mini crane used for sale

Compact bread roll line KÖNIG, type: GS 2000 For Kaiser rolls, long rolls, hot dog buns, normal round buns and flattened ones for hamburger buns. - Mini Rex 4000-S head machine - Weight range: 30 - 135 g - Knitting drums: SK58 and AK70 - Weight range: approx. 30 - 135 g - Capacity head machine: max. 4,000 pcs./h - Proofer capacity: max. 2,500 pcs./h - Condition: Good, well-maintained and technically tested by us - Ready for immediate use Visits and test runs are possible by arrangement.

Tube filling and sealing machine with hot air unit for filling and sealing PE and laminate tubes, Output depending on tube size, filling volume and viscosity of the filling product approx. 15-20 cycles / min. incl. cooling unit

Bacciottini Pit Stop Mini Creasing Machine; cleaned and tested; Max. sheet format 350x300mm, min.100x150mm; Paper weight 80-400g; 3 tools (2xgrooving tool, 1xperforation); Program memory. Creasing machine Bacciottini Pit Stop Mini; cleaned and checked; max.paper size 350x300mm, min.100x150mm; paper weight 80-400g; three tools(2 creasing, one perforating); Program Memory.

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

SPECIFICATIONS: Installed power: 2.2 kW 02 Cotton bags: Ø 450 mm

1.7 t net weight, with dozer blade

Takeuchi TB108 - mini excavator, - Year of construction: 2009, - Dead weight: 860 kg, - Engine power: 7,1 kW

Vertical Machining Center MINIMILL HE - travel X (mm) : 406 - travel Y (mm) : 356 - travel Z (mm) : 381

Inv. Num. : 8820 Type: MINI-88 Y Producer: POLY GIM Created: 2007 Parameters: Control System: MITSUBISHI Max. turning diameter: 25 mm Maximum length of travel in the X-axis: 165 mm Maximum length of travel in the Y-axis: 148 mm Maximum feed in the Z-axis: 150 mm Maximum spindle speed: 6000 1/min Spindle bore: 34 mm Max. rod diameter: 26 mm Length: 1200 mm Width: 1000 mm Height: 1500 mm Weight: 1058 kg Equipment: Conveyor Y-axis Bar Feeder FEDEK STM-326

Used bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In bakery condition- Compact bread roll line - Mini Rex Futura-S head machine - Can also be rotated to look only round and take off directly - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - With tools for emperors - Condition: good, everything checked - Machine is still being cleaned The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Dimensions (L/W/H): 940x1250x1400 mm Weight: 250 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1240x710x1200 mm Weight: 225 kg Total power requirement: 2,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 1500x1100x1500 mm Weight: 300 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Item condition: in working order Availability: immediately

Heraeus Minifuge RF Analog temperature setting: -40 to 30°C Speed 0 to 6000 rpm, analogue adjustable Timer 0 to 60 min or continuous Rotor Sepatech 3360 for 4 uses, max. speed 6000 rpm Brake function Automatic imbalance shutdown Automatic lid locking during use Dimensions: approx. 68 x 67 x 56 cm (W x H x D) Weight: 70 kg More items - new and used - can be found in our shop! International shipping costs on request!

Plant is sold checked and cleaned. Condition: fully functional, signs of use Availability: immediately Sowing: available Weights (rolls): from 50 g Seeding station: yes

Inv. Num. : 8854 Type: MINIMILL HE Producer: HAAS Created: 2006 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 305 mm Maximum table load (uniform): 227 kg Spindle drive power: 7.5 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 406 mm Y-axis travel: 326 mm Z-axis travel: 381 mm Cone: ISO 40 Number of all tools: 10 pieces Machine height: 2565 mm Machine length: 2119 mm Machine width: 2077 mm Machine weight: 2018 kg

Minipack RAS FM76 shrinkwrapper With automatic transport after the sealing has been completed on a movable frame size: 500x380x200 mm

JCB 16C-1 mini excavator, - only 893.5 operating hours, 

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

Size: 0x0 Equipments: Semi-automatic and automatic foil packaging machines Minipack Sealbag sealing machine For packaging printed materials such as magazines, booklets, and other printed materials Easy to operate and adjus

