mini used for sale

Roll width: 2600mm, controls: SIEMENS SIMATIC HMI, machine was overhauled in 2015.

Capacity: 19l, operating temperature: 0-140°C, working overpressure: 6bar, controls: SEDOMAT 5500, with documentation, the machine was hardly used.

Print dimensions: 2000x1000mm, length: 3425mm, width: 815mm, height: 1765mm, weight: 600kg, including loading & unloading equipment, air-conditioned protective cabin and infrared preheating, with documentation, an inspection is possible.

Shaking incubator, Internal dimensions (mm): 680x490 H440, external dimensions (mm): 800x670 H730, Shaking plate surface: Length 480 mm / Width 420 mm, Speed: 20-400 rpm, Maximum temperature (°C): 65

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Machine like NEW () Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion ...

Condition: well-kept, fully functional Availability: as of now Connected load: 1.8 kW

M. No.: 1253 Format (cm): Min. 10×15 / Max. 50×70 Sheet weight 80 to 400 g.s.m. Equipment / Additional information: Grammage: 60 - 600g / m² Voltage: 400 V / 50 Hz

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Automatic through-turn machine Genini Miniautomat Automatic rolling machine from square timber, through Main spindle with 4.9/5.9 kW two-speed motor Variable spindle speed 1800/2350/3600/4700 RPM 1.5 kW hydraulic pump motor Maximum length of scantlings 950 mm Maximum turning length 120 mm Maximum turning diameter 80 mm Two bottom brackets with profiling knives 1 face spindle for drilling or face profiling 1 roughly rolling knife

Manufacturer: Franke, Type: Beschlagbohrmaschine MInifix, Function: Beschlagbohren und Setzen, Work piece width min-max mm: 30-1200, Min.-max. workpiece length in mm: 150- ca.1700, Min.-max. workpiece height in mm: 10-40, Magazin for hinges!: Minifix, Set buffer: no, Working range X: 1700, Working range Z: 25, Drill gearings: 2, Drilling supprt from bottom: 2, Drill gearings: 2, Drill gearings: 2, Number of spindles: 2 + 2, Tool exchange places: yes, FREE TEXT: für leichtes rüsten Anschlag Arretirung all 16 mm,

Table height manually adaptable: 0 - 20 cm max oscillation of the table: 20 cm max drilling depth: 13 cm table: 53 x 23 cm motor: 1,5kW

• for aluminium tubes with twofold/fourfold seam • output max. 2.100 tubes/h, the maximum speed depends on the format and product • tube-Ø 10-40 according to change parts • tube length 50-250 mm • dosing 50-250 ml • product parts 1.4404 (AISI 316L) • 10 l filling funnel with stirrer • tube feeding magazine • tube orientation device • embossing device for max. 8 characters • change parts for tube diam. 20, 24 + 35 mm • discharge via chute • touch screen • PLC Hitachi EH-D40DTPS • batch printer • 400V/50Hz/14A • mobile • as good as new

• Semi automatic for all heat sealable films (PP/PVC/PE/Cellophan) • Object dimensions in pass-through direction width 60-320 mm, length 30-250mm, height 18-96 mm • Output subject to product and operator speed • For folding section no change parts necessary, only for product pusher and welding section • Film roll outer diameter max. 300 mm, inner diameter 70-83 mm, roll width max. 420 mm • Siemens Simatic Panel Touch • PLC Siemens Simatic ET 200S (Profibus) • Safety light-barrier • Foot pedal • Electr. connection 230V/50/60Hz

Polishing bench grinder, polishing machine, grinding machine, polishing bench, erector, precision grinder, electer -Testa: MINIPOL-T with precision grinder NSK and accessories -Precision grinder: Type NSK Electer ET NK-260 N -Accessories: see photos -Transport dimension: 310/120/H250 mm -Weight: 8.2 kg

Central unit, control, switchgear, CPU, PLC -Manufacturer: B&R Bernecker & Rainer, Minicontrol with Control Panel -Product number: MCGE33-0 -Individual components: see photos -Dimensions: 255/130 / H220 mm -Weight: 2.3 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Descaling pump, universal suction, pressure and circulation pump -Device: for problem-free descaling -of smaller water systems such as heating coils, gas flow and Circulating heaters, water boilers, etc. -Drive: 220 volts -Max. Delivery rate: 6 l/min -Max. Delivery head: 40 m -Dimensions: 420/420/H410 mm -Weight: 9 kg

Sawblade tiltable: 45 ° Length of the rolling table: 3260 mm cutting width: 900 mm Motor output: 5,0 kW Cutting height: 100 mm Cutting height at 45°: mm Saw blade diameter: 315 mm Speed: U/min. weight of the machine ca.: 489 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine is in very good condition 15 screen X : 406 mm Y : 305 mm Z : 254 mm(Can be extended to 360 mm) Chip Conveyor Auger

