mini lab used for sale

plate thickness: 4 mm blade length: 150 mm cutting angle: 30-120 ° Table dimensions: 1000x650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm cutting angle adjustment: 30-120 ° table height: 900 mm : 407 weight of the machine ca.: 760 kg dimensions of the machine ca.: 1300x1000x1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimension of workpiece: - mm voltage: - V accessories and equipment:: ASUS All-in-One PC total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m http://www.ibendorf.de/ecmc.html The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of milling spindles: 2 St. fence: ja ja /nein workpiece: ja STEGHERR Cross-bar Milling Machine, Type KSF-mini -------------------------------------------------- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERRs extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors, workpiece clamping is pneumatic. The profile cutter is designed to match the web width. The saw blades that perform the ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JUNG Minini JMF 900 ist eine CNC Flachschleifmaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tisch 900x400 mm; Längsweg X 1000 mm, Querweg Z 500 mm, Vertikalweg Y 400 mm; max Werkstückgewicht 1000 kg; Schleifscheibe Ø400x50 mm. Schleifspindelmotor 7,5 kW, Anschluss 3x380 V 50 Hz; Maschinenlänge 3000 mm. Zubehör: Magnetplatte 800x500 mm, Abrichtvorrichtung, Satz Flansche, Auswuchtdorn, Lampe. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizin und Uhrenindustrie. Technische Daten ohne Gewähr

LNS Hydrobar Mini Sprint 20 ist ein Stangenlademagazin mit Präzision, hoher Genauigkeit und Zuverlässigkeit. Ausführung: Rechts; Stangendurchmesser rund von 3 mm bis 20 mm; Stangenlänge max. 3000 mm. Anschluss 50 Hz 3x 380 Volt; Abmessungen LxBxH 5270x1000x1300 mm. Ermöglicht enge Toleranzen und eignet sich für Automotive, Uhrenindustrie, Maschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

LNS Hydrobar Mini Sprint 20 ist ein Stangenlademagazin, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbereiche: Stangendurchmesser rund von 3 mm bis 20 mm; Stangenlänge max. 3000 mm. Technische Hauptdaten: Anschluss 50 Hz 3x 380 Volt; Abmessungen Maschine L×B×H 5270×1000×1300 mm. Eignet sich zur Erreichung enger Toleranzen und für Branchen wie Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

LNS Hydrobar Mini Sprint S2 ist ein Stangendladermagazin hoher Präzision, ausgelegt auf hohe Genauigkeit und Zuverlässigkeit beim Zuführen von Material. Aufnahme von runden Stangen Ø 3 mm bis 45 mm, maximale Stangenlänge 3200 mm; Ausführung links. Wichtige technische Angaben: Maschinenmaße L 4000 × B 500 × H 1500 mm; kompakte Bauweise für einfache Integration. Entwickelt zur Erreichung enger Toleranzen; typischer Einsatz in Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

IEMCA CNC MINI BOSS 325 ist ein Stangenlademagazin, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Ausführung: rechts; Stangendurchmesser rund 3–25 mm; Stangenlänge max. 3200 mm. Anschluss 50 Hz 3x 400 V; Abmessungen L 4000 mm × B 600 mm × H 1600 mm. Mit Zustandsleuchte. Ermöglicht enge Toleranzen und eignet sich für Branchen wie Automotive, Uhrenbau, Maschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

LNS Mini Sprint S2 ist ein Stangendurchlademagazin (Bar feeder/loader) für Präzision, hohe Genauigkeit und Zuverlässigkeit. Verarbeitet runde Stangendurchmesser von 2 mm bis 32 mm; maximale Bestückung 3270 Stangen. Technische Daten: Anschluss 50 Hz, 3x 380 V; Abmessungen L 4180 mm x B 1000 mm x H 1300 mm. Ermöglicht enge Toleranzen und eignet sich für Automobil-, Luftfahrt-, Medizintechnik-, Uhren- und Werkzeugmaschinenbranchen Technische Daten ohne Gewähr