Mini Rustica Guillotine + Die Cutter Item condition: fully functional Availability: immediately

Planing width mm 260 Dressing table length mm 1040 Max. saw blade diameter mm 250 Saw blade spindle mm 30 Max. saw blade protrusion from the table at 90 mm 75 Max. saw blade protrusion from the table at 45 mm 60 Cutting width at the rip fence (longitudinal cut) mm 500 Milling machine Max. usable spindle length mm 75 Milling machine Max. tool diameter for profiling mm 160 Milling spindle speed rpm 4000/6500 3 motors in V.230 1 PH  

Brand: Nordson PPS Type: Vacuüm oven Model: JCP Mini 2424 Dry Air Quantity : 200 m3 / h Dimensions (LxWxH): 910 x 755 x 1.120

- Hood shrink tunnel - Semi-Automatic

Used dough divider / head machine KÖNIG, type: Mini Rex 4000 - AB -in bakery condition- - Tested and cleaned - Strap in very good condition - Condition: Good, ready to use - Video on request - Number of rows: 2 rows - Output: max. 4,000 pcs./h - Weight range: 25 - 130 g - El. Connection: 1.3 kW, 3x 400 V+N, 6 A, 50 Hz Visits and test runs are possible by arrangement.

AD planer Minimax 310, good condition, 2.2 kW, 200 kgPrices subject to change, errors, printing and typesetting errors excepted

4-speed Kombi Minimax LAB300b, year 2021, very good condition, 3 kWPrice subject to change, errors, printing and typesetting errors excepted

Used dough divider / head machine KÖNIG, type: Mini Rex Multi - Head machine / dough divider: KÖNIG Mini Rex Multi - Weight range: approx. 20 - 120g - Weight range from 8 - 330g possible by changing the weighing drum bars - 2 rows - Computer control - Incl. various stamping tools - Very good condition, ready for immediate use Visits and test runs are possible by arrangement.

plate thickness: 4 mm cutting angle adjustment: 30-120 ° table height: 900 mm : 407 weight of the machine ca.: 760 kg dimensions of the machine ca.: 1300x1000x1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU300W571 No.18022 Year of construction1998 LocationBarneveld Main Features MaterialStainless steel Vacuumcheck Surface0.6 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,6 m² Number of plates4 Plate sizes508x305x40 mm Between the plates56 mm With cooling compressorcheck Cooling mediumFX 80 MaterialStainless steel 1.4404 (316L) Information MakeSociete Nouvelle Usifroid Syrius TypeMinilyo SMH 45 Mounted on wheelscheck With switchgearcheck Floorspace1,29x0,88 m Total height1,95 m Weight700 kg Extra SpecificationsProcess de-icing, hot gas, Nominal ice cap, 20 kg With laptop control Freeze dryersSociete Nouvelle UsifroidDryers > Freeze dryersBrand > Societe Nouvelle Usifroid What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide --  ...

Maximum product dimensions (width) 400 mm Maximum product dimensions (height) 240 mm Maximum product dimensions (length) ∞ Maximum coil dimensions (Ø x length) 350x700mm Infeed belt height 870 mm (with rollers) 830-910 mm (with feet) Machine dimensions (guards open) 2893x1340x1558 mm Machine dimensions (guards closed) 2893x1820x1980 mm Hourly production 3600 p/h The PRATIKA 56 MPS X2 is a servo-assisted automatic shrink wrapping machine, equipped as standard with the Side Seal device, a continuous sealing without length limitation as well as center sealing and fully electric operation. This machine, suitable for packaging formats up to 400 mm wide and 240 mm high, has been in all mechanical and electronic components to achieve a production rate of up to 3600 pieces per hour (depending on the product dimensions and the film). PRATIKA 56 MPS X2 thus represents a perfec ...