Haas Minimill HE CNC milling machine for sale. HE version, i.e. with an enlarged Z axis departure by approx. 70 mm working compared to the standard Minimill version. Milling machine manufactured in 2008, fully operational. In our company, it is used for unit production (steel and aluminum) and short series

Year of construction 2011, 4870 h, 10.3 kw, dozer blade, 1x embankment bucket, 1640 kg own weight

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12400 € : 254.2 € : 45 to : 175 mm : 4 : 27 x 12 mm : 15 mm : 16 1/min : 300x10 / 200x13 mm : 80x80x8 mm : 7 mm : 2,2 kW : 1360 mm : 1100 mm : 1500 mm : 800 kg 4 working stations foot pedal hydraulically driven oil filled table at punching and notching station with gauge user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 410 mm Length of the planing table: 2.200 mm Number of knives: 5 St. Motor output: 5 kW weight of the machine ca.: ca. 411 kg : Tersa : Ja Dust suction hood: 120 mm turning speeds: 5.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction 2016, 12 kw, 4468 h, 1x 50 cm Lehnhoff backhoe bucket (65 kg dead weight), dozer blade, 1960 kg dead weight

Wiesheu Minimat 64M+64L with extractor hood and proofer in-store oven The device is used but in very good condition, completely overhauled 1 x Wiesheu Minimat 64-M 1 x Wiesheu Minimat 64-L 1x exhaust hood (steam condenser) 1 x Proofer Menu operation - German, English The baking station has been checked for electronic and mechanical capabilities. It was also cleaned. Viewing and test run is possible at any time in Gochsheim.

Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!

---------- Technical data ---------- Number of spindles: 6 pieces, motor: 230 volts Sold as is, without technical inspection

Fully automatic offset and digital Touch Screen Auto-Balance Temperature Pneumatic Pressure Sheets size : 210x297 – 380x700 mm Sheet weights : 130-350 g/m² Speed : 15 m/m (2000 sheets SRA3/hour – 1800 sheets B3 portrait/hour)

4 floors for 4x trays 60x40cm with proofing cabinet with exhaust hood incl. condenser DMS 3 master timer control Top and bottom heat separately adjustable power: 16,5 kW 400V / AC /3Ph / N / PE / 50 Hz Dimensions: Height: approx. 210 cm width: approx. 98 cm depth: approx. 100 cm floor entrance height 14cm

Working width: 410 mm; Planer shaft: Tersa knife; Number of knives: 4; dressing table length: 2000 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Display of planer thickness: mech. Counter; Feed speed: 6 / 12 m/min; Feed roller: steel; Pull-out roller: steel; Pressure bar: Yes; Table rollers: no; Motor power: 5 kW; Engine braking: yes, automatic; Suction connection: 120mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 430kg; TERSA planer knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and uniform material feed material feed with two speeds Numerical display for thickness table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Work tables ar ...

General SKU257T413 LocationBarneveld MakeLarox TypePF1.6 C2 No.480 Year of construction1995 Main Features MaterialStainless steel/Polypropylene Pressure103 Ton Specified Features - Sieve belt press Belt press103 kN Belt width1050 mm Belt length2400 mm Roll dimensions960x1850 mm Number of pressure rolls1 MaterialPolypropylene, Stainless steel Information With switchas is Weight13 000 kg Floorspace4,3x2 m Total height2,6 m Extra Specificationswith: hydraulic unit: 11 kW 230/400 Volt, : 2x pomp: Larox, 10 m3/h, 2,2 kW 230/400 Volt (Ex) hydraulic tank: sieriaco 100 Ltr. and : 300 Ltr. Sieve belt pressesLarox FinlandFilters > Sieve belt pressesBrand > Larox Finland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

General SKU220M118 LocationBarneveld MakePatterson-Kelley Co. USA TypeMini-Processor No.300260 Year of construction1994 Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume7.5 Ltr. Specified Features - Tumbler dryer Tumbler dryer(1x) Capacity8 quart = 7,5 Ltr Diameter180mm Cylindrical length170/300mm Outletdia. 90mm With jacket(with electric heating) Max. temperature212 Degr. F. (= 100 Degr. C.) Motorcheck With variable speed drivecheck With lump breakerIntensifier bar With vacuum pumpmake Busch MaterialStainless steel 1.4301 (304) Information With switchcheck Floorspace1,9x0,9 M Total height1,4 M Weight650 KG Technical specs Extra informationvacuum at 212 Degr. F. (100 Degr. C.)Tumbler dryersPatterson-kellyDryers > Tumbler dryersBrand > Patterson-kelly What you can expect from Foet ...

Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long

drilling machine drilling lines 7 spindles Motor 1.1 kW Fence left and right 1.5 m.

NAWROCKI feed granulation line Feed granulation line from Polish producer Mechanika Nawrocki. The company has many years of experience in the production of granulators. The line consists of: - M-ROL H-122 flail mill - engine power 11 kW - M-ROL H-037/4 feed mixer with a capacity of 2 tons with scales and an additional component feeder - M-ROL T-401 screw conveyor - a silo for a ready-made granulation mixture with a capacity of 7 tons, pouring into the granulator using a screw conveyor with an inverter that allows you to precisely adjust the amount of material fed to the granulator - Nawrocki miniPelleter 18.5 kW granulator - Nawrocki miniCooler + cooler - bucket elevator receiving to the cooler - counterflow cooler - bucket elevator with a screen behind the cooler - miniCooler + aspiration team - cyclone with a lock - dust and screenings container - 2.2 kW fan Granu ...

max. weight 60 kg; min. weight 0,4 kg. More then 300 machines new and second hand on our seema .de

Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg

We hereby offer this used Haas Minimill HE vertical machining center from 2008, located in Poland. This vertical machining center is powered by a high-precision Haas control unit, ensuring exceptional accuracy and efficiency. With a generous working area measuring 914 x 305 mm, a rapid 6000 rpm spindle speed, and a robust 6 kW motor, the Haas Minimill HE is your ultimate choice for precision machining and top-tier manufacturing. Technical specifications: Year: 2008 Made in: USA Control unit: Haas X-Axis travel: 406 mm Y-Axis travel: 305 mm Z-Axis travel: 254 mm Table length: 914 mm Table width: 305 mm Spindle speed: 6000 rpm Spindle taper: SK 40 Motor power: 6 kW Tool magazine: 10 pieces Dimensions: Length: 2000 mm Width: 2000 mm Height: 2500 mm Weight: 2200 kg Features: -Enlarged Z axis departure by approx. 70 mm working compared to the standard Minimill versio ...

Description: TEXT Approx. Onsite Dimension. (l x w x h): 4,800 x 600 x 1,350 mm, weight approx.: 300 kg

Hopper opening 400x780mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 2,2kW 3-phase 400 V/50 HZ480 V LxHxW 2220x1600x630 mm, Possible additions: exit tray, tub for tray, Stainless Steel version, See the chart below for more sizes, installed power : 2.2

Description: Punching shear Punching force: 45 Tn Max. standard steel thickness: 7 mm Max. punching diameter: 28 mm Strokes per min: 16 Foot operated weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm

Description: travels: X-axis: 350 mm Y-axis: 300 mm resolution: ,0.0005 mm repeatability: (2s) 0.002 mm  , export not possible x-motion: 350 mm, y-motion: 300 mm, weight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm

Martin Miniline 616, - Vacuum feeders, - Max.Speed: 24,000 Sh/h, - Max.Size: 600x1600 mm, - Year 1974/1991, - 2 Color Flexo, - Slotter, - Rotary die cutting, - Folding gluing, - Counter Ejector, Year 1991

Description: Including operation and maintenance manual Approx. Onsite Dimension. (l x w x h): 800 x 800 x 800 mm, weight approx.: 100 kg

2 labels fron and back with capsuling machine More then 300 machines new and second hand on our seema .de

Cold vacuum glass sealing machine, make Coudert Massiservices, type Minic Plus, year 2013, The packaging is transported on a conveyor belt via an infeed screw into a transfer star, transported. By rotating the star counter-clockwise, the, Packaging passed through the closure gripping station, the closure is placed on the packaging, set and both are transported to the sealing station., As the first phase of the bolting process, a bell is placed over the upper part of the packaging, in the second phase one encloses, semi-inflatable membrane the edge of the lid and in the third phase is created by a negative, pressure difference a vacuum in the package, in the fourth stage the lid is tightly screwed,, the membrane detaches, the bell rises and the sealed package is released from the, Sealing machine transported out., The machine works with 4 capping heads, which close one after the other in  ...

Micro blowers instead of compressed air operated nozzles, e.g. for installation in front of the Inkjet coder for drying the coding area, full aluminum housing, protection class IP 67, integrate Electronics, power consumption: max. 190 watts, compact, quiet (55db(A)) and efficient, Flow rate at 43,000 rpm: min. 160 l/min., pressure: 119 mbar, optionally with power pack., This small and quiet 24 volt blower, IP67, has incredible power. See for yourself !, - Energy savings up to 90% compared to compressed air applications, - easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts