miter used for sale

Offer 25282 Specifications: - Saw blade diameter 600 mm - Cutting area at 90° - 190 x 190 mm - 100 x 310 mm - mitred at 45° - 170 x 170 mm - 100 x 220 mm - Saw blade speed 2800 rpm - Drive approx. 4.5 kW - Space requirement approx. W 1470 x H 1800 x D 1550 mm - Weight approx. 450 kg - Digital degree positioning display - Pneumatic device with pneumatic clamping cylinder -Saw blade - Discharge roller conveyor with dimension stop + digital display 5000 mm

Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200

Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm

Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional

mitre joint cuts -/+ degrees: 90 : ja : 250 weight: 400 kg Dimensions (L/W/H): 1500 x 1000 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Rectangle: 200 x 80 or 150 x 70 mm mitred at 45° rectangular/flat: 150 x 70 mm Portrait: 100 x 60 mm 2 cutting speeds by pole-switchable motor: 19 and 28 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Space requirement: 1200 x 1100 x 1620 mm

weight of the machine ca.: 400 kg : ja Dimensions (L/W/H): 1600 x 800 x 1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms

Inv. Num. : 8951 Type: TDC 622 EDGE MASTER Producer: MECAL Created: 2023 Parameters: Maximum sawing speed: 2400 1/min Cutting length: max. 6000 mm Engine power: 13.5 kW Machine weight: 3200 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

A Haffner double mitre saw with robust construction is available. Saw units: 2, indexing positions: 90°/45°/22.5°, unit inclination: 45°, saw blade diameter: 330mm, motor power: 1.1kW, max. cutting length: 3000mm, max. cutting width: 130mm, max. cutting height: 120mm. An on-site inspection is possible.

Graule ZS 135 with roller conveyor and length stop

Graule ZS 170 with roller conveyor and length stop

Key data: 500 mm

Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg

PART NUMBER 7991 SPECIFICATIONS - max blade diameter 400mm - blade hole diameter 30mm - shield cover - Adjustable arm up/down - max cutting height 120mm - max cutting width 540mm - hydraulic saw movement - 3 introductory rollers in the countertop - 3.7kW motor - hydraulic pump motor about 0.55kW - Diameter of the extraction port 110mm - roll width 530mm - machine dimensions l/w/h 1900x1500x1950mm - weight 650kg ADVANTAGES – Polish production – DTR documentation – very good condition – used saw Net price: 13900 PLN Net price: 3310 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Mitre punch - angle cutting machine Manufacturer: Dan-List / Morso Model No.: EH Year of Make: 2008 Fully automatic, electric - pneumatic, 2-hand control Double mitre 45° Single mitre up to 90° Working width max. 100 mm Working height max. 180 mm Cross-section: 70 / 70 mm

Cutting length min./max.: 370mm/5100mm, max. cutting width: 375mm, max. cutting height: 150mm, saw blade diameter: 500mm, saw blade bore: 30mm, swivel range: 45°-90°. Machine dimensions X/Y/Z: approx. 6100mm/1450mm/1450mm, weight: approx. 700kg. An on-site inspection is possible.

Key data: 380 mm

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N  compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area  with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment  - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 ...

Offer 26309 Technical data: - Saw blade dimensions 280 x 3.8 x 40 mm - Saw blade speed 3200 rpm - Cutting area at 90° approx. 100 x 70 mm - 200 x 40 mm - Mitre adjustable left 0 - 90 ° - Right 0 - 45 ° - Compressed air connection 6 - 8 bar - Air consumption per working stroke 10 L/min - Drive 400 V / 0.74 kW - Space requirement approx. W 650 x H 1100 x D 750 mm - Weight approx. 120 kg - with: - pneumatic vert. - vise - Pneumatic coolant spraying device - Feed roller conveyor 2500 mm - Discharge roller conveyor with dimension stop and digital position indicator 3000 mm

Offer 18184 Technical data: - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx. - at 90° around 140 mm - or flat 170 x 140 mm - Mitre adjustable left + right 45 - 90 - 30 ° - Pneum. Saw blade feed - Pneum. Quick-release vise - Pneumatic connection - Original machine base - Feed roller conveyor 3000 mm - Discharge roller conveyor with dimension stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Weight machine approx. 150 kg

On a pallet. Auction-ID: A1-49727-8

Brand/model: Festool KS 120 EB (Kapex) Power: 1600 W Voltage: 220-240V, 50/60Hz Speed: 3400 min⁻¹ Saw blade: Ø260/Ø30mm Year of construction: 2011 Serial No.: 10762264 / T-No. 495773 Auction-ID: A3-46156-11378