TECNOVA RECYCLING EXTRUDER, mod.Mini 60 mm., for PE PP scraps, throughput rate around 127 kg/h, buffer silo, forced feeding unit, extruder with 60 mm screrw diam., 35,3 kw drive, semi-automatin changer, water ring pelletizer, drying centrifuge, electric cabinet for whole management., installed power - used power in work: about 60-65% : 35,3 kw, capacity: 127 kg/h depending on materials, conditions: used, in good conditions

Code: 0292 Brand: SCM MINIMAX Model: FORMULA F1 - CE Standard Surface planer for planing wood materials, plastics, composite materials and various - CE Standard Technical data: Working width mm 410 Table length mm 2610 N° 4 knives Shaft diameter mm 120 Shaft rotation speed rpm 5000 Guide tilting from 90° to 45° Max stock removal mm 8 Motor power Hp 5,5 Table height from ground mm 845 Suction hood diameter mm 120 Overall dimensions mm 2610 x 900 x 1070 h Weight kg 575

General SKU347W887 MakeZanchetta / Ima LocationBarneveld CEcheck TypeCyclops Mini Main Features MaterialStainless steel Volume300 Ltr. Motor2.2 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity30-300 ltr With motor2.2 kW (400 V, 1430 rpm (Ex)) MaterialStainless steel Information No.V2C001 Year of construction2008 With switchgearcheck (0.53x1 m) Floorspace1.90x 1.20m Total height2.24 m Weight1560 kg Extra SpecificationsCapacity of standard containers: 30-300 ltr (containers not included) Recommended filling coefficient: 30-75% Maximum working load (bin + product) 250 kg Rotation speed: 4-20 rpm Tumbler mixersIMA ItalyMixers > Tumbler mixersBrand > IMA Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details.

We offer industrial equipment for restaurants, bakeries, cafes. Everything is in working order, used. We are open to negotiations on price and delivery. METOS Mini R10 Furnace 400V, 24kW

MINIMAX thickness planer model S41 ELITE S: - working width 410mm - useful working thickness from 3 to 240mm - motorized lifting with digital display - 4-knife shaft - Motor power 4 kW / 5.5 HP, 380 volts - 2 feed speeds 6 – 12 mt/min Year 2013, CE regulations

The original build year of this machine was 1998. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. The spindle bearings were replaced with high-precision ball bearings 14 days ago. The spindle is now running with 0-1 µm accuracy and is very quiet. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 16 (warming-up program) Measu ...

The original build year of this machine was 1999. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Step Tools Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 4 (step tools) Software package 6 (woodworking tools) Software package 8 (taps) Software package 16 (warming-up program) Software package 32 (contou ...

Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts

Bread roll line Lippelt Mini-Rustica GST Head machine for special square rolls with guillotine and punching device Belt flour for infeed belt Touch control, Rumo Seed Station Connection 400V, 16ACEE plug Used machine from the bakery

Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long

Manufacturer : LippeltType : Rustica MiniYear of construction : 98with 3 rollers400 Volt 1,1kWDetails see picture

Shelf shop oven quail Piccolo MiniProduct descriptionManufacturer: WachtelType: Piccolo MiniYear of construction: 06/2014Condition: used, baker's condition - please clean thoroughly before useper floor 1x 60x40 cm trayswith base cabinetControl: DMS 3 MASTER EM 100 GLASelect. Connection value: 15.2 kWSvoltage: 400 V AC/3Ph/N/PE/50 HzWithout exhaust hood as can be seen in the photosDetails see pictures.

 Brötchenanlage Lippelt Mini Rustica Manufacturer : Lippelt Type : Mini Rustica Year of construction : 99 with 2 rollers 400 Volt 1,1kW Baker condition We have 2 pieces in stock  Details see picture       

König Mini Rex 4000 Roll Plant  Product descriptionManufacturer: KönigModel: Mini RexType: 4000 TR/G-S SKG58+RK58Year of construction: 2007Roll plantModel: G 2000Type: SA2König G2000 Compact plant for round-knitted, stamped, oval or folded-long-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeriesCompact pre-proofer system with Mini Rex Futura head machinemax. Hourly output in proofer operation: 2,000-2,500 pieces, infinitely adjustable for higher output