mini crane used for sale

Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other) Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg

Description: Loading capacity max 120 kg Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 750 mm, weight approx.: 21 kg

Description: Loading capacity max 120 kg Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 750 mm, weight approx.: 21 kg

Description: Loading capacity max 120 kg Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 750 mm, weight approx.: 21 kg

Description: Loading capacity max 120 kg Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 750 mm, weight approx.: 21 kg

Description: Loading capacity max 120 kg Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 750 mm, weight approx.: 21 kg

Description: Serial number: 22C050362 Operating hours read: 86.4 h Own weight: 880 kg Capacity: 0.025 m³ Power: 7.6 kW Equipment: with front-mounted dozer blade, Seats: 1 with 2 pcs. Armrests, still wrapped, with backhoe W approx. 360 mm, 1 pc. Grapple B 610 mm, 1 pc. Slope bucket with swivel function W approx. 750 mm, 1 pc. Backhoe bucket B 170 mm, 1 pc. Ripper B 500 mm, 1 pc. Earth auger L approx. 1,400 mm, 1 pc. Hydraulic chisel with attachment L approx. 950 mm Condition note: various abrasions and paint damage all around mini excavator Location: A-3242 Texing Approx. Onsite Dimension. (l x w x h): 2,500 x 1,000 x 2,200 mm, weight approx.: 1,000 kg

Description: Unused 1000W battery 48v 32ah working time 8-10 hours charging time 6-7 hours dimension bin inside 1080x670x475mm with charger in transport crate building kit, crate and want to be assembled 6526 Approx. Onsite Dimension. (l x w x h): 1,750 x 730 x 1,080 mm, weight approx.: 500 kg

NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in a timely manner

NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in a timely manner

Description: CASE CX80C Mini Excavator PIN  , ,DCH080R6NGE6B160 Approx. Onsite Dimension. (l x w x h): 6,680 x 2,320 x 2,760 mm, weight approx.: 8,690 kg

Description: RHINOCEROS XN10 Mini Excavator no.  , ,21F051077 50 hours according to counter Approx. Onsite Dimension. (l x w x h): 2,770 x 1,190 x 1,850 mm, weight approx.: 850 kg

This portal crane can be moved all over your workshop floor thanks to the pneumatic hovering system, the requirement to be able to use this is that the floor needs to be perfectly smooth. Max height under lifting hook: 2000 mm Lifting capacity: 5 ton Kind of: portal crane Capacity: 5 ton Span: 4 meter Drop: 2 meter

all movements are motorized 1 ton chain hoist

Hoffmann rail crane, track 1m, telescopic crane extension 16m, lifting load 16t, electric overhead drive, or MAN diesel engine. Weight approx. 45t. For questions 0049 1604444300 net price 12.500,-€

Mounting crane for wheel loader O&K Type.L8-1 Extendable up to 3m.

1 factory-tested pillar crane Payload 1000 kg Reach 5,000 mm Height approx. 4,000 mm Bottom bracket 3,170 mm Make of ABUS Workshop examination 2015 Electric chain hoist, floor operation with a new coat of paint Working speeds: Hoist around 1.5 / 6.0 m / min Trolley gear by hand Slewing gear by hand

1 factory-tested, well-preserved pillar jib crane Payload 1000 kg Projection about 6,360 mm Overall height approx. 3,350 mm Bottom bracket approx. 2,850 mm make of ABUS Workshop examination 2015 equipped with an electric chain hoist, floor operation on the boom moveable, and a new coat of paint Working speeds: Hoist around 1.0/4.0 m / min Trolley gear by hand rotation by hand The photos show a sample crane

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

Crane hook Capacity: 0,7 tons Crane hook is fully functional, but not suitable for our requirements.

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

2 factory-tested, well preserved double girder cranes Load capacity 5000 kg Wingspan approx. 13.630 mm Hook way approx. 4,000 mm Fabrikat MAN-SWF Year of production/workshop test 1995/2016 Cranes, floor control, freely movable equipped with SWF double girder trolleys, travels to the lower straps of the crane bridges Working speeds: Hoist approx. 0.8/5.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed

2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, absolutely Mint double girder crane as crane trolley with 2 elevators, particularly suitable for traverse operation Load approx. 2 x 6,300 = 12,600 kg Span 14,950 mm hook path about 6,000 mm Make steel Year of production/workshop inspection 2002/2016 Crane equipped with Swivel trolley, maintenance stage, split head support for optimal wheel load distribution, radio control working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear about 2.5/10.0 m / min Crane chassis up to approx. 40.0 m / min

1 factory-tested, well preserved steel double girder overhead travelling crane Load approx. 16,000 kg Track width approx. 13,500 mm hook path approximately 3,600 mm Katz gauge approximately 4,200 mm Year of production / workshop test 1990/2016 Crane equipped with double girder trolley and steel drive units suitable for traverse operation, radio control, catwalk and overload protection Working speeds: Hoist CA. 0.6/4.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 4.0/16.0 m / min

1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min

Capacity 20.000 kg Wingspan approx. 9,450 mm Hook way approx. 23,000 mm Make HEIMANN/SWF Year of production/workshop review 2006/2016 Crane radio control equipped with SWF double girder trolley, Working speeds: Hoist approximately 0.67/4.0 m / min Katz LG 5.0/20,0 m / min Crane chassis up to 30.0 m / min

Crane hook Capacity: 80 tons Crane hook fully functional, but not suitable for our use.

4 factory-tested, very well preserved double girder cranes Load approx. 20.000 kg Wingspan approx. 16.650 mm Hook path about 5.000 mm Fabrikat MAN/SWF Year of production/workshop test 1995/2016 Cranes equipped with SWF double girder trolleys with reduced design to minimize the installation height, freely movable floor control Working speeds: Hoist approximately 0.32/3.2 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved pillar jib crane Payload 500 kg RADIUS approx. 2,300 mm Overall height approx. 2,600 mm Bottom bracket approx. 2,350 mm Hook way approx. 4,000 mm make SWF Workshop inspection, 2017 equipped with an electric chain hoist, floor operation on the chain hoist movable working speeds: Hoist around 4.0/16.0 m / min Trolley gear by hand rotation by hand