LNS Hydrobar Mini Sprint S2 ist ein Stangenlademagazin, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Ausführung: Rechts; Stangendurchmesser rund von 3 mm bis 45 mm; Stangenlänge max. 3200 mm. Maschinengewicht ca. 600 kg; Abmessungen Länge 4000 mm × Breite 550 mm × Höhe 1500 mm. Ermöglicht das Erreichen enger Toleranzen und eignet sich für Branchen wie Automobil, Uhrenindustrie, Werkzeugmaschinenbau, Luft- und Raumfahrt und Medizintechnik Technische Daten ohne Gewähr

LNS Hydrobar Mini Sprint S2 ist ein Stangenlademagazin, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Ausführung: rechts. Stangendurchmesser rund von 3 mm bis 45 mm; Stangenlänge max. 3200 mm. Anschluss 50 Hz, 3x 230 V; Maschinengewicht ca. 600 kg; Abmessungen L 4000 mm × B 1000 mm × H 1500 mm. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 € : 248.64 € : 0.4 - 2 mm : 300 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used dough dividing machine / head machine KÖNIG, type: Mini Rex 4000 TR-FS -in good condition- - Stamp size SK58 for small weights 30 - 80g - Stamp size AK70 for larger weights 75 - 140g - Capacity up to 4,000 pieces per hour - 2 rows - the machine has recently been serviced - Condition: good, ready for immediate use Visits and test runs are possible by arrangement. We will be happy to send you further information on request.

Used dough dividing machine / head machine KÖNIG, type: Mini Rex 4000 TR-AB -Refurbished in 2023- - Weight range up to 140 g per round-rolled dough piece - Capacity up to 4,000 pieces per hour - 2 rows - All wearing parts, such as bearings, antiebe, electrics and belts have been renewed - Condition: Very good, ready to use Visits and test runs are possible by arrangement. We will be happy to send you further information on request.

Description Item # 9373 - ONE SHOT DEPOSITOR Manufactured by AWEMA Model MINI-101 Year 1998 415Volts, 50Hz Capacity up to 150Kgs per hour Large depositing range with up to 80mms piston stroke Maximum piston diameter 25mms The machine powers on but the computer battery has stopped working so it won't store any preset programs (this battery can be replaced) All moving parts still work, but the machine needs servicing, the machine includes 2 dosing plates

Dough divider / head machine KÖNIG, type: Mini Rex Multi AB -Very good condition- - Head machine / dough divider: KÖNIG Mini Rex Multi - Incl. 4 stamp strips - 3 stamping bars for dividing and rounding: 20 - 40g, 40 - 90g, 80 - 150g - 1 stamp bar for dividing but not rounding: 60 - 90g - 8 - 330g possible with stamp bars 1 - 3 rows - Computer control - Very good condition, everything technically checked - Ready for immediate use Visits and test runs are possible by arrangement.

BioMérieux Mini Vidas Immunoassay System Model: 440416 Dimensions (W x D x H): 550 x 450 x 575 mm Weight: 40 kg

Key data: 45 °, 2250 mm, 900 mm

400 V, 50 Hz, 5 Kw, 10 A, Sliding table 2250x270 mm, Boom table 950x600 mm, Cut-to-length stop 2650 mm, extendable, Cutting width 900 mm, Cutting height 90 mm, Saw blade 250-315 mm, Extraction connection 125 mm, Work table 1500x1000 mm, Weight 410 kg

Functional machine with tear strip device; but needs to be prepared. Film width 50 - 280 mm Product dimensions min. 40 x 20 x 7 mm Product dimensions max. 215 x 165 x 80 mm Max. production 75 packs/min. Length x width x height: 1310 x 900 x 1600 mm (plus infeed belt) Weight approx. 600 kg Location: Cologne

Incubator Shaker (stackable benchtop shaking incubator)2 units in a stacked configuration (photographed together)

A Geka ironworker with integrated punching unit for punching and shearing flat bar, section steel and bar stock is offered. Punch diameter/material thickness: 28mm/13mm, flat bar shearing capacity: 300mm×10mm/200mm×13mm, max. round bar diameter: 30mm, max. square bar dimensions: 30mm×30mm. Including tool cabinet with various punch and die units as well as a stop extension to 3m. The flat bar and section steel shearing units were hardly used. An on-site inspection is possible.

Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage.

This piston pump is ideal for well drainage or dewatering work , 2 pieces in stock. NEW and unused. Directly usable, , Throughput capacity: 30 m3/h, Max. head: 22 MWK, Max dirt passage: 1500 rpm, Weight: 625 kg, , = More information =, , Year of manufacture: 2026, Empty weight: 625 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a cal ...

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

Gernep labelling machine type Labetta 4 / 3 / 10 640 A year of manufacturing: 2013 capacity: 7.500 bph work direction: right to left rotation: clockwise Stainless steel bottom frame instead off standard carbon steel bottom frame Format parts for: - 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. - 2 different front label format parts 33 cl longneck; - 75 cl Bierre Belge bottle Corked; Neck, front and back label. Air driven glue pumps replaced by electrical driven glue pumps. Introduction wraparound labeler 2020, less wet glue labels since then. Incidental residual wet glue labels ran still May 2022 (remaining stocks) - machine conserved. Machine still in bottle line for conveyor use only, but stilll able to run. The machine is still in production until the mid of November 2023

Y.O.M.: 1999 No.: 900/1 Scraper and Homo speed-controlled Vertical stroke, double jacket, swivel Temperature gauge, Vacuum, Ystral-Turrax Temperature control device GWK Type teco CS 90 Y.O.M.: 2002 Heating capacity: 9 kW Cooling capacity 23 kW, temperature maximum 95°C Dimensions LWH: 1200 x 800 x 1000 mm Weight: approx. 100 kg

shaking machine, laboratory sample vibrators, Manufacturer Gerhardt Type Laboshake LS500 Very good condition, ready for immediate use 230 Volt 800 watts Lcqmcmwr

Scraper and homogenizer (Ystral) speed-controlled Vertical stroke, double jacket swiveling with heating and vacuum pump on a mobile cart switchgear, timers, etc. Condition very good Dimensions LWH: 700 x 600 x 1900 mm Weight: approx. 150 kg

Pulverisette, Analysette, Laboret 03.502 Lab vibrators according to posted photos. With lid and straps, scope of delivery according to photos. Programs: -Inter -Perm -Micro Adjustable Bfukypvbsu

Kosme Hot Melt Labeller Capacity 8 000 b/h

Used Used labeller Cavagnino&Gatti 4.000 bph: Year: 2002 Condition: As Is Used Labelling machine Cavagnino & Gatti Year: 2002 Speed: 4.000 bph Clockwise direction Bottle? s equipment for conical bottle ? 78 diameter 2 adhesive station to apply: Front Back 1 glue station to apply ?I? seal Safety protection Code: EA 84 More details: https://bottlingscout.com

Used Used labeller Cavagnino&Gatti 5.000 bph: Year: 2008 Condition: As Is Used labeller CAVAGNINO&GATTI 9T 3S Year: 2008 Speed: 5.000 bph Direction: Counterclockwise 9 heads 3 adhesive stations Safety protections Code: EA 438 More details: https://bottlingscout.com

Used Used labeller P.E. 4.500 bph: Year: 1998 Condition: As Is Used labeller P.E | 8T adhesive Year: 1998 Speed: 4.500 bph Direction: Counterclockwise 8 heads Nr.3 adhesive stations Nr. 2 cold glue stations Safety protections Code: EA 448 More details: https://bottlingscout.com

Used Used labeller Kosme 4.000 bph: Year: 2003 Condition: As Is USED LABELLER KOSME Year: 2003 Speed: 4.000 Bph Direction: Clockwise Number of heads: 8 Number of cold glue stations: 3 Type of application: Front label Back label Collar Additional ironing on exit Safety protections Code: EA 627 More details: https://bottlingscout.com

