135,500 used machines on RESALE, but how to find them? Machine Search
Griggio Unica 400 sliding table saw Manufacturer: Griggio Type: Unica 400 Year: 2010 M-Nr.: MC00101468 Main saw: ø400 mm, saw height: 125 mm, tilting: 0-45° Saw height setting, tlting: electric with digital counter Rotation speed: Cutting Heigt: 0-125 mm electric with digital reading Saw tilting: 0 – 45° electric with digital reading Motor: 7.5 KW Scoring saw: 0.75 KW, ø125 Sliding Table: 3.200 mm Cutting Width: 1.250 mm electric with digital reading on the fence Cross cut fence: 2.200 – 3.300 mm Side table: steel with angle prefix, productsupport and easy loading roll Dust extraction: Top: ø80 mm, bottom: ø120 mm Weight: 820 KG Condition: Full Functionaly
HARWI 1850 Giraffe vertical panel saw Manufacturer: Harwi Type: Giraffe 1850 M-Nr.: 5008KM Year: 2003 Max. Cutting Heigt: 1.850 mm Max. saw width: 4.300 mm Max. Dept/- panelwidth: 55 mm Saw blade diameter: 250 mm Saw Blade Arbor: 30 mm Motor: 3.0 kW, 400 V, 4.3 Amp Saw RPM: 2.800 tpm. Product support bottom: Blocks Sawwall: Closed rear support wall Product support small work pieces: Yes Measurement system: vertically and horizontally analog Turning sawhead: Manual Sawing motion: Manual Machine frame : stand-alone A-frame Dust extraction: direct hood suction Saw truck fixation: Manual Suction connections: 80 mm Dimensions: 5.200 x 1.300 x 2.700 mm Weight: 570 KG Condition: Fully functional tested.
Harwi 130 Type: 130 M-Nr.: 4000JG Year: 1995 Cutting height (Max): 25 – 135 mm Cutting height 45° ( (ø450 mm): 98 mm Saw diameter (max): ø450 mm Saw blade inner-ø: ø30 mm Saw width (max): 0-650mm Saw blade tilting: 0-45° Motor: 5,5 kW RPM-Motor: 2800 rpm RPM-Saw blade: 2801 rpm Dust extraction points: 1 x 100, 1x120mm Weight: 320 KG
Key data: 400 mm
Cold circular saw Make: Kaltenbach Type: KKS EG-H/M45NC Built in 1995 Semi-automatic cold circular saw Vertical saw with cut from below and rotating saw table -Saw blade Ø 400 mm -Hydraulically adjustable saw blade feed -Coolant pump for coolant flow -Pin and chip scraper -Adjustable workpiece stop for using the full working width -Rotary table for oblique and longitudinal cuts, rotation range 90° to each side Max. sawing capacity: Fl. 300x40 mm, or 120x120 mm Height: 1860 mm Width: 1070 mm Depth: 800 mm Weight: approx. 900 kg with infeed roller conveyor 6 m and with discharge roller conveyor 3 m with controlled measuring carriage (M45NC) programmable, automatic operation little used Technically good condition Visually good condition Machine is still in commercial use and can be viewed by appointment. Transport from the hall an ...
Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastic, aluminum, brass and steel alloys Auction-ID: A7-50066-84
et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-161
et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-261
Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 attachment, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, tiles and natural stone. Auction-ID: A7-50066-126
Motor power: 900 W, Maximum cutting depth: 115 mm, Variable speed trigger: 0-2800 rpm, Tool-free blade change, Comfortable ergonomic handle with soft coating, Adjustable base Auction-ID: A7-50066-176
et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-61
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-66
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-166
Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastic, aluminum, brass and steel alloys Auction-ID: A7-50066-284
Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 attachment, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, tiles and natural stone. Auction-ID: A7-50066-226
Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastic, aluminum, brass and steel alloys Auction-ID: A7-50066-184
9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-50066-266
Motor power: 900 W, Maximum cutting depth: 115 mm, Variable speed trigger: 0-2800 rpm, Tool-free blade change, Comfortable ergonomic handle with soft coating, Adjustable base Auction-ID: A7-50066-276
Motor power: 900 W, Maximum cutting depth: 115 mm, Variable speed trigger: 0-2800 rpm, Tool-free blade change, Comfortable ergonomic handle with soft coating, Adjustable base Auction-ID: A7-50066-76
Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50066-372
Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 attachment, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, tiles and natural stone. Auction-ID: A7-50066-26
Basic equipment of the series: - Rear machine table with collets and roller rails - Program slider for material positioning via collets - Machine table on saw body with recesses for the collets - Pressure beams for material fixation during cutting - Robust saw carriage, with main and scoring saw, as well as angle pressure device - Integrated drilling and milling unit for undercut drilling - Cadmatic4 control with PowerTouch user interface Technical data: Cutting length 4300 mm Cutting width (program slide travel) 5800 mm Roller rail (element 8-lane) 2 pieces Roller rail (element 2-lane) 4 pieces Collets 7 pieces Pitch 75/275/475/1075/1425/1825/3425 mm measured from the angle ruler to the middle of the collet Air cushion table with frontal roller element 2160 x 800 mm 2 pieces (as item 1 extended one after the other on a stop ruler) Air cushion table with frontal roll ...
Sawblade tiltable: 45 ° Length of the rolling table: 3.200 mm cutting width: 1.250 mm Motor output: 7,5 kW Cutting height: ca. 204 mm Saw blade diameter: 550 mm Speed: 3000 / 4000 /5000 U/min. weight of the machine ca.: 1.200 kg : Nein : Elektrisch : Elektrisch : Ja : Digital The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Additional technical specifications: • Material feed support length: approx. 1900 mm • Material discharge support length: approx. 5000 mm • Hydraulic clamping: available • for miter cuts
Drehzahl: bis 3000 U/min, max. Sägeblattdurchmesser: 315 mm, Betriebsspannung: 380 V, Frequenz: 50 Hz, Anschluss: 2600 W, Nennstrom: 5,5 A, Tischabmessungen: 1100 x 660 mm
• Incl. left roller conveyor • Roller conveyor width: 240 mm
Additional technical specifications: • Digital display: available • Roller conveyor: available • Roller conveyor length: approx. 3000 mm
Additional technical specifications: • Support surfaces right and left: 4000 mm each • operating voltage. 3 x 400 V
Incl. sliding table, incl. extraction system from manufacturer SCHEPPACH. Attention: the machine can be transported on a standard truck! Additional technical specifications: • Incl. sliding table • Slide length: approx. 3100 mm • incl. extraction system from manufacturer SCHEPPACH
• Incl. roller conveyor on the left • Roller conveyor width: 400 mm
cutting diameter: 400 mm capacity 90 degrees: flat: 500 x 400 mm saw band length: 6220 x 41 x 1.3 mm speed: 15.0 - 150 m/min work height max.: 750 mm workpiece weight: ca. 250 - 300 kg/m Control: MEBA NC coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: ca. 2250 kg range L-W-H: 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only - User-friendly NC dialog control With plain-text display 5.7-inch CE panel Program memory with 50 programs, each with 20 steps - Automatic material feed Minimum cutting diameter .. Ø 5.0 mm Residual piece length without bundle clamping .. manual 25.0 mm Residual piece length without bundle clamping .. automatic 110 mm Automatic movement of the ...
Cutting capacity: round 230 mm, square 230 mm, flat material 280 x 150 mm Cutting speed 15 – 110 m/min Mitre cuts left 45°/60° Automatic workpiece feed Hydraulic lowering Micro Spray System Coolant Setup Hold-down device Roller conveyor
: gebraucht : 2023 : 6246 : prompt, Zwischenverkauf v : Italien : 2970 € : 1 : 300 mm : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 500 mm : 1050 mm : 990 mm : 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via ...
