven is available. Decks: 4, heating type: oil, heating circuits: 2, usable baking area: approx. 8m², oven width: 1200mm, oven depth: 1600mm, max. temperature: 300°C, machine dimensions X/Y/Z: approx. 1600mm/3350mm/2350mm, weight: approx. 2000kg. Including lifting table Unimetall SH 101. An on-site inspection is possible.

A used Miwe Condo CO 5.0806 is currently for sale and immediately available in our warehouse. This stove is equipped with stone slabs of 80x60cm per floor. In addition, the oven has a digital Miwe FP control system per floor for the separate control of the 5 baking levels. With the Miwe FP controller, up to 30 baking programs can be stored. - Manufacturer: Miwe - Type: Condo CO 5.0806 - Stone slab stove - 5 shelves each 80x60cm - Max. temperature 320°C - Digital Miwe FP8 control - Mobile on swivel castors - Floor entrance height: 17cm - Technical data: - 29.1kW - 400 / 230V 3/N/PE - 50 Hz External dimensions: Width: 90cm Depth: 100cm (exhaust hood extra +40cm) Height: approx. 215cm

Rack oven Miwe Rollin RI 1.0608-TXL - Manufacturer: Miwe - Type: 1.0608-TXL - Rotary oven / Baking cabinet / Rack oven - With Miwe TC Touch Control control - Suitable for 60x80cm / 58x78cm trays - With exhaust hood - With gas burner / oil burner - With drive-on ramp Technical data: - Nominal consumption 2.6 kW - Nominal heat load 85 kW - 3N-PE-AC 400V 50Hz - Year of construction 2008 - External dimensions approx. 153x160cm and cm high

Rack oven Miwe Rollin RI 1.0608-TL Electric - Manufacturer: Miwe - Type: 1.0608-TL Electric - electric rotary oven / baking cabinet / rack oven - With Miwe FP control - Suitable for 60x80cm / 58x78cm trays - With exhaust hood - With gas burner / oil burner - With drive-on ramp Technical data: - Nominal consumption : 72.6 kW - 3N-PE-AC 400V 50Hz - Year of construction 2008 - External dimensions approx. 153x160cm and cm high More information and pictures on request

Deck Oven Miwe Condo CO 4.1208 - Manufacturer: Miwe - Model: Condo CO 4.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function -each floor individually 9.45 kW together 37.8kW Entire furnace with proofer 39.7 kW - with proofer Proofer 1.9kW - With exhaust hood - Can be moved on castors - Year of construction 2004

Deck Oven Miwe Ideal 6.1820 - 5 Miwe Ideal deck ovens approx. 22sqm baking area - Manufacturer: Miwe Michael Wenz GmbH - Type: Ideal 6.1820 - a stove is 180cm wide and 200cm deep with 6 shelves - Total baking area of one oven 21.6sqm - with gas burner - with pull-out stoves - Year of construction 2007

MIWE Condo Factory Overhauled with 4 Baking Chamber Proofer and Swath Condenser Stove height 170mm 60 x 80 cm Connected load 26KW CEE Plug 63A Cable length 2.5m Width 900mm Height 2120mm Depth 1500mm Price on request

5 Stoves Shelf size 120 x 200cm Height: 20cm Two-circuit with oil burner Glass Touch Control with hood with LED lighting

Shelf Oven Bakery Oven MIWE AE 8.0604 Product description Manufacturer: Miwe Type: AE 8.0604 Condition: used, functional, Bakery condition Year of construction: 2008 Material: Stainless steel 8 tiers for 60 x 40 cm trays each Proofer with 16 tiers for 60 x 40 cm trays each Connected loads: 400/230 V / 37N/PE / 50 Hz Nominal consumption: 15.4 kW Exterior dimensions: width 90 cm, depth 138 cm (with hood), Height 210 cm See pictures for details.

used in-store baking oven Miwe EconoManufacturer : MiweType : EC 10.0604Year of construction : 201010 Supports for 60x40cm trays with steam condenserBase cabinet 400V 50Hz 15,8kWThe oven is an electrically heated deck oven from the Econo series from Miwe, one of the leading manufacturers of bakery technology.The Miwe Econo EC 10.0604 is an absolute workhorse and a classic in bakeries. A well-preserved, used stove can be an excellent and cost-effective alternative to an expensive new appliance. See pictures for details.