Used Used labeller P.E. Rollmatic 12.000 bph: Year: 2009 Condition: As Is EA 635 | LABELLER P.E ROLLMATIC 12T | 12.000 BPH Year: 2009 Speed: 12.000 bph Direction: Counterclockwise 12 heads Subitale formats: 1.0 LT | 1.5 LT Label: Wrap-around | OPP hot melt Safety protections Code: EA 635 More details: https://bottlingscout.com

Used Used Labeller 9T CE 5.000 bph 2018: Year: 2018 Condition: As Is Year: 2018 Speed: 5000 BPH Direction: Clockwise Electric carousel regulation 9 plates with electronic cams 4 station agganciabili 2 cold glue station 2014, reconditioned 3 station carrellate 2016, reconditioned for adhesive non-stop label 1 station carrellata 2016, reconditioned for adhesive label Optical centering setup Safety protection Code: EA 672 More details: https://bottlingscout.com

Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)

Used automatic labeling machine for cylindrical packaging, for self-adhesive labels (paper or foil), produced by ETMA, Germany, model R-TB - 150/2000. New: 1995 Marking labels with batch number / expiry date: hot-stamping.

Used labeling machine P.E. LABELLERS model Universal M / S 6T / 540 / 2S-2E Power required: 3kW Required pressure (demand): 5 bar (15 l / min) Capacity: 80 pcs / min (jars - 1 format) The device allows labels to be applied to the front and back of the package. The device is equipped with one type of format. When using other formats, it is possible to cover jars of 0.3-0.9 liters. The device has a buffer sensor for jars that are fed into the labeller. A cold label gluing system is used.

Used Used Kosme Labeller 8T CE CO 5S Adhesive 5.000 bph: Year: 2007 Condition: Reconditioned Year: 2007 Speed: 6.000 bph Direction: Counterclockwise 8 heads Electronic cams Optical centering 5 Adhesive Stations: - 3 Adhesive Stations Kosme - 2 Adhesive Stations Makro Various formats available included Safety protections Code: EA 657 More details: https://bottlingscout.com

Used Used Labeller P.E. Master M 6T Adhesive: Year: 2004 Condition: As Is Used Labeller P.E. Master M 6T Adhesive: Model: MASTER M 6T 540 2S 2E Year: 2004 Speed: 3.000 bph Direction: Counterclockwise 6 heads 2 adhesive stations 2 labels, front and back Safety Protections Layout macchina Code: EA 659 More details: https://bottlingscout.com

Used Used Krones labeller Roll-Fed 12.000 bph: Year: 1995 Condition: As Is Used Krones labeller Roll-Fed 12.000 bph: Model: Contiroll Year: 1995 about Speed: 12.000 BPH Direction: Clockwise 15 heads Mechanical cam plate 1 station Type of station labeling: roll fed Safety protections Code: EA 665 More details: https://bottlingscout.com

Used Used Labeller 2016 STS 5.000 bph: Year: 2016 Condition: As Is Model: S3T6/R Year: 2016 Speed: 5.000 bph Direction of rotation: Clockwise 6 plates 3 adhesive stations Labeling type: ? Adhesive Types of applicable labels: ? Front label ? Back label ? Neck/shoulder label Mechanical cams Safety protections Code: EA 667 More details: https://bottlingscout.com

Used Used Labeller P.E. Master M/S 5.400 bph: Year: 2014 Condition: As Is Used Labeller P.E. Master M/S: Model: Master M/S Year: 2014 Speed: 5.400 BPH Direction: Clockwise Electric head adjustment 6 heads Mechanical cam plate 3 Adhesive Stations Applicable label: ? Front ? Back ? Collar Safety protections Tunnel drying Tardito ? 2014 Speed: 3.000 bph Air blade system Code: EA 668 More details: https://bottlingscout.com

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

Used Used labeller Eticap Adhesive 3.000 bph: Year: 2002 Condition: As Is Used labeller Eticap System: Model: AR-M 5T 3S CA Year: 2002 Speed: 3.000 bph Rotary Direction of rotation: Counterclockwise ? from right to left 5 plates 3 adhesive stations Types of applicable labels: ? Front label ? Back label ? Neck/shoulder label Safety protections Code: EA 671 More details: https://bottlingscout.com