miter saw used for sale

Paoloni S150 sliding table saw Trolley length 1500mm Cutting width on the right side 1410mm Scoring Scoring Shears Cutting height max 90mm Manual adjustment of the saw angle up to 45° Manual lifting and lowering of the saw 5.5kw main motor Saw size max/min 315/250mm Scoring saw size 120mm CE Certificate

IRION trimming circular saw without cross-cut saw system Saw blade Fixe ( singable ) Cut length 6200 mm

IRION Manual Pendulum Saw Adjustment 45° + / - Suction connection Top condition Motor 7.5 KW

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 54900 € : 1037.61 € : Doppelsäulenführung : 5400x41x1,3 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm : 1.1 kW : 4 kW : 0.12 kW : 2850 mm : 2350 mm : 2000 mm : 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,-- The data for this ad was created with ModulMWS - the sof ...

Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

I am selling a panel sizing saw HOLZMA HPP380/38/38, built in 2008. Cutting surface 3800x3800mm. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5867mm x D.6637mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.0 optimization software included. Very good condition. Available the same.

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm

OMGA Radial 700 Radial Saw Cutting width 90° max 700mm Cutting height max 110mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.61kw main motor Pneumatic feed of the cutting deck Net price

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw Ideal for sawing work even in wet, damp rooms and shafts, wherever electric reciprocating saws are not permitted. -Output power: 1000 W -Steel pipes: up to max. Ø 160 mm -in the suitcase -Number: 4 saws available -Price: per piece -Dimensions: 690/200/H120 mm -Weight: 8 kg

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm Net price

Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present -Dimensions: 2080/1400/H1390 mm -Weight: 670 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.770 mm -Cutting height: max.400 mm -Saw band: length 5330 mm -Work table: pivoting -Dimensions: 1470/935/H2390 mm -Total weight: 743 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, Vertical band saw USF-5R -Drive: 3 kW -without brakes, removed -Cutting width: max. 500 mm -Cutting height: max. 400 mm -Saw blade: Length 3850 to 4050 mm -Saw blade speed: stepless -Work table: swiveling -Accessories: including additional band saw blades (see photos) -Dimensions: 1300/910/H2140 mm -Weight: 625 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.780 mm -Cutting height: max.480 mm -Saw band: length 5600 mm -Work table: pivoting -Dimensions: 1420/920/H2400 mm -Total weight: 800 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height: 70 mm (max. ca. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° -Chip extraction: with gate valve for connection to a central extraction system -Dimensions 1020/850/H1300 mm -Weight: 188 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm -Weight: 162 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, vertical band saw type USF 10R -Drive: 2.2 kW -Cutting width: max. 1020 mm -Cutting height: max. 275 mm -Saw band: length 4700 to 4800 mm -Saw band speed: continuously adjustable from 12-2000 rpm in 4 gear levels -Work table: pivoting 45°/15° -Dimensions: 2160/1000/H2000 mm -Weight: 1250 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Leitz, saw blade for non-ferrous metal or plastic, unused in original packaging -Type: 165828 300x3.2/2.6x32 Z72/13.09 -Inside: Ø 32 mm -Number of teeth: 72 teeth -Speed speed: n max. 7600 rpm -Quantity: 1x saw blade available -Dimensions of box: 380/380/H15 mm -Weight: 1.6kg/piece

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Crosscut and mitre saw, pull saw, crosscut saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double mitre, aluminum crosscut saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw -Manufacturer: Graule Type ZS135 -Engine power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, pivoting -Cutting area: 90° flat 430 x 135 mm -Cutting area: 45° flat 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm -Weight: 185 kg with pallet

scoring circular saw blade, scoring circular saw blades, HW scoring saw -Manufacturer: Schäffer, Vorritz circular saw blades HW-Vorritzer 2-part, adjustable -Type: 120 x 2.8-3.6 x22Z=2x12 -Number: 9x scoring saws available -Price: per piece -Dimensions box: 225/220/H10 mm -Weight: 0.3 kg/piece

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, Bi-metal saw band M42 VPE with 10 pieces unused Ovp -Type: Biflex Kobali M42 3660 x 25 x 0.90 mm -Quantity: 2x box available -Price/Distribution: per box -Transport dimensions: 790/600/H35 mm -Weight: 8.2 kg/piece

saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 902-38 SUPER PLUS -Type: Ø 420x4.8/3.5x60 Z 72 = T 18.32 -Order No.: 0224 421 60 --Art. No.: 0910-10815670X HW -Speed: n max. 4300 rpm -Number: 7x saw blade available -Price: per piece -Dimensions box: 490/490/H10 mm -Weight: 3.9 kg/piece