Fully automatic proofing machine Gäromat Miwe GVA 11 LHcreator : MiweType: GVA 11 L400 V 50Hz 3,5kWRdescriptionA used fully automatic proofer Gäromat Miwe GVA 11 L.Fully automatic proofer from Miwefor 1 trolley (60x100) with bottomInner dimensions: 70x100cm Height 190cmCondition: Baker's conditionDetails see pictures

Floors &, In-store baking oven Miwe Condo Manufacturer : Miwe Type : Condo &, Aeromat Type : AE 8 0604 Year of construction : 2009 Elketro 15,4kW Type : CO 1 0608 Year of construction : 2007 Electric 5,9kW 1 shelves and 1 convection oven 8 trays per floor 1 x 60x80cm trays or 2x 60x40cm trays Convection oven for 60x40cm trays on castors Mobile dimensions : W: 90cm D: 142cm H: 220cm details see picture  

In-store baking oven Miwe Aeromat Manufacturer : Miwe Type : Aeromat EC 10. 06.04 Year of construction : 2005 10 supports for 60x40cm trays with steam condenser Nominal voltage : 3-N PE AC 400V 50Hz Nominal consumption 15.8 kW Baker condition Details see picture

MIWE AE 8.0604 Deck shop baking oven / bakery ovenProduct description:Manufacturer: MiweType: AE 8.0604Condition: used, functional, bakery conditionYear of construction: 2010Material: stainless steel8 tiers for 60 x 40 cm trays eachProofing cabinet with 16 tiers for 60 x 40 cm trays eachConnected loads: 400/230 V / 3/N/PE / 50 HzNominal consumption: 15.4 kwDimensions: width 90 cm, depth 138 cm (with hood), height 210 cmDetails see pictures.

Fully automatic proofing machine MIWE GVA Manufacturer : MIWE Type : GVA 21 K(S) Year of construction : 2002 Stainless steel Dismantled 400 V 50 Hz 4.9kW Total dimensions : W:166cm D:106cm H:253cm Wall thickness 6.5cm Bakery condition Details see picture

In-store baking oven MIWE Signo SI-GS 1.622 â Product description âœ" Manufacturer: MIWE âœ" Type: Signo SI-GS 1.622 âœ" Condition: used, functional, bakery condition - please clean thoroughly before use âœ" Year of construction: 2003 âœ" Material: stainless steel âœ" with proofer âœ" on castors, mobile âœ" Nominal voltage: 230 V, 1/N/PE, 50 Hz âœ" Nominal consumption: 2.1 kW âœ" Internal dimensions: 60 x 40 cm (WxD) âœ" External dimensions: 76 x 92 (with handle) x 181 cm (WxDxH) Details see pictures

â Product descriptionâœ" Item condition: Newâœ" Material: stainless steel, heavy quality, very robustâœ" On four swivel castorsâœ" The trolley is suitable for Miwe and WP ovensâœ" Space-saving, can be retracted into each otherâœ" With push-through protection at the front and rear on the drawersâœ" Design: 18 shelves / slide-insâœ" Exterior dimensions with wheels: approx. 64 x 80 x 182 cm (W x D x H)âœ" Height without wheels: approx. 168.5 cmâœ" Height without castors and without head suspension: approx. 164 cmâœ" Insertion dimensions: approx. 59 x 78.5 cm (W x D )âœ" Shelf spacing: approx. 8.5 cmâœ" Price: On requestDetails see pictures.

Deck Oven Miwe Condo Manufacturer : Miwe Type : CO 4.0608 2D Built: 2009 4 Floors per Floor 60x80cm trays or 2x 60x40cm trays with proofer Exhaust hood with steam apparatus Stainless steel mobile Type of electricity : 400/230V 3/N/PE 19,1kW Shelf height : 13cm External dimensions : W: 90cm D: 135cm H: 210cm Details see picture

In-store baking oven Miwe Econo Manufacturer : Miwe Type : EC 6.0604 Year of construction : 2010 6 supports for 60x40cm trays with steam condenser Base cabinet 400V 50Hz 0.2kW Details see picture

Baking Plate / Stone Plate / Oven Plate for Miwe Condo 800x1250x15mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 800 mm x 1250 mm x 15 mm Thickness 15mm Weight 30kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Baking plate / stone plate / oven plate for Miwe oven 625x815x13mm NEWBack plate / stone plate for Miwe condo oven Dimensions : 625 mm x 815 mm x 13 mm thickness 13mm Weight 12.7kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Rack trolley UNI for Miwe + WP NEWstainless steel for Miwe + WP rack oven18 supports for 58x78 cm and 60x80cm sheet metal dimensions: W: 67cm D: 82cm H: 183cmWe have different sizes and supports in stock. For large quantities, please ask 

Baking Plate / Stone Plate / Oven Plate for Miwe 625x415x13mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 625 mm x 415 mm x 13 mm Thickness 13mm Weight 6.5kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Oven plate / stone plate for MIWE Condo NEUMaE : 625 mm x 815 mm x 13 mmThickness 13mm Weight 12.7kgAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

General SKUR0162 MakeAZO Liquids GmbH (D) LocationBarneveld TypeContinous Powder Mixing Main Features MaterialStainless steel Motor12 KW Specified Features - Inline mixer MaterialStainless steel Information No.111182-01 Year of construction2015 Floor space3,3x1,5 M Total height2,8 M Weight1900 Kg Extra SpecificationsIncluded 1 X Blender type PMXR material Stainless steel, motor 2,2 kW, with seal barrier system brand Aerni type AFR 168 ZS 8L max pressure 23 bar with liquid circulation pump 0,18 kW 1 x 520 ltr. tank brand Urban type wasserbehalter serial number 15.1606 pressureless, conical bottom, flat top. single-walled, uninsulated, on legs. 1 x Schenk Process powder funnel MechaTron type GRLS 27.070.000.0083 serial number V093547.A01 built in 2015 with a vibrating chute underneath. 1 x ITT Borneman screw spindle pump type SLH-4G-2033 working pressure 4 bar 5.5 kW. 1 x  ...

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Properties < b >: < / b > Roll length: 430 mm Axle length: 470 mm Roll diameter: 50 mm Shaft diameter: 8 mm Material: Steel, galvanised 6-kant: approx. 11 x 11 mm Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to. Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer y ...

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

The industrial inkjet printer EBS Ink-Jet EBS-230 was produced in 2014. The printer allows for contactless description of various objects that move, for example, on the frame of the fiber laser or on the production conveyor, etc. It is a large-scale printer (6-116 mm, DOD technology). The printer guarantees a legible and durable print on paper, cardboard, plastics (also so-called porous), on fabrics, leather and imitation leather, wood and wood-like products, on ceramic products (also so-called porous), as well as on various types of surfaces metal, etc. An industrial printer of this type is a so-called adapter for another device. It is mounted, for example, at a laser head or an industrial plotter, which cuts elements, while the printer immediately marks them. Technical specifications : - the height of the prints: 6-12.8 with a 7D head (the height of the letter is adjusted by twisti ...

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

Industrial Container Box 650 liters New goods, large crates, stacking containers, large containers, see pictures L 120 x W 100 x H 78 cm 650 liters volume Net weight 43 kg Colour grey Up to 4000 kg load capacity in stack (at 5° room temperature) 2 runners, also suitable for shelf storage Also closed version available. Liquid-tight, drain valve possible 200 pcs available Negotiation price: € 145,-- net per piece ex stock Larger quantities on request! Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly lo ...

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition

QTY 1: New Bainite make 95 litre intermeshing type mixer Model: BMIM95 Intermeshing mixer with hydraulic hopper Net chamber volume: 95 litre Rotor speed: 6 – 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement), Motor power: Siemens 420kW, 1000rpm AC squirrel cage motor with Siemens G150 VFD, Discharge door: Hydraulic drop door type with linear actuator and toggle latch mechanism, Feed Hopper Assembly: Hydraulically operated, Floating weight: single ‘V’ bottom type, Gearbox: Elecon Full unidrive type with S.F. 2.25. Bedplate: Fabricated steel, Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Electrical Controls:  Siemens G150 variable frequency drive controls. Operator control panel with Siemens PLC and HMI.

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98 (year 1998), NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motors, 3ph, 660V, 50Hz. The mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (Can all be quoted if required). Full manuals/drawings available. Available: Immediately (ex stock UK).

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.