135,186 used machines on RESALE, but how to find them? Machine Search
Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics
Key data: 600 mm, 45 °
Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg
Key data: 600 mm, 20 °
Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg
Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates
Morsoe mitre punch, various, in good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm
Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER
Key data: 550 mm
Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)
Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device
Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible.
Max. saw length: 6,000 mm Max. saw blade diameter: 500 mm Automatic positioning via Diamond control of length and angles Swivelling of the angles inwards and outwards possible (20-135°) Moving roller conveyor Soundproof booth Minimum quantity spraying device Chip conveyor belt Weight: approx. 2,800 kg
Key data: 500 mm
Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum quantity spraying device Weight: 1800 kg
Lenght 6 m E355 positioner controller Saw diameter 420 mm
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device
Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm
Offer 25115 Radial arm - Schiffterschnitt - Pendulum train saw Specifications: - Saw blade diameter 400 mm - Saw blade speed 3000 rpm - Cutting height up to approx. 125 mm - Cutting depth up to approx. 600 mm - Mitre adjustable in 2 axes - Table size approx. W 800 x D 800 mm - Table height 920 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 800 x H 1900 x D 1100 mm - Weight approx. 200 kg
Graul zs170N with 3 KW motor, wheel adjustment tilt front, or rear Machine stand, oil brake, printer, digital angle display horizontal and/or vertical
Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg
cutting diameter: 500 mm cutting length: 5000 mm saw blade diameter: 420 - 500 mm dimensions: ca.6400 x 1500 x 1600 mm weight: ca. 1600 kg feed: stufenlos digital readout: Motorized length adjustment with digital display manual and spare part list included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 45 °
The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm
Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional
Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200
mitre joint cuts -/+ degrees: 90 : ja : 250 weight: 400 kg Dimensions (L/W/H): 1500 x 1000 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight of the machine ca.: 400 kg : ja Dimensions (L/W/H): 1600 x 800 x 1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms
Inv. Num. : 8951 Type: TDC 622 EDGE MASTER Producer: MECAL Created: 2023 Parameters: Maximum sawing speed: 2400 1/min Cutting length: max. 6000 mm Engine power: 13.5 kW Machine weight: 3200 kg
Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg
Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg
Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation
cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Graule ZS 135 with roller conveyor and length stop
Graule ZS 170 with roller conveyor and length stop
PART NUMBER 7991 SPECIFICATIONS - max blade diameter 400mm - blade hole diameter 30mm - shield cover - Adjustable arm up/down - max cutting height 120mm - max cutting width 540mm - hydraulic saw movement - 3 introductory rollers in the countertop - 3.7kW motor - hydraulic pump motor about 0.55kW - Diameter of the extraction port 110mm - roll width 530mm - machine dimensions l/w/h 1900x1500x1950mm - weight 650kg ADVANTAGES – Polish production – DTR documentation – very good condition – used saw Net price: 13900 PLN Net price: 3310 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
A Haffner double mitre saw with robust construction is available. Saw units: 2, indexing positions: 90°/45°/22.5°, unit inclination: 45°, saw blade diameter: 330mm, motor power: 1.1kW, max. cutting length: 3000mm, max. cutting width: 130mm, max. cutting height: 120mm. An on-site inspection is possible.
Cutting length min./max.: 370mm/5100mm, max. cutting width: 375mm, max. cutting height: 150mm, saw blade diameter: 500mm, saw blade bore: 30mm, swivel range: 45°-90°. Machine dimensions X/Y/Z: approx. 6100mm/1450mm/1450mm, weight: approx. 700kg. An on-site inspection is possible.
Key data: 500 mm
Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg
Mitre punch - angle cutting machine Manufacturer: Dan-List / Morso Model No.: EH Year of Make: 2008 Fully automatic, electric - pneumatic, 2-hand control Double mitre 45° Single mitre up to 90° Working width max. 100 mm Working height max. 180 mm Cross-section: 70 / 70 mm
Key data: 380 mm
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...
Equipped with detachable roller conveyor, dimension approximately: 2x 2000x420x900 mm. Includes extra saw blade, cantilever rack, dimensions approximately: 1600x650x1900 mm. Auction-ID: A1-48474-83
Please note! Out of operation Auction-ID: A1-48474-6
Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 ...
maximum number of results exceeded
please refine your search
10 € 