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/400 with saw band welding device -Cutting width: max. 390 mm -Cutting height: max.215 mm -Engine power: 1.1 KW -Saw band: length 2780 to 2980 mm -Saw blade speed: adjustable -Work table: swiveling -Band saw welding machine: Ideal BSO -Dimensions: 1050/630/H1670 mm -Weight: 414 kg

Pipe reciprocating saw, pipe jigsaw, beam jigsaw, reciprocating saw, guide holder, pipe clamp -Manufacturer: Fein, holder for pipe reciprocating saw type AST 663 or similar -Clamping: with lashing strap -Number: 2x holders available -Price: per piece -Box dimensions: 390/310/H425 mm -Weight: 25 kg/piece

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg

Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 850/850/H1310 mm -Weight: 176 kg

CENTAURO cast iron band saw model CL800: - with 800mm solid flywheels - Motor KW 5.5 / HP 7.5, Volt 380 - Tilting table up to 20° - upper and lower blade guide Year 1998, machine according to CE standards AVAILABILITY FROM JUNE 2026

SCM horizontal panel saw model Z45 with: - Useful cutting length 4500mm - Useful cutting depth 2100mm - Useful cutting height 90mm - motorized pusher with CM400 electronic programmer - Side guide with manual stops, for cross-cuts -1 fixed front plane L=2500mm -2 movable front floors L=1500mm Machine not CE compliant, for export AVAILABILITY FROM JUNE 2026

Saw blade diameter vertical: 550 mm Saw blade diameter horizontal: 500 mm Max. profile height: 250 mm Max. feed: 830 mm Digital angle displays for material stop and tilting of both sawing units Pneumatic material tensioners Minimum quantity spraying device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Manufacturer: Hüllhorst, Year: 1995, Type: KLS 430, Control: Ferrocontroll, Program: 250, Cutting depth mm: 120, Working hight mm: 60, Holz-Querschnitte mm: yes, Positioniergenauigkeit mm: +45-45, Feeding speed max m/min: 3800 kann verlängert werden, Feeding speed continous adjustable: ca.4, Slewing range degrees: yes, Work piece length max mm: no, wood lenght max mm: 500, Loading stations: 5000, Strichcodierung: yes, Saw Blade Diameter mm: 8, Length to slide in mm: yes, Spindles: yes, Drill head vertical controlled spindles: yes, Exhaust diameter mm: yes, machine ready for demonstration: zusätzlich 90 Grad Sägestation und Etikettendrucker, Year :1995

Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement.

HOLTEC STIHL ES 121 SHKA Parcel Cross-Cut Saw 2001/2021 With approx. 15m roller conveyor, as good as new! The ES121 F/SHK is the simplest solution for precise end cuts – even from unedged and gap-stacked goods. Cutting with the positionable saw unit They rest parcels to the desired length. This system is also ideal for users with a small footprint. Guide rail swivels hydraulically at a 90° angle around a fixed pivot point Max. cutting accuracy and optimal cutting force distribution with hard chrome-plated pointed tooth chain or carbide-tipped pointed tooth chain from the Home STIHL available HOLTEC guide rail (stellitated on both sides – four-way reversible) ES 121 with roller conveyor and stationary sawing unit – the classic cut for dividing long packages into fixed lengths By means of a movable trolley, the packages are positioned exactly to t ...

Circular Saw Milling Machine KNAPP KFS Profi T -used-format sliding carriage, with boom table, circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, finely adjustable milling stop---------- Technical data ----------Format sliding table Cutting length: 2,000 mm, cutting height: 103 mm, cutting width: 700 mm, max. saw blade Ã: 315 mm, swivel range circular saw: 45 Â, milling spindle diameter: 30 mm, swivel range milling machine: 45 Â, milling machine speeds: 2,850, 4,000, 7,800 rpm,

Key data: 300 mm, 3920 mm, 34 mm

Extensive standard equipment: Double Column Structure Double Vice with Full Stroke Tension (Hydraulic) Floating Pendulum Vise Hydraulic Saw Band Tension Automatic feed in pendulum mode (500mm) Carbide saw blade guide system Stepless speed control by inverter Driven wire brush Work Light Automatic Chip Conveyor User-friendly NC control with touchscreen Display of belt speed on the touchscreen Flushing hose for machine cleaning

OMGA Radial RN 450 Radial Saw Cutting width 90° max 450mm Cutting height max 80mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.21kw main motor Saw size 300mm Power supply 220V