Eima Sliding Table Saw Type 122 Cutting width min/max 210-2565 mm Cutting depth of cutting 2500 mm Maximum blade diameter 400 mm Cutting height ~100mm Tilting cutting unit 90° – 45° 2×4.4kw motor Total power requirement 10kw Electronic Cutting Width Eats Technical documentation and CE certificate Net price
cutting diameter: 260 mm saw band length: 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square: 260 x 260 mm capacity 60 degrees: flat: 320 x 260 mm cutting length min.: 6 mm cutting speed: 12 -120 m/min Control: KASTO BasicControl total power requirement: 2,5 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade, designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade, selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable fro ...
cutting diameter: 360 mm saw band length: 4870 x 41 x 1,3 mm cutting width: 360 mm cutting speed: 11 - 110 m/min : 4,0 kW height of the workpiece: 800 mm weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,3 x 1,9 x 2,2 m Automatic hydraulic band saw with - SIMATIC OP17 NC control - Single material feed 600 mm - Max. programmable length 6000 mm - Hydraulic saw blade tensioning (36–40 bar) - Motorized chip conveyor - Emergency stop device - infeed roller conveyor 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 260 mm Rund documentation: vorhanden automatic feeds: ja : ja weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1,7 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Ficep Model: K 60 Year: 2012 Condition: Used Stock number: 9525 Cutting area: 60 x 10 - 610 x 310 mm Strap length: 6350 mm
Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 mm Saw blade outstand: 125mm Main cutting motor 13,5 kW Sawblade diameter 450 mm. Scoring saw motor 2,2 kW Feed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/min Speed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm. 5 air flotation tables in the front 2810 x 650 mm Controlls: CAD-matic 4.0
Cutting capacity: 4300 mm x 4300 mm. Sawblade height: 125 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 1-150 m/min. Returnspeed 150 m/min. Programm fence speed: 90 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1075/1825/2625/3425 mm. Machine control: CADmatic 4 ? Professional Hardware: Windows XP (US) TFT display Software showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.
saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg
cutting diameter: 420 mm saw band length: 4570 x 41 x1,3 mm table height: 800 mm cutting width: 400 mm capacity 90 degrees: round: 420 mm capacity 90 degrees: flat: 300 x 200 mm capacity 90 degrees: square: 300 x 200 mm cutting speed: 15 - 90 m/min total power requirement: 7,0 kW weight of the machine ca.: 2200 kg dimensions of the machine ca.: - m Standard Accessories for the HFA Series - Chip conveyor - Feed pressure regulator - Cut length adjustment - Multiple feed - Piece counter - Powered chip brush - Hydraulic belt tensioning - Stepless belt speed control - Jog button - Cutting and guide plates - Automatic zero stop - Cutting accuracy monitoring - NC cut length programming - Error reporting system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brand: FAT Model No.: MOD 270 Year: 1999 Motor: Three-phase, 400V. Manual band saw with 2 cutting speeds. Cutting capacity: - Round, 90º - 220mm - Round, 45º - 170mm - Round, 60º - 90mm - Square, 90º - 215mm - Square, 45º - 170mm - Square, 60º - 90mm - Rectangular, 90º - 250x170mm - Rectangular, 45º - 170x170mm - Rectangular, 60º - 90x90mm
cutting diameter: 420 mm saw band length: 6300 x 41 x 1,3 mm cutting width: mm table height: mm size of profile - max.: mm cutting speed: 10 - 130 m/min saw band length: 4870 x 27 x 0,9 mm total power requirement: 9,0 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 3,5 x 2,35 x 2,1 m Fully automatic band saw - Control Minipos 807 - with chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gebr. Veneer Saw Joining and fine-cutting saw SCHEER FM2-3000 Saw unit: 2.5 hp (approx. 1.85 kW) Max. cutting length: 300cm Pressure beam adjustable by handwheel Angle stop on the left side rear side tables Saw is running. Sale in the current condition and unobsolete from carpentry dissolution (1-man operation). Fixed price.
cutting diameter: 260 mm capacity 90 degrees: round: 260 mm capacity 90 degrees: square: 250 x 400 mm saw band length: mm table height: mm cutting speed: 20 - 80 m/min Control: konventionell total power requirement: 2,0 kW weight of the machine ca.: kg Dimensions (LxWxH): 2,0 x 1,4 x 1,2 m Horizontal band saw, semi-automatic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mm throat: 900 mm workpiece height: 400 mm table-size: 700 x 660 mm saw band length: 4630 mm turning speeds: 45 - 500 m/min : mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Dimensions (LxWxH): 1,95 x 0,9 x 2,25 0 Band saw with - Ideal welding machine - Belt grinder - Table tiltable -15° to +45° - Pneumatic height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
37 